Gear & Spindle Compl. (6-14/16/23) Service Kit

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 72
Model: TCAG0115-SK03
Weight: 0.27kg
Pack Dim: 105.00mm x 85.00mm x 32.00mm
UPC: 6009515877361

Price:

R 261.51

Ex VAT: R 227.40

Available Options

Stockist

Tork Craft Gear & Spindle Compl. (6-14/16/23) Service Kit (TCAG0115-SK03)

At a Glance: Complete gear & spindle assembly kit (items 6–14, 16 & 23) for the TCAG0115 115mm angle grinder

When an angle grinder starts sounding rough, losing power under load, or developing excessive play at the spindle, the culprit is often hiding in the gearbox. The Tork Craft TCAG0115-SK03 Gear & Spindle Complete Service Kit is a purpose-made replacement assembly designed to bring the drive train back to proper working order. It replaces the key internal gear and spindle components (referenced as items 6–14, 16 and 23 in the parts diagram), helping restore smooth rotation, correct engagement, and dependable cutting/grinding performance.

Genuine service-kit assembly that renews the gearbox heart of your TCAG0115

Built for compatibility and fitment on the Tork Craft TCAG0115 115mm angle grinder, this kit is ideal for workshop repairs where reliability matters. Replace worn or damaged internal drivetrain parts, re-grease correctly, and get your grinder back in action with confidence.

Extra Information

Compatibility: Intended for the Tork Craft TCAG0115 115mm angle grinder (900W class).
Installation note: Gearbox repairs typically require correct grease application and careful reassembly—use an experienced technician where possible.
Best practice: Inspect related wear items (bearings, seals, circlips, spindle lock mechanism) during the rebuild and replace if needed.

Pro Tip

Before stripping the gearbox, take a few quick photos of the internal stack-up and spacer orientation. On reassembly, apply the correct gearbox grease (not general-purpose grease), spin by hand to confirm smooth mesh, then run the tool no-load for 30–60 seconds before putting it back to work.

Features

Complete drivetrain kit: Covers the Gear & Spindle “complete” component group (items 6–14, 16 & 23).
Model-specific compatibility: Designed for the Tork Craft TCAG0115 115mm angle grinder platform.
Restores proper engagement: Replaces worn gearbox/spindle components to bring back smooth transfer of power.
Workshop-friendly repair solution: Ideal for repairs where replacing single sub-parts is no longer practical.

Benefits

Bring your grinder back to life: Helps eliminate rough running, excessive play and drivetrain slippage caused by worn internals.
Protects the rest of the tool: Fresh drivetrain components can reduce shock loads that accelerate bearing and gear wear.
Cost-effective repair: Extends the usable life of your grinder without replacing the full machine.

Safety

Wear eye, ear and dust protection when operating an angle grinder.
Disconnect power before opening the gearbox or fitting any spare parts.
After reassembly, confirm the guard is correctly fitted and the spindle rotates freely before use.
Use only rated discs for the grinder and never exceed the disc’s maximum RPM.
Perform a no-load test run in a safe area after the repair to check for abnormal noise or vibration.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAG0115-SK03
Product Type	Spare Part Service Kit
Component Group	Gear & Spindle Complete
Parts Reference	Items 6–14, 16 & 23
Compatible Tool Model	TCAG0115
Kit UPC	6009515877361