Nozzle/needle Kit 1.7mm For Ab17g

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG AB17G-2
Weight: 0.14kg
Pack Dim: 173.00mm x 80.00mm x 40.00mm
UPC: 6009515809713

Price:

R 360.53

Ex VAT: R 313.50

Available Options

Stockist

AirCraft Nozzle / Needle Kit 1.7mm For AB17G (SG AB17G-2)

At a Glance: 1.7mm nozzle and needle kit for the AB17G—higher flow for thicker coatings and faster, smoother coverage.

When you need more material flow for heavier coatings, a larger nozzle/needle set makes all the difference. The AirCraft SG AB17G-2 Nozzle/Needle Kit (1.7mm) is designed for the AB17G spray gun and replaces the matched components that control fluid delivery and atomisation. It’s ideal for servicing a worn set or setting up the gun for higher-flow applications where a 1.4mm setup may feel restrictive. Replace the worn parts and you’ll restore a cleaner fan pattern, steadier flow and more predictable spraying—especially with thicker materials that demand a bit more “throughput”.

High-Flow Matched Set: a 1.7mm nozzle & needle kit that restores coverage and control

The needle and nozzle are engineered to work together. If one is worn, scratched or damaged, you can get drips, poor atomisation and inconsistent flow. Replacing them as a matched set is the most reliable way to restore performance and reduce repeat issues.

Extra Information

Paint preparation matters: strain coatings and adjust viscosity for best results—too thick can still cause poor atomisation.
Keep the air cap and passages clean—blocked cap holes can mimic nozzle/needle problems.

Pro Tip

After fitting the 1.7mm set, spray a test pattern and tune fluid/air/fan settings gradually. A little adjustment goes a long way—especially when moving to higher-flow setups.

Features

1.7mm nozzle & needle kit Matched set designed to suit the AirCraft AB17G spray gun
Higher-flow capability Suited to thicker coatings and faster coverage work
Restores atomisation Helps recover an even fan pattern and consistent finish
Service-focused spare part Ideal for maintenance, repairs and rebuilds

Benefits

Better flow for thicker materials: Helps the gun spray heavier coatings more comfortably
Smoother coverage: Improves consistency and reduces patchiness from worn components
Reduced leaks and drips: Matched components support improved sealing and clean shut-off
Cost-effective upgrade/repair: Refresh performance without replacing the whole spray gun

Safety

Disconnect from the air supply before disassembly and parts replacement.
Wear eye protection when handling solvents and small components.
Use cleaners/thinners in a well-ventilated area and keep away from flames or sparks.
After reassembly, test spray at low pressure first to confirm proper sealing and safe operation.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG AB17G-2
Product Type	Nozzle / Needle Kit (Spare Part)
Size	1.7mm
Compatible Model	AirCraft AB17G Spray Gun
Application	Higher-Flow Spraying, Repair, Maintenance, Rebuild