Elbow 16mm-1/2"m Pu Hose Fitting

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: In Stock
Model: SPL16-04
Weight: 0.06kg
Pack Dim: 63.00mm x 48.00mm x 28.00mm
UPC: 6009515907716

Price:

R 102.37

Ex VAT: R 89.02

Available Options

Stockist

AirCraft Elbow 16mm-1/2" M BSP PU Hose Fitting

At a Glance: 16mm push-in tube connection to 1/2" Male BSP thread in a compact 90° elbow.

When you’re moving more air with larger tubing, tidy routing and solid connections matter even more. The AirCraft Elbow 16mm-1/2" M BSP PU Hose Fitting connects 16mm pneumatic tubing to a 1/2" BSP female port using a quick push-in connection, creating a clean 90° turn right at the port. It’s ideal for higher-flow compressed-air plumbing on compressors, FRLs, regulators, manifolds and workshop air systems where straight fittings would force awkward bends, strain the tube, or clutter the installation.

Standout feauture or series/quality/range: AirCraft Push-In Pneumatic Fittings

Fast push-in pneumatic connections built for tidy routing, quick maintenance and reliable performance in workshop and industrial air systems.

Extra Information

Designed for 16mm OD PU or nylon pneumatic tubing. Use a clean, square-cut tube end for best sealing.
Thread check: This fitting is 1/2" Male BSP. Confirm your port thread type (BSP vs NPT) before fitting.
Use a suitable thread sealant (PTFE tape or pneumatic thread sealant) as required by your application and equipment guidelines.

Pro Tip

With 16mm tube, push in firmly until it bottoms out, then tug gently to confirm it’s locked—finish with a soapy-water leak test before full pressurisation.

Features

Push-in 16mm tube connection Tool-free tube installation and removal for quick servicing.
1/2" Male BSP thread Suits common BSP ports on air service units, manifolds and pneumatic equipment.
90° elbow design Routes tubing neatly around corners to reduce kinking and stress.
Compact body Helps keep installations tidy in cabinets, panels and tight spaces.

Benefits

Cleaner routing: Keeps 16mm tubing runs neat and reduces strain at the port connection.
Quicker maintenance: Push-in connection speeds up tube swaps and line changes.
Reduced leak potential: Correct tube insertion and proper thread sealing help minimise air loss.

Safety

Isolate and depressurise the air system before installing or removing pneumatic fittings.
Wear eye protection when working with compressed air and pressurised lines.
Do not over-tighten threaded connections—use correct tools and a suitable thread sealant to prevent damage and leaks.
After installation, leak-test the joint before returning equipment to service.
Use only within the rated limits of your pneumatic system and compatible tubing/materials.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SPL16-04
Product Type	Push-In Pneumatic Elbow Fitting
Tube Size	16mm (OD)
Thread Type	BSP
Thread Size	1/2" Male
Connection Angle	90° Elbow
Typical Use	Compressed air / pneumatic tubing lines (PU/Nylon)