Nozzle Kit 0.3mm For A130 Airbrush

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG A130-1-2
Weight: 0.00kg
Pack Dim: 133.00mm x 80.00mm x 12.00mm
UPC: 6009515888954

Price:

R 188.03

Ex VAT: R 163.50

Available Options

Stockist

AirCraft SG A130-1-2 Nozzle Kit 0.3mm – For A130 Airbrush

At a Glance: 0.3mm nozzle kit for the AirCraft A130 airbrush—ideal all-round setup for smooth coverage, gradients and controlled detail work.

When an airbrush starts spitting, pulsing or spraying unevenly, the nozzle area is often where the trouble lives. Dried paint, wear, accidental knocks and over-tightening can all damage the nozzle and its sealing surfaces, turning clean atomisation into a frustrating mess.

The AirCraft SG A130-1-2 0.3mm nozzle kit is designed for the AirCraft A130 airbrush (SG A130 series) and provides the key nozzle components needed to restore a consistent, predictable spray pattern. The 0.3mm size is a favourite because it’s a true all-rounder: capable of detail work, but still practical for smooth coverage, base coats and gradients without being as clog-sensitive as ultra-fine setups.

0.3mm All-Round Performance – Clean Atomisation, Easy Control

A fresh nozzle kit helps your A130 airbrush spray evenly again, giving you stable flow and a balanced spray pattern that suits most everyday airbrushing tasks.

Extra Information

When to replace the nozzle kit: recurring clogs, uneven spray pattern, paint spitting, visible damage, or poor performance even after thorough cleaning.
Best performance: Pair with the correct needle size for a 0.3mm setup and ensure parts are seated correctly.
Paint prep: Thin and strain paint when needed—clean paint reduces nozzle wear and blockages.
Cleaning tip: Clean immediately after use to prevent dried paint in the nozzle and air cap area.
Installation care: Avoid over-tightening—precision parts can crack or distort if forced.

Pro Tip

After installing the nozzle kit, spray cleaner/water first and gradually increase pressure until the spray pattern is stable—then switch to paint once everything feels smooth and consistent.

Features

0.3mm Nozzle Kit Complete nozzle-area refresh for consistent atomisation and reliable performance.
Designed For A130 Compatible with the AirCraft A130 airbrush (SG A130 series).
Balanced Spray Pattern 0.3mm size offers a practical mix of detail capability and smooth coverage.
Ideal For Repairs & Servicing Great when the nozzle is damaged, blocked or worn beyond cleaning.

Benefits

Restore Smooth Spraying: Helps eliminate spitting and uneven patterns caused by worn nozzle components.
More Reliable Results: Stable atomisation supports cleaner finishes and smoother blends.
Less Clogging Sensitivity: 0.3mm setups are typically more forgiving than finer sizes with everyday paints.
Extend Airbrush Life: Refreshing the nozzle area helps protect the needle and internal seating surfaces.

Safety

Disconnect and depressurise the air supply before disassembling the airbrush.
Use eye protection during cleaning and when working with solvents or cleaners.
Work in a well-ventilated area, especially with solvent-based paints or thinners.
Do not force or over-tighten nozzle parts—precision components can crack if stressed.
Test spray with cleaner/water first to confirm correct assembly before spraying paint.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG A130-1-2
Product Type	Airbrush Nozzle Kit
Nozzle Size	0.3mm
Compatible Model	A130 Airbrush (SG A130 Series)
Application	Nozzle Area Service / Atomisation & Spray Pattern Restoration
Use Case	Base Coats, Gradients, Shading, Detail & General Spraying