Rot/hamer 20v Repl. Motor Support & Screws (50/51/52/53) S/kit

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 24
Model: TC20190-SK02
Weight: 0.05kg
Pack Dim: 120.00mm x 80.00mm x 32.00mm
UPC: 6009515872502

Price:

R 52.11

Ex VAT: R 45.31

Available Options

Stockist

Tork Craft Rotary Hammer 20V Replacement Motor Support & Screws (50/51/52/53) Service Kit (TC20190-SK02)

At a Glance: Motor support bracket and screw kit for the TC20190 RH500 20V SDS-Plus rotary hammer

The motor in your Tork Craft RH500 20V rotary hammer does serious work every time you drill or chisel into concrete and masonry. If the motor support or its screws are damaged, stripped or missing, the whole drive assembly can shift, causing vibration, noise and premature wear. The TC20190-SK02 Rot/hamer 20V Replacement Motor Support & Screws (50/51/52/53) Service Kit gives you a genuine Tork Craft support bracket and matching fasteners so you can secure the motor properly again and keep the SDS-Plus hammer running true.

Motor support and screw service kit – items 50, 51, 52 and 53 for TC20190 RH500 20V SDS-Plus rotary hammer

This kit is designed for the Tork Craft TC20190 Rotary Hammer RH500 20V SDS-Plus 0–1500 rpm 5500 bpm 4 function bare tool. It typically includes the motor support component and the specific screws listed as items 50, 51, 52 and 53 on the exploded diagram. Replacing these parts together restores the correct clamping and alignment of the motor within the housing, helping to protect gears, bearings and the hammer mechanism during demanding drilling and chiselling work.

Extra Information

These spare parts are for the Tork Craft TC20190 Rotary Hammer RH500 20V SDS-Plus 0–1500 rpm 5500 bpm 4 function bare tool – always check the model number on your machine.
Ideal when the motor feels loose in the housing, screws have stripped or gone missing, or the original support has cracked.
Use together with TC20190-SK01 (motor & gear kit) if you are carrying out a more complete drive train overhaul.
Refer to the official TC20190 exploded diagram to identify items 50, 51, 52 and 53 before disassembly.
UPC / barcode: 6009515872502 – useful for stock control, labels and POS scanning systems.

Pro Tip

When fitting the new motor support and screws, clean any dust or old thread-lock from the mounting points first. A clean surface and correctly tightened screws help prevent the support from loosening again under vibration.

Features

Genuine Tork Craft spare kit – Factory-spec motor support and mounting screws for the TC20190 20V rotary hammer.
Covers support bracket and fasteners – Includes components corresponding to items 50, 51, 52 and 53 on the parts list.
Designed for RH500 20V SDS-Plus – Correct shape, hole positions and screw sizes to suit the original motor and housing.
Secure motor retention – Helps hold the motor firmly in place to reduce movement under load.
Service-friendly pack – Supplied as a single kit for quick replacement of worn, damaged or missing supports and screws.

Benefits

Reduce vibration and noise: A properly supported motor runs smoother and feels more controlled in the hand.
Protect gears and bearings: Correct alignment helps prevent extra stress and premature wear in the drive train.
Extend tool lifespan: Replacing small but critical support parts can add years of service to your rotary hammer.
Restore factory feel: Fresh mounting hardware brings the tool back to the solid, tight feel it had when new.
Save time on repairs: All required support and screw items are grouped in one genuine Tork Craft kit.

Safety

Remove the 20 V battery pack from the rotary hammer before opening the housing or working on internal parts.
Allow the tool to cool before disassembly if it has been in recent use.
Work on a clean, stable surface and keep screws and small parts organised as you remove and refit components.
After tightening the new screws, check that the motor sits firmly with no movement before refitting covers and the battery.
If you are uncertain about any step in the repair, consult a qualified technician or an authorised Tork Craft service centre.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TC20190-SK02
Product Type	Rotary Hammer Motor Support & Screws Service Kit
Compatible Tool Model	TC20190 Rotary Hammer RH500 20V SDS-Plus 0–1500 rpm 5500 bpm 4 function bare tool
Key Components	Motor support and mounting screws (items 50, 51, 52, 53)
System Voltage (Tool)	20 V cordless platform
Typical Application	Replacement of damaged, loose or missing motor support and screws
Pack Size	1 × motor support & screws service kit