Housing Kit Compl. (37/38/45/50/56/57) Service Kit

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 15
Model: TCAG0115-SK11
Weight: 0.22kg
Pack Dim: 200.00mm x 78.00mm x 78.00mm
UPC: 6009515877446

Price:

R 136.62

Ex VAT: R 118.80

Available Options

Stockist

Tork Craft Housing Kit Compl. (37/38/45/50/56/57) Service Kit (TCAG0115-SK11)

At a Glance: Complete housing component kit (parts 37, 38, 45, 50, 56 & 57) for the Tork Craft TCAG0115 angle grinder

Your grinder’s housing does more than “look pretty” — it’s the structural backbone that keeps the motor aligned, protects wiring, supports switch components, and gives you a solid, safe grip. If the casing is cracked, threads are stripped, screw posts are broken, or the housing no longer closes properly after a service, the whole tool can feel loose, noisy, and unsafe. The Tork Craft TCAG0115-SK11 Housing Kit Complete replaces the housing-related components referenced as parts 37, 38, 45, 50, 56 and 57, helping you restore correct fitment, protection, and control on your TCAG0115.

A fresh “shell” for a tighter, safer rebuild

Designed for the Tork Craft TCAG0115 platform, this kit is ideal after impact damage, workshop rebuilds, or when internal repairs require replacing worn or damaged housing sections. Fit the correct housing parts, route wiring neatly, and bring the grinder back to a solid, confidence-inspiring feel.

Extra Information

Compatibility: Intended for the Tork Craft TCAG0115 angle grinder series.
During installation, confirm that wiring is routed correctly and not pinched between housing halves.
If screws no longer hold firmly, inspect screw threads and matching inserts/posts—use the correct fasteners and avoid over-tightening.
Best practice: Inspect the cord entry/strain relief area and switch seating while the housing is open.

Pro Tip

Before closing the new housing, do a quick “dry fit”: place the switch and wiring in position and check that nothing sits proud. Tighten screws evenly (alternate sides) to avoid twisting the housing, then do a short no-load test run to confirm everything feels solid and normal.

Features

Housing repair kit: Replaces the key outer housing components used in the TCAG0115 assembly.
Parts reference match: Covers parts 37, 38, 45, 50, 56 and 57 as per the service diagram references.
Restores secure fitment: Helps correct loose closures, broken screw posts, and misalignment caused by damaged housings.
Model-specific compatibility: Intended for use with the Tork Craft TCAG0115 angle grinder.

Benefits

Safer handling: A solid housing helps you maintain control and reduces the risk of exposed wiring or loose components.
Cleaner, more reliable rebuild: Fresh housings improve component seating and reduce vibration from movement inside the tool.
Extend tool life: Replacing damaged casings protects motor parts and wiring from dust, knocks and strain.

Safety

Wear eye, ear and dust protection when operating an angle grinder.
Disconnect power before opening the tool or fitting any spare parts.
Ensure all internal wiring is correctly routed and insulated—pinched wires can cause electric shock or failure.
After reassembly, confirm the guard is correctly fitted and the spindle rotates freely before use.
Perform a no-load test run in a safe area after the repair and stop immediately if you smell burning, hear rubbing, or feel excessive vibration.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAG0115-SK11
Product Type	Spare Part Service Kit
Component Group	Housing Kit Complete
Parts Reference	37, 38, 45, 50, 56 & 57
Compatible Tool Model	TCAG0115