Annular Hole Cutter Tct 18 X 55mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 56
Model: TCAC018-4
Weight: 0.09kg
Pack Dim: 120.00mm x 38.00mm x 35.00mm
UPC: 6009515895075

Price:

R 879.76

Ex VAT: R 765.01

Available Options

Stockist

Tork Craft Annular Hole Cutter — TCT 18 × 55 mm, 19.05 mm (3/4") Weldon

Size: 18 mm x 55 mm [3/4" Weldon Shank]

This 18 mm TCT annular cutter is engineered for deep, precise holes up to 55 mm in structural steel and plate. Tungsten-carbide tips keep cutting sharp and fast, while the thin-wall body removes only a ring of material for lower feed force, cooler operation and a cleaner finish. Ideal for site work with mag drills where repeatable accuracy and productivity matter.

Extra Information

Use in a magnetic-base drill or drill press with suitable arbor.
Requires a pilot pin for centering and slug ejection (sold separately).
Apply cutting fluid and steady feed, particularly on stainless or harder grades.

Features

18 mm diameter — accurate bolt and conduit hole sizing.
55 mm cutting depth — handles thicker plate and stacked material.
19.05 mm (3/4") Weldon shank — two-flat drive fits most magnetic drills.
TCT teeth — long life in abrasive or hard materials, including stainless.
Thin-wall, multi-flute geometry for fast penetration and efficient chip evacuation.

Benefits

High productivity — removes less material than twist drills for quicker holes.
Cleaner edges with reduced burrs, minimizing rework.
Extended tool life from wear-resistant carbide tips.
Lower effort — reduced feed pressure, especially on vertical/overhead jobs.

Safety

Wear eye, ear and gloves protection; use cutting fluid to control heat.
Verify magnet hold before drilling; tether the drill when working at height.
Do not use hammer action; keep a straight, steady feed and allow the slug to eject.
Disconnect power before changing cutters or pilot pins.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAC018-4
Product Type	Annular hole cutter (TCT)
Diameter	18 mm
Cutting Depth	55 mm
Shank	19.05 mm (3/4") Weldon, two-flat
Tip Material	Tungsten-carbide-tipped
Suitable Materials	Mild & structural steel, stainless (with coolant), cast iron
Recommended Machine	Magnetic-base drill / drill press with suitable arbor
Pilot Pin	Required for centering & slug ejection (size per arbor)
Pack Quantity	1