Router Bit Straight 7/8" (22.22mm)

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 146
Model: CKP209
Weight: 0.06kg
Pack Dim: 138.00mm x 80.00mm x 35.00mm
UPC: 6009675085293

Price:

R 91.77

Ex VAT: R 79.80

Available Options

Stockist

Straight Router Bit Two Flute

Cutting Diameter: 7/8" (22.22mm)
Classification: Standard (Yellow)

The Two-Flute Straight Router Bit is a core staple for any woodworker who demands a fine finish on basic, square-sided cuts.

Engineered with two precision-ground carbide-tipped cutting edges, this bit provides superior balance and minimal vibration by allowing two cuts per revolution. This geometry results in an exceptionally smooth and clean surface ideal for applications where the final appearance is critical.

It is the perfect choice for routing precise grooves, dadoes, and rabbets in hardwood, softwood, plywood, and various composite materials.

While the two flutes offer a cleaner cut than single-flute alternatives, requiring a slightly slower feed rate for optimal chip clearance, the trade-off is a high-quality, professional finish, making it indispensable for joinery work, cabinet construction, and general-purpose edge-routing.

Application:

Router bits are for use with router machines only.
Be sure that at least 3/4 of the shaft length is inserted into the router collet.
Do not "bottom-out" the bit in the collet. The shank should be 1/8" from the bottom of the collet.
Route in two or more passes when large amounts of stock must be removed.
Carpenters
Craftsmen
Hobbyists
Woodworking
DIY

Extra Information

For deep grooves, make several shallow passes to reduce stress on the router and bit.
Match speed and feed rate to the material’s hardness for best results.
Ensure the bit is correctly seated and securely clamped in the collet.
Use dust extraction and proper lighting for clean, accurate work.

Pro Tip

When routing across veneer or laminated surfaces, make a light scoring pass first to protect the top layer before full-depth cuts.
Use a straightedge guide or fence to keep long grooves true and consistent across panels.

Features

⅞″ (22.22 mm) cutting diameter — perfect for wide grooves and clearance routing.
Straight cutting edges produce clean, square-walled cuts with flat bottoms.
Carbide-tipped edges ensure long life and consistent sharpness.
Balanced, rigid body for low vibration and smooth performance.
Router-collet compatible — fits securely for accurate control.

Benefits

High efficiency: removes material quickly while maintaining cut precision.
Clean finish: delivers smooth, flat bottoms and crisp shoulders.
Versatile use: ideal for joinery, dado work, mortising, and panel recessing.

Safety

Always wear eye, hearing and dust protection when routing.
Feed against the rotation of the bit to maintain control and prevent kickback.
Allow the router to reach full speed before engaging; stop fully before lifting out.
Inspect the bit before each use; replace if dull, damaged, or chipped.

Description	Specification
Packaging Type	Hanging card / Blister
Material	Cutting Edge: Tungsten Carbide Body & Shank: HSS (High Speed Steel)
Package Dimensions	138(L) x 78(W) x 46(H)mm
Package Weight	64.54g
Tool Dimensions	56.36(L) x Ø22.22mm
Tool Weight	43.15g
Cutting Diameter	7/8"
Country of Origin	Republic of China (PRC)
Warranty	6 Months
Content	1x Straight Router Bit