Annular Hole Cutter Tct 28 X 35mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 35
Model: TCAC028-3
Weight: 0.13kg
Pack Dim: 125.00mm x 50.00mm x 45.00mm
UPC: 6009515895167

Price:

R 828.68

Ex VAT: R 720.59

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 28 × 35 mm, 19.05 mm (3/4") Weldon

Size: 28 mm x 35 mm [3/4" Weldon Shank]

The 28 mm diameter TCT annular cutter from Tork Craft is engineered for high-efficiency hole making in steel and cast-iron. With a 35 mm cutting depth and a rugged 19.05 mm (3/4″) Weldon shank, this tool delivers fast, clean broaches with minimal burrs and reduced feed pressure — ideal for workshop or site use.

Extra Information

Designed for use with a magnetic-base drill or compatible drill press arbor with Weldon shank.
A pilot pin (sold separately) is required to centre the cutter and eject the slug; check compatibility with your arbor.
On stainless or harder materials, use suitable cutting fluid, steady feed and periodic chip clearing to protect the tool and maintain finish.

Pro Tip

Ensure the magnet base sits flat and clean on the workpiece. Begin at lower RPM until the cutter seats, then increase feed once you get consistent curling chips. If you notice increased vibration or are drilling stacked materials, pause to clear chips and re-lubricate to maintain finish and prolong cutter life.

Features

28 mm diameter — for larger bolt holes, clearance and pipe penetrations.
35 mm cutting depth — suitable for standard plate thickness and stacked materials.
19.05 mm (3/4") Weldon shank — secure two-flat drive system for magnetic drills.
TCT teeth — long-life tungsten-carbide tips for demanding materials like cast-iron and heavy-duty steels.
Thin-wall, multi-flute body — optimized for quick penetration and effective chip removal.

Benefits

Faster drilling: removes only a peripheral ring of material, not the full core like a twist bit.
Cleaner holes: lower burr formation means less finishing work.
Reduced machine load: lower feed force means better performance on overhead or vertical applications.
Longer tool life: tighter tolerance carbide tips stand up to hard materials and high use.

Safety

Wear eye, ear and gloves protection; apply cutting fluid to manage heat and chip flow.
Ensure the magnet base or work clamp is firmly secured and the workpiece stable before drilling; use a tether when working overhead or on angled surfaces.
Do not use hammer/impact mode; feed steadily and allow the slug to eject naturally—if feed slows, stop and clear chips immediately.
Disconnect power or disable magnet before changing cutters, pilot pins or shanks.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAC028-3
Product Type	Annular hole cutter (TCT)
Diameter	28 mm
Cutting Depth	35 mm
Shank	19.05 mm (3/4") Weldon, two-flat drive
Tip Material	Tungsten-carbide-tipped
Body	Alloy steel, thin-wall design
Suitable Materials	Mild & structural steel, stainless (with coolant), cast-iron
Recommended Machine	Magnetic-base drill / drill-press with Weldon shank arbor
Pilot Pin	Required for centring & slug ejection
Pack Quantity	1