Bearing Cover & Baffle (30/31/32/36) Service Kit

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 102
Model: TCAG0230-SK09
Weight: 0.06kg
Pack Dim: 140.00mm x 110.00mm x 27.00mm
UPC: 6009515877590

Price:

R 5.52

Ex VAT: R 4.80

Available Options

Stockist

Tork Craft Bearing Cover & Baffle (30/31/32/36) Service Kit (TCAG0230-SK09)

At a Glance: Bearing cover and baffle component kit (parts 30, 31, 32 & 36) for the Tork Craft TCAG0230 angle grinder

Inside a grinder, bearings don’t fail only from load — they fail from dust, heat and contamination sneaking in over time. Covers and baffles play an important role by shielding sensitive areas and guiding internal airflow and debris away from critical components. If these parts are cracked, missing or no longer seating correctly, your grinder can run hotter and wear out faster. The Tork Craft TCAG0230-SK09 Bearing Cover & Baffle Service Kit replaces the components referenced as parts 30, 31, 32 and 36, helping restore proper protection and internal control so your TCAG0230 stays smoother for longer.

Small protection parts that make a big reliability difference

Designed for the Tork Craft TCAG0230 platform, this kit is ideal during gearbox or motor servicing, after accidental damage, or whenever covers/baffles are worn or distorted. Fit the correct parts cleanly and ensure everything seats flat to support long bearing life and consistent performance.

Extra Information

Compatibility: Intended for the Tork Craft TCAG0230 angle grinder series.
Clean out carbon dust and old grease before reassembly to prevent contamination being trapped inside.
While open, inspect bearings, seals and related components for wear and replace as needed for best results.

Pro Tip

When installing covers and baffles, ensure the seating surfaces are clean and the parts sit perfectly flat. Spin the assembly by hand before final closure — any rubbing or tight spot is a sign something is misaligned.

Features

Protective-component service kit: Replaces bearing cover and baffle components used in the TCAG0230 assembly.
Parts reference match: Covers parts 30, 31, 32 and 36 as per the service diagram references.
Helps reduce contamination: Supports cleaner bearing areas by improving internal shielding and separation.
Model-specific compatibility: Intended for use with the Tork Craft TCAG0230 angle grinder.

Benefits

Extend bearing life: Better shielding can reduce dust ingress and premature wear.
More consistent running: Properly seated covers/baffles help prevent rubbing, vibration and heat build-up.
Smarter servicing: Perfect when rebuilding—replacing worn covers avoids repeat strip-downs later.

Safety

Wear eye protection and a dust mask when working with internal debris and carbon dust.
Disconnect power before opening the tool or fitting any spare parts.
Keep all covers and protective parts fitted correctly — missing components can lead to overheating and premature failure.
After reassembly, confirm the guard is correctly fitted and the spindle rotates freely before use.
Perform a no-load test run in a safe area and stop immediately if you hear rubbing, rattling or excessive vibration.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAG0230-SK09
Product Type	Spare Part Service Kit
Component Group	Bearing Cover & Baffle
Parts Reference	30, 31, 32 & 36
Compatible Tool Model	TCAG0230