Plastic Cup For H2000 Spray Gun

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG H2000-8
Weight: 0.04kg
Pack Dim: 90.00mm x 63.00mm x 63.00mm
UPC: 6009515809485

Price:

R 147.20

Ex VAT: R 128.00

Available Options

Stockist

AirCraft Plastic Cup SG-H2000-8 For H2000 Spray Gun

At a Glance: Replacement plastic fluid cup with screw-on cap—keeps your AirCraft H2000 spray gun ready for clean, consistent spraying.

The AirCraft SG-H2000-8 Plastic Cup is a replacement fluid cup/reservoir for the AirCraft H2000 spray gun. The cup is where the mess begins and ends: it holds your coating, feeds the gun, and gets exposed to cleaning solvents, knocks, drops, and over-tightened lids. When the original cup becomes cracked, cloudy, or starts leaking at the threads, you’ll notice it immediately—drips, inconsistent feeding, and paint where it definitely shouldn’t be. Fit a fresh SG-H2000-8 cup and your setup goes back to tidy, reliable feeding—so you can focus on smooth coats instead of chasing leaks and blockages.

Fresh Cup, Better Flow: the SG-H2000-8 Replacement Reservoir

A clean, undamaged cup helps maintain steady fluid feed and reduces contamination from dried paint flakes. Match the Cat No. SG-H2000-8 to ensure correct fitment for the H2000 spray gun.

Extra Information

Compatibility: Spare plastic cup for the AirCraft H2000 spray gun.
Cleaning: Rinse promptly after use to prevent paint drying inside the cup and blocking feed.
Solvent caution: Some strong solvents can cloud or weaken plastic—use suitable cleaners where possible.
Check the connector: If leaks persist, inspect the cup inlet/connector and sealing surfaces on the gun.

Pro Tip

Keep a spare cup on hand for quick colour changes. Swap cups, flush the gun, and you’re back spraying faster—especially handy on multi-colour jobs.

Features

Replacement plastic fluid cup Restores the reservoir on the AirCraft H2000 spray gun.
Screw-on cap Helps reduce spills and keeps contents protected during use.
Lightweight design Comfortable to use and easy to clean between coats and colour changes.
Model-specific spare Part-number referenced cup for the AirCraft H2000.

Benefits

Stops leaks and drips: Replaces cracked or worn cups that seep at the threads or base.
Improves spray consistency: Reliable feeding supports smoother, more predictable spraying.
Cleaner working area: Less mess around the gun body and your bench.
Quick maintenance fix: Easy swap to keep your spray gun in service.

Safety

Use in a well-ventilated area and avoid breathing paint and solvent fumes.
Wear eye protection and suitable gloves when handling coatings and cleaning agents.
Keep solvents and paints away from open flames and heat sources.
Do not over-tighten the cup or cap—firm is enough to seal and helps prevent thread damage.
Dispose of leftover paint/solvent responsibly according to local regulations.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG-H2000-8
Product Type	Plastic Cup / Fluid Cup (Spray Gun Spare Part)
Compatible With	AirCraft H2000 spray gun
Material	Plastic (semi-transparent)
Cap Type	Screw-on cap
Function	Holds paint/fluid for cup-feed spraying
Replacement Use	Direct replacement by part number

Spray Gun Touch Up 0.5mm Nozzle

AirCraft Spray Gun Touch-Up 0.5mm Nozzle At a Glance; Fine-detail touch-up spray gun with 0.5mm nozzle for small repairs and precision finishing ..

R 349.03

Ex VAT:R 303.50

Stockist

Spray Gun Touch Up 0.5mm Nozzle Blister Pack

AirCraft Spray Gun Touch-Up 0.5mm Nozzle Blister Pack At a Glance; Touch-up spray gun with 0.5mm nozzle in blister pack for precision spot repairs an..

R 572.13

Ex VAT:R 497.50

Stockist

Spray Gun Touch Up 0.5mm Nozzle Blister Pack

AirCraft Spray Gun Touch-Up 0.5mm Nozzle Blister Pack At a Glance; Touch-up spray gun with 0.5mm nozzle in blister pack for precision spot repairs an..

R 572.13

Ex VAT:R 497.50