Festool MFK 700 EQ/B-Plus Module Edge Router

Extra Information

• This Vermont Sales product is listed as FES576241 and corresponds to the Festool MFK 700 EQ/B-Plus edge router.
• Festool’s current product page redirects this older item to the current MFK 700 KA EQ-Plus product data.
• The EQ/B-style edge-routing setup is optimised for plastic and veneered edges, especially where clean flush trimming and rounded finishing are required.
• The router table has a 130 mm support area for stable guidance along the workpiece.
• The chip deflector helps with dust extraction and also assists when routing angled edges.
• Use with a suitable Festool dust extractor for cleaner work and better visibility around the cutting area.
• For best results, use sharp, suitable Festool cutters matched to the edging material and required profile.

Features

• 720 W motor: Provides strong routing performance for edge trimming and finishing work.
• Variable speed range: 10 000 - 26 000 min⁻¹ for matching cutter speed to the material and application.
• 6 - 8 mm clamp diameter: Allows use of suitable standard cutters within the approved shank range.
• 14 mm fine cutter stroke: Supports accurate routing depth setting and repeatable edge finishing.
• Maximum 32 mm cutter diameter: Allows a practical range of edge-routing cutters to be used.
• Integrated dust extraction: Dust extraction is built directly into the router table for cleaner routing and better visibility.
• Hard fibre base runner: Glides smoothly and helps protect the workpiece surface from damage.
• Spindle stop: Makes cutter changes quicker and easier.
• Temperature monitoring: MMC electronics help protect the motor during demanding routing work.

Benefits

• Cleaner edge finish: The ball bearing brake and controlled guidance help produce smoother, streak-free edge results.
• Better routing control: The wide support table and balanced design reduce tipping and improve handling.
• Less surface damage: The hard fibre base runner and ball bearing brake help protect finished panels and delicate edging.
• Faster setup: Fine depth adjustment and quick cutter changes make it easier to dial in the exact cut.
• Improved dust control: Integrated extraction helps pull chips away from the cutter and work surface.
• Professional edging workflow: Ideal for cabinetmakers and installers working with laminate, veneer and plastic edge banding.

Application

• Flush trimming protruding plastic edges
• Flush trimming veneered edges
• Rounding off plastic and veneered edging
• Finishing edge banding after application
• Trimming angled edges from 0° to 45°, depending on the cutter used
• Cabinetmaking, joinery and furniture manufacturing
• Shopfitting and installation work
• Edge finishing after use of the Festool CONTURO KA 65 edge bander

Safety

• Wear eye, ear and dust protection when routing plastic, veneer, laminate, timber or board materials.
• Use only suitable cutters within the approved shank and diameter range.
• Disconnect the plug-it cable before changing cutters, fitting accessories or cleaning the machine.
• Make sure the cutter is sharp, undamaged and securely clamped before switching on the router.
• Do not exceed the maximum approved cutter diameter for the machine.
• Keep hands clear of the cutter and never adjust the routing depth while the cutter is running.
• Support the workpiece properly and guide the router with a stable grip.
• Use dust extraction where possible, especially when routing plastics, MDF, chipboard or coated board materials.
• Allow the cutter to stop completely before placing the machine down.
• Use only compatible Festool accessories, cutters, collets and extraction equipment.

Specifications

In the box:

• Festool MFK 700 EQ/B-Plus module edge router
• SZ-D 8/OF 1010 collet
• Open ended spanner WAF 19
• plug-it cable H05 RN-F-4
• Systainer³ SYS3 M 187