Rot/hamer 20v Repl. Motor & Gear (54/55) S/kit

Extra Information

• These spare parts are for the Tork Craft TC20190 Rotary Hammer RH500 20V SDS-Plus 0–1500 rpm 5500 bpm 4 function bare tool – confirm the model number on your machine before ordering.
• Recommended when you notice loss of power, burnt smells from the motor area, excessive sparking, or rough, grinding noises from the drive train.
• Use the TC20190 exploded diagram to identify items 54 and 55 and plan your strip-down sequence before disassembling the tool.
• Best installed on a clean workbench with all screws and small parts laid out in order to make re-assembly straightforward.
• Approximate pack dimensions and weight can be captured separately in your product admin console for shipping and logistics fields – they are not listed in the specifications table.

Features

• Genuine Tork Craft spare kit – Factory-specified replacement motor and gear set for the TC20190 20V rotary hammer.
• Covers key drive components (54/55) – Includes the main motor and associated gear components as indicated on the parts list.
• Designed for RH500 20V SDS-Plus – Matches the original TC20190 Rotary Hammer Rh500 20V SDS-Plus 0–1500 rpm 5500 bpm 4 function bare tool.
• Pre-matched components – Motor and gear supplied to work together for correct alignment and load-sharing.
• Service-kit packaging – Supplied as a single kit to simplify ordering and maintenance planning.

Benefits

• Restore drilling and chiselling power: Fresh motor and gears help your rotary hammer maintain speed and impact energy in hard materials.
• Smooth out noise and vibration: New drive components can noticeably improve running feel and reduce harsh mechanical noises.
• Extend tool lifespan: Renew the high-stress drive parts instead of scrapping a cordless hammer with otherwise sound components.
• Protect other internals: Correctly meshing gears reduce unnecessary stress on bearings, seals and the hammer mechanism.
• Save time on parts selection: A single genuine kit avoids guesswork when ordering separate motor and gear parts.

Safety

• Always remove the 20 V battery pack from the rotary hammer before opening the housing or working on internal components.
• Allow the tool to cool down fully before starting any repair work if it has recently been in use.
• Work on a stable, clean surface and keep small screws, washers and clips organised so nothing is lost during re-assembly.
• After fitting the new motor and gear, turn the mechanism by hand first to check for smooth operation before refitting covers.
• Test the hammer at no-load initially, listening for unusual noises or vibration, and discontinue use if anything abnormal is detected.

Specifications