Housing Kit Compl. (41-43/50/54/56/61) Service Kit

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 98
Model: TCAG0230-SK11
Weight: 0.57kg
Pack Dim: 220.00mm x 110.00mm x 108.00mm
UPC: 6009515877613

Price:

R 175.95

Ex VAT: R 153.00

Available Options

Stockist

Tork Craft Housing Kit Compl. (41-43/50/54/56/61) Service Kit (TCAG0230-SK11)

At a Glance: Complete housing component kit (parts 41–43, 50, 54, 56 & 61) for the Tork Craft TCAG0230 angle grinder

The housing of an angle grinder is more than a shell — it’s the structure that holds the motor aligned, protects wiring from dust and strain, supports the switch area, and gives you a solid, safe grip. If the casing is cracked from impact, screw posts are broken, threads are stripped, or the housing no longer closes tightly after servicing, the grinder can feel loose, noisy, and unsafe. The Tork Craft TCAG0230-SK11 Housing Kit Complete replaces the housing-related components referenced as parts 41 to 43, plus 50, 54, 56 and 61, helping restore correct fitment, protection and a “tight” feel to your TCAG0230.

A fresh outer structure for a cleaner, safer rebuild

Designed for the Tork Craft TCAG0230 platform, this kit is ideal after impact damage, workshop rebuilds, or when internal repairs require replacing worn or damaged housing sections. Fit the correct housing parts, route wiring neatly, and bring the grinder back to a solid, confidence-inspiring feel.

Extra Information

Compatibility: Intended for the Tork Craft TCAG0230 angle grinder series.
During installation, confirm wiring is routed correctly and not pinched between housing sections.
Use the correct fasteners and avoid over-tightening to prevent stripping new posts or threads.
Inspect the cord entry/strain relief and switch seating while the housing is open.

Pro Tip

Do a “dry fit” before final tightening: place switch and wiring in position and check nothing sits proud. Tighten screws evenly (alternate sides) to avoid twisting the housing, then do a short no-load test run to confirm everything feels solid and normal.

Features

Housing repair kit: Replaces the key outer housing components used in the TCAG0230 assembly.
Parts reference match: Covers parts 41–43, 50, 54, 56 and 61 as per the service diagram references.
Restores secure fitment: Helps correct loose closures, broken posts and misalignment caused by damaged housings.
Model-specific compatibility: Intended for use with the Tork Craft TCAG0230 angle grinder.

Benefits

Safer handling: A solid housing supports safe grip and protects wiring and internal components.
Reduced vibration from movement: Properly seated housings help prevent internal shifting and rattling.
Extend tool life: Replacing damaged casings helps protect motor components from dust, knocks and strain.

Safety

Wear eye protection and a dust mask when opening the tool and cleaning internal debris.
Disconnect power before opening the tool or fitting any spare parts.
Ensure all internal wiring is correctly routed and insulated — pinched wires can cause electric shock or failure.
After reassembly, confirm the guard is correctly fitted and the spindle rotates freely before use.
Perform a no-load test run in a safe area and stop immediately if you smell burning, hear rubbing or feel excessive vibration.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAG0230-SK11
Product Type	Spare Part Service Kit
Component Group	Housing Kit Complete
Parts Reference	41–43, 50, 54, 56 & 61
Compatible Tool Model	TCAG0230