Spare Nozzle Kit 2.0mm For H827

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG H827-3
Weight: 0.11kg
Pack Dim: 150.00mm x 90.00mm x 38.00mm
UPC: 6009515806170

Price:

R 259.90

Ex VAT: R 226.00

Available Options

Stockist

AirCraft Spare Nozzle Kit 2.0mm SG-H827-3 For H827

At a Glance: 2.0mm nozzle set for the H827—made for high-flow applications where you need to move more material fast (coating and setup dependent).

The AirCraft SG-H827-3 Spare Nozzle Kit 2.0mm is a replacement nozzle set for the AirCraft H827 spray gun. The nozzle kit is the precision trio that decides whether your finish looks professional or painful: the needle, fluid nozzle and air cap meter material and atomise it into a controlled fan. As these parts wear, get scratched, or collect stubborn residue, the gun starts misbehaving—spitting, poor atomisation, uneven fan edges and dripping from a needle that no longer seals cleanly. A 2.0mm setup is typically chosen when you want very high material flow for heavier coatings or faster coverage (application dependent). Fit a fresh nozzle set and your H827 can deliver stronger flow with better consistency and cleaner shut-off.

Maximum Flow, Restored Control: the SG-H827-3 2.0mm Nozzle Set

High-flow spraying only works when the needle/nozzle seal properly and the air cap atomises consistently. Match the Cat No. SG-H827-3 to ensure correct fitment for your AirCraft H827.

Extra Information

Compatibility: Spare nozzle kit for AirCraft H827 spray gun.
When to replace: Persistent spray issues after cleaning, or visible damage/wear on needle/nozzle/air cap.
Coating prep: Strain and mix coatings correctly—thicker materials may need correct thinning and filtration.
Adjust your setup: A 2.0mm nozzle can deliver a lot of material—fine-tune fluid and pressure to avoid runs.

Pro Tip

With a 2.0mm nozzle, start with lower fluid and slightly higher movement speed, then adjust. It’s easier to add flow than to fix runs after the fact.

Features

Complete 2.0mm nozzle kit Replaces the main wear parts that control flow and spray pattern.
Very high-flow nozzle size Suitable where greater material delivery is required (coating dependent).
Precision spray components Needle/nozzle fit supports clean shut-off and consistent atomisation.
Designed for H827 Model-specific spare nozzle kit for correct compatibility.

Benefits

Restores spray performance: Helps eliminate spitting, rough atomisation and unstable fan edges.
Better shut-off: Fresh needle/nozzle contact helps reduce dripping and leakage.
Faster coverage potential: Higher flow can help on larger surfaces and heavier coats (application dependent).
Cost-effective maintenance: Replace wear parts instead of replacing the entire spray gun.

Safety

Spray in a well-ventilated area and wear suitable respiratory protection.
Wear eye protection and gloves when handling coatings and cleaning solvents.
Disconnect the air supply and release pressure before changing needle/nozzle/air cap parts.
Keep solvents and coatings away from open flames and heat sources.
Dispose of cleaning waste responsibly according to local regulations.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG-H827-3
Product Type	Spare Nozzle Kit (Needle/Nozzle/Air Cap Set)
Nozzle Size	2.0mm
Compatible With	AirCraft H827 spray gun
Function	Controls coating flow, atomisation and spray pattern
Replacement Use	Direct replacement by part number
Typical Use	Very high-flow applications (coating and setup dependent)

Spray Gun Hvlp 1.4mm Nozzle 600cc Plastic Cup

AirCraft Spray Gun Hvlp 1.4mm Nozzle 600cc Plastic Cup At a Glance; HVLP gravity feed spray gun with 1.4mm nozzle and 600cc plastic cup for smooth, c..

R 454.83

Ex VAT:R 395.50