Annular Hole Cutter Tct 20 X 35mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 37
Model: TCAC020-3
Weight: 0.09kg
Pack Dim: 120.00mm x 38.00mm x 35.00mm
UPC: 6009515895082

Price:

R 777.61

Ex VAT: R 676.18

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 20 × 35 mm, 19.05 mm (3/4") Weldon

Size: 20 mm x 35 mm [3/4" Weldon Shank]

This 20 mm TCT annular cutter brings high-efficiency broaching through steel, structural plate and cast iron. With a 35 mm cutting depth, tungsten-carbide-tipped teeth and a rugged 19.05 mm (3/4″) Weldon shank, it’s designed for use in magnetic-base drills and heavy duty production settings where accuracy, speed and tool-life are essential.

Extra Information

Designed for magnetic-base drills or compatible drill-press setups using a 19.05 mm (3/4″) Weldon shank arbor.
A pilot pin (sold separately) is required for centring the cutter and ejecting the slug — ensure you use the correct size for best results.
For stainless or harder materials, apply cutting fluid and maintain steady feed to preserve carbide life and prevent chip clogging.

Pro Tip

Clean the base of the magnet on the workpiece, clamp securely, start at low RPM then increase feed until continuous, consistent chips form. Periodically clear chips and re-lubricate during deep cuts to avoid heat build-up and improve finish.

Features

20 mm diameter — creates accurate holes for anchor bolts, flanges and conduit pass-throughs.
35 mm cutting depth — accommodates common plate thicknesses and stacked material.
19.05 mm (3/4") Weldon shank — two-flat drive ensures secure clamp in most mag-drills.
TCT (tungsten-carbide-tipped) teeth — built for long life when cutting structural steel and cast iron.
Thin-wall body with multi-flute design — fast penetration, efficient chip removal and less load on machine.

Benefits

Increased productivity: only the ring of material is removed (not the full diameter), meaning faster cuts and less effort.
Cleaner finish: reduced burrs and smoother hole edges means less rework.
Extended tool life: carbide tips maintain sharpness over many holes.
Lower operator fatigue: less feed pressure required — especially helpful on overhead or vertical work.

Safety

Wear eye, ear and gloves protection; apply cutting fluid to control heat and chip-ejection.
Ensure magnet is firmly attached and workpiece is stable before drilling; when working overhead or on unstable surfaces, use additional tethering.
Do not use hammer action; feed steadily and ensure slug is properly ejected to prevent jamming.
Disconnect power or disable magnet before changing cutters, shanks or pilot pins.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAC020-3
Product Type	Annular hole cutter (TCT)
Diameter	20 mm
Cutting Depth	35 mm
Shank	19.05 mm (3/4") Weldon, two-flat
Tip Material	Tungsten-carbide-tipped
Suitable Materials	Mild & structural steel, stainless (with coolant), cast iron
Recommended Machine	Magnetic-base drill / drill press with Weldon shank arbor
Pilot Pin	Required for centring & slug ejection
Pack Quantity	1