Flange Nut Back & Front ( 1/2) Service Kit

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: In Stock
Model: TCAG0230-SK01
Weight: 0.09kg
Pack Dim: 120.00mm x 80.00mm x 10.00mm
UPC: 6009515877514

Price:

R 59.34

Ex VAT: R 51.60

Available Options

Stockist

Tork Craft Flange Nut Back & Front (1/2) Service Kit (TCAG0230-SK01)

At a Glance: Back and front flange nut set (parts 1 & 2) for secure disc mounting on the Tork Craft TCAG0230 angle grinder

The flange nuts are the “quiet security guards” of an angle grinder — they centre the disc, clamp it correctly, and keep everything stable at high speed. If your flange nuts are worn, rounded, bent, or no longer tighten smoothly, you risk poor disc alignment, vibration, and unsafe clamping. The Tork Craft TCAG0230-SK01 Flange Nut Back & Front Service Kit replaces the components referenced as parts 1 and 2, restoring proper disc retention so you can change accessories confidently and get back to clean, controlled cutting and grinding.

Correct clamping and centring for safer, smoother grinding

Designed for the Tork Craft TCAG0230 platform, this replacement flange nut set is ideal when the original nuts are damaged, seized, or chewed up from incorrect tools. Fit the correct back and front flange nuts, ensure the disc seats flat, and you’ll immediately feel the difference in stability and control.

Extra Information

Compatibility: Intended for the Tork Craft TCAG0230 angle grinder series.
Always ensure the disc is seated correctly and the correct flange face is used for the accessory type (cutting vs grinding discs may differ).
If the spindle thread is damaged or the flange nut continually loosens, inspect the spindle and related parts before further use.

Pro Tip

Tighten the flange nut firmly, but don’t over-tighten. Over-tightening can warp discs and make the next change a battle. Use the correct two-pin wrench and only engage the spindle lock once the grinder has fully stopped.

Features

Complete flange nut set: Includes the back and front flange nut components used to retain the disc/accessory.
Parts reference match: Covers parts 1 and 2 as per the service diagram reference.
Improves disc seating: Helps ensure the disc clamps flat and runs true when fitted correctly.
Model-specific compatibility: Intended for use with the Tork Craft TCAG0230 angle grinder.

Benefits

Safer disc retention: Restores secure clamping to reduce the risk of slipping or uneven seating.
Reduced vibration: Proper seating and centring can improve smoothness and control during use.
Faster accessory changes: Clean, undamaged nuts tighten and loosen more predictably.

Safety

Wear eye, ear and dust protection when operating an angle grinder.
Disconnect power before changing discs or fitting any spare parts.
Only press the spindle lock when the grinder is fully stopped.
Ensure the guard is correctly fitted and the disc is seated flat before switching on.
Use only rated discs suitable for the grinder and never exceed the disc’s maximum RPM.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAG0230-SK01
Product Type	Spare Part Service Kit
Component Group	Flange Nut Back & Front
Parts Reference	1 & 2
Compatible Tool Model	TCAG0230