Annular Hole Cutter Hss 31 X 55mm Weld Shank 19.05mm

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: In Stock
Model: TCAC031-2
Weight: 0.18kg
Pack Dim: 50.00mm x 40.00mm x 102.00mm
UPC: 6009515814779

Price:

R 740.95

Ex VAT: R 644.30

Available Options

Stockist

Tork Craft Annular Hole Cutter — HSS 31 × 55 mm, 19.05 mm (3/4") Weldon

Size: 31 mm x 55 mm [3/4" Weldon Shank]

The 31 mm HSS annular cutter from Tork Craft delivers high-performance broaching for steel and cast-iron. With a 55 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, this tool is built to produce clean, burr-reduced holes efficiently while minimizing feed pressure and maximising machine life.

Extra Information

Designed for use with magnetic-base drills or drill presses fitted with a 19.05 mm (3/4″) Weldon shank arbor.
A pilot pin (sold separately) is required for centring the cutter and ejecting the slug—confirm compatibility with your arbor.
When drilling stainless steel or harder materials, apply proper cutting fluid and maintain a steady feed to protect the cutter and ensure efficient chip evacuation.

Pro Tip

Ensure the magnet or base of the drill sits flat and clean on the workpiece. Start at low RPM, then increase feed once continuous chips form. On deep cuts, pause to clear chips and re-lubricate to avoid overheating and extend cutter life.

Features

31 mm diameter — suitable for larger bolts, sleeves and clearance holes.
55 mm cutting depth — handles substantial plate thicknesses and multi-stack setups.
19.05 mm (3/4") Weldon shank — secure two-flat drive for use in magnetic drills and arbors.
HSS (high-speed steel) body — durable construction for metal drilling applications.
Thin-wall, multi-flute geometry — faster penetration, efficient chip removal and reduced machine load.

Benefits

Faster drilling: removes only the ring of material rather than full core, reducing time per hole.
Cleaner finish: less burr-formation means less cleanup and better fit for bolt/sleeve applications.
Reduced effort: lower feed pressure required, especially helpful on vertical or overhead drilling.
Versatile tool life: HSS material and Weldon shank design give longevity and reliable performance for industrial use.

Safety

Wear eye, ear and gloves protection; use appropriate cutting fluid to control heat and assist chip removal.
Ensure the magnet or base is firmly clamped to a flat work surface; confirm workpiece stability and use a tether if drilling overhead or on angled surfaces.
Do not use hammer or impact mode; feed steadily and allow the slug to eject naturally. If feed slows or chatter begins, stop and clear chips immediately.
Disconnect power or disable magnet before changing cutters, pilot pins or shanks.

Description	Specification
Packaging Type	Hanging plastic tube
Package Dimensions	118(L)mm x Ø45mm
Package Weight	190g
Product Dimensions	87(L)mm x Ø31mm
Product Weight	169g
Material	HSS
Finish	Polished
Size	Ø31mm
Cutting Depth	55mm
Shank	3/4" (19.05mm) Weldon shank compatible with most magnetic base drills.
Recommended accessories/tools	Mag base drill machines (TCMD00__)
	TCAC0004 for 30mm long cutters
	TCAC0005 for 55mm long cutters
Warranty	Consumable products excluded from warranty unless confirmed production error.
Content	1 x Annular hole cutter HSS