Stock: 29
Model: TCAC0001
UPC: 6009515814908
Morse Taper to Weldon adaptor
MT3 to Weldon Adaptor
Morse Taper 3 adaptor that accept cutters with a 3/4 inch Weldon shank....
R 1,168.52
Ex VAT:R 1,016.10
Stock: 18
Model: TCAC0002
UPC: 6009515819873
Morse Taper to Weldon adaptor
MT2 to Weldon Adaptor
Morse Taper 2 adaptor that accept cutters with a 3/4 inch Weldon shank....
R 1,333.43
Ex VAT:R 1,159.50
Stock: 1739
Model: TCAC0004
UPC: 6009515814915
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
30 mm Annular Cutters
Pilot pin with length of 79 mm specifically for annular cutters (broach
cutters) with a cutting length of 30 mm.
....
R 34.06
Ex VAT:R 29.62
Stock: 1348
Model: TCAC0005
UPC: 6009515814922
Annular Cutter Pilot Pin
6.3 mm Pilot Pin for
55 mm Annular Cutters
Pilot pin with length of 102 mm specifically for annular cutters (broach
cutters) with a cutting length of 55 mm.
....
R 44.03
Ex VAT:R 38.29
Stock: 19
Model: TCAC010
UPC: 6009515820732
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 437.35
Ex VAT:R 380.30
Stock: 462
Model: TCAC014-2
UPC: 6009515814465
Annular Cutters 55mm long
Annular Cutter: &O/; 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 453.62
Ex VAT:R 394.45
Stock: 189
Model: TCAC016-2
UPC: 6009515814519
Annular Cutters 55mm long
Annular Cutter: &O/; 16
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 515.49
Ex VAT:R 448.25
Stock: 400
Model: TCAC018-1
UPC: 6009515814540
Annular Cutters 30mm
Annular Cutter: &O/; 18
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 411.01
Ex VAT:R 357.40
Stock: 62
Model: TCAC019-1
UPC: 6009515814564
Annular Cutters 30mm
Annular Cutter: &O/; 19
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 419.23
Ex VAT:R 364.55
Stock: 74
Model: TCAC024-2
UPC: 6009515814656
Annular Cutters 55mm long
Annular Cutter: &O/; 24
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 749.17
Ex VAT:R 651.45
Stock: 52
Model: TCAC027-2
UPC: 6009515814717
Annular Cutters 55mm long
Annular Cutter: &O/; 27
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 925.55
Ex VAT:R 804.83
Stock: 107
Model: TCAC028-1
UPC: 6009515814724
Annular Cutters 30mm
Annular Cutter: &O/; 28
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 584.20
Ex VAT:R 508.00
Stock: 174
Model: TCAC032-1
UPC: 6009515814786
Annular Cutters 30mm
Annular Cutter: &O/; 32
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 795.92
Ex VAT:R 692.10
Stock: 203
Model: TCAC032-2
UPC: 6009515814793
Annular Cutters 55mm long
Annular Cutter: &O/; 32
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 840.31
Ex VAT:R 730.70
Stock: 67
Model: TCAC033-2
UPC: 6009515814816
Annular Cutters 55mm long
Annular Cutter: &O/; 33
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 927.88
Ex VAT:R 806.85
Stock: 77
Model: TCAC035-1
UPC: 6009515814823
Annular Cutters 30mm
Annular Cutter: &O/; 35
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 845.42
Ex VAT:R 735.15
Stock: 54
Model: TCAC035-2
UPC: 6009515814830
Annular Cutters 55mm long
Annular Cutter: &O/; 35
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 1,098.37
Ex VAT:R 955.10
Stock: 93
Model: TCAC038-2
UPC: 6009515814878
Annular Cutters 55mm long
Annular Cutter: &O/; 38
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 1,397.57
Ex VAT:R 1,215.28
Stock: 77
Model: TCAC040-2
UPC: 6009515814892
Annular Cutters 55mm long
Annular Cutter: &O/; 40
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 1,373.27
Ex VAT:R 1,194.15
Stock: 34
Model: TCAC042-1
UPC: 6009515828400
Annular Cutters 30mm
Annular Cutter: &O/; 42
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 1,264.60
Ex VAT:R 1,099.65
Stock: 12
Model: TCAC045-1
UPC: 6009515828424
Annular Cutters 30mm
Annular Cutter: &O/; 45
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 1,340.27
Ex VAT:R 1,165.45
Stock: 6
Model: TCAC046-1
UPC: 6009515828431
Annular Cutters 30mm
Annular Cutter: &O/; 46
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 1,527.90
Ex VAT:R 1,328.61
Stock: 32
Model: TCAC050-2
UPC: 6009515818968
Annular Cutters 55mm long
Annular Cutter: &O/; 50
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 2,277.33
Ex VAT:R 1,980.29
Stock: 20
Model: TCAC055-1
UPC: 6009515865467
ANNULAR HOLE CUTTER HSS 55 X 30MM WELD SHANK 19.05MM....
R 1,923.15
Ex VAT:R 1,672.30
Stock: 26
Model: TCAC058-1
UPC: 6009515865481
ANNULAR HOLE CUTTER HSS 58 X 30MM WELD SHANK 19.05MM....
R 2,299.34
Ex VAT:R 1,999.43
Stock: 103
Model: TCAC018-4
UPC: 6009515895075
ANNULAR HOLE CUTTER TCT 18 X 55MM WELD SHANK 19.05MM....
R 879.76
Ex VAT:R 765.01
Stock: 26
Model: TCAC024-3
UPC: 6009515895129
ANNULAR HOLE CUTTER TCT 24 X 35MM WELD SHANK 19.05MM....
R 777.61
Ex VAT:R 676.18
Stock: 37
Model: TCAC028-3
UPC: 6009515895167
ANNULAR HOLE CUTTER TCT 28 X 35MM WELD SHANK 19.05MM....
R 828.68
Ex VAT:R 720.59
Stock: 10
Model: TCAC032-3
UPC: 6009515895204
ANNULAR HOLE CUTTER TCT 32 X 35MM WELD SHANK 19.05MM....
R 1,022.42
Ex VAT:R 889.06
Stock: 19
Model: TCAC064-1
UPC: 6009515894962
ANNULAR HOLE CUTTER HSS 64 X 30MM WELD SHANK 19.05MM....
R 2,603.16
Ex VAT:R 2,263.62
Stock: 15
Model: TCAC064-2
UPC: 6009515894979
ANNULAR HOLE CUTTER HSS 64 X 55MM WELD SHANK 19.05MM....
R 3,372.85
Ex VAT:R 2,932.91
Stock: 22
Model: TCAC075-4
UPC: 6009515895259
ANNULAR HOLE CUTTER TCT 75 X 55MM WELD SHANK 31.75MM....
R 3,202.88
Ex VAT:R 2,785.11
Stock: 23
Model: TCAC095-4
UPC: 6009515895334
ANNULAR HOLE CUTTER TCT 95 X 55MM WELD SHANK 31.75MM....
R 4,737.83
Ex VAT:R 4,119.85
Stock: 21
Model: TCAC102-3
UPC: 6009515895341
ANNULAR HOLE CUTTER TCT 102 X 30MM WELD SHANK 31.75MM....
R 5,806.05
Ex VAT:R 5,048.74
In Stock Soon
Stock: In Stock Soon
Model: TCAC0005-01
UPC: 6009515897802
PILOT PIN TCT CUTTER 12 - 17MM X 55MM 6.3 X 106MM BROACH CUTTERS....
R 109.31
Ex VAT:R 95.05
New Expected Date :
- 11/07/2025
Stock: 5
Model: TCAC006
UPC: 6009515820701
6mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 400.03
Ex VAT:R 347.85
Stock: 77
Model: TCAC011
UPC: 6009515820749
11mm HSS Drill bit - Weldon Shank
High Speed Steel drill bit with Weldon shank. Quality Tork Craft product.
What is a Weldon Shank?
The term comes from the Weldon Tool Company. The Weldon shank was the first straight shank with a locking drive flat....
R 394.34
Ex VAT:R 342.90
Stock: 83
Model: TCAC012-2
UPC: 6009515814434
Annular Cutters 55mm long
Annular Cutter: &O/; 12 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 481.71
Ex VAT:R 418.88
Stock: 166
Model: TCAC013-2
UPC: 6009515814472
Annular Cutters 55mm long
Annular Cutter: &O/; 13
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 481.71
Ex VAT:R 418.88
Stock: 601
Model: TCAC014-1
UPC: 6009515814458
Annular Cutters 30mm
Annular Cutter: &O/; 14
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 364.26
Ex VAT:R 316.75
Stock: 124
Model: TCAC015-1
UPC: 6009515814489
Annular Cutters 30mm
Annular Cutter: &O/; 15
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 345.58
Ex VAT:R 300.50
Stock: 143
Model: TCAC017-2
UPC: 6009515814533
Annular Cutters 55mm long
Annular Cutter: &O/; 17
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 507.27
Ex VAT:R 441.10
Stock: 180
Model: TCAC020-1
UPC: 6009515814588
Annular Cutters 30mm
Annular Cutter: &O/; 20
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 457.99
Ex VAT:R 398.25
Stock: 113
Model: TCAC021-1
UPC: 6009515814601
Annular Cutters 30mm
Annular Cutter: &O/; 21
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 460.52
Ex VAT:R 400.45
Stock: 120
Model: TCAC021-2
UPC: 6009515814618
Annular Cutters 55mm long
Annular Cutter: &O/; 21 mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 611.74
Ex VAT:R 531.95
Stock: 612
Model: TCAC022-2
UPC: 6009515814632
Annular Cutters 55mm long
Annular Cutter: &O/; 22
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 644.69
Ex VAT:R 560.60
Stock: 132
Model: TCAC023-1
UPC: 6009515817510
Annular Cutters 30mm
Annular Cutter: &O/; 23
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 507.50
Ex VAT:R 441.30
Stock: 87
Model: TCAC023-2
UPC: 6009515817527
Annular Cutters 55mm long
Annular Cutter: &O/; 23
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 685.98
Ex VAT:R 596.50
Stock: 189
Model: TCAC026-1
UPC: 6009515814687
Annular Cutters 30mm
Annular Cutter: &O/; 26
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist dril..
R 641.07
Ex VAT:R 557.45
Stock: 119
Model: TCAC026-2
UPC: 6009515814694
Annular Cutters 55mm long
Annular Cutter: &O/; 26
mm
One
way to avoid dimpling and deburring while making holes in tube and pipe is to use
annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone
resistance to overcome.
Using a twist drill to make holes in pipe or tubing can prompt concerns about
the hole roundness, location accuracy, hole finish, chip extraction, burrs, and
drilling duration.
The focal . of these concerns is the twist ..
R 804.20
Ex VAT:R 699.30