Annular Hole Cutter Tct 24 X 55mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 54
Model: TCAC024-4
Weight: 0.12kg
Pack Dim: 120.00mm x 38.00mm x 35.00mm
UPC: 6009515895136

Price:

R 879.76

Ex VAT: R 765.01

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 24 × 55 mm, 19.05 mm (3/4") Weldon

Size: 24 mm x 55 mm [3/4" Weldon Shank]

This 24 mm TCT annular cutter is designed for fast, accurate holes through structural steel, plate and cast-iron. The tungsten-carbide-tipped teeth and thin-wall construction deliver high performance while the 19.05 mm (3/4") Weldon shank ensures firm drive engagement in magnetic drills and compatible arbors.

Extra Information

Use with magnetic-base drill or compatible drill-press arbor with Weldon shank mounting.
A pilot pin (sold separately) is required for centring the cutter and ejecting the slug.
For stainless steel or harder material, apply adequate cutting fluid and maintain steady feed to protect carbide tips and prevent chip clogging.

Pro Tip

Mount the cutter on a clean, flat surface; ensure magnet is firmly engaged; begin at low RPM and increase feed only when chips form in consistent streams. Clear chips and re-lubricate during deep cuts to preserve finish and cutter life.

Features

24 mm diameter — ideal for larger anchor bolts, bushings and conduit holes.
55 mm cutting depth — effective for standard plate thicknesses and thin structural steels.
19.05 mm (3/4") Weldon shank — reliable two-flat drive for mag-drills.
TCT (tungsten-carbide-tipped) teeth — designed for heavy duty cuts through steel and cast-iron with extended tool life.
Thin-wall, multi-flute body — promotes rapid penetration and efficient chip removal.

Benefits

High productivity: removes only a thin ring of material so faster cuts and less operator fatigue.
Cleaner holes: fewer burrs and smoother finishes reduce post-drilling cleanup.
Extended tool life: carbide tips maintain cut quality across many holes.
Lower feed force: ideal for vertical or overhead operations where feed effort is crucial.

Safety

Wear eye, ear and gloves protection; use cutting fluid to control heat and improve chip flow.
Ensure the magnet is securely attached and the workpiece is stable before drilling; in overhead or elevated situations use additional anchoring.
Do not use hammer action; feed steadily and allow the slug to eject—stop and clear chips if feed slows or juddering occurs.
Disconnect power or disable magnet before changing cutters, shanks or pilot pins.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAC024-4
Product Type	Annular hole cutter (TCT)
Diameter	24 mm
Cutting Depth	55 mm
Shank	19.05 mm (3/4") Weldon, two-flat
Tip Material	Tungsten-carbide-tipped
Body	Alloy steel, thin-wall
Suitable Materials	Mild & structural steel, stainless (with coolant), cast-iron
Recommended Machine	Magnetic-base drill / drill-press with Weldon shank arbor
Pilot Pin	Required for centring & slug ejection
Pack Quantity	1