Metal Flow Control 10mm X 1/2" M

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 186
Model: SG MSC10-04
Weight: 0.12kg
Pack Dim: 55.00mm x 25.00mm x 48.00mm
UPC: 6009515891985

Price:

R 282.79

Ex VAT: R 245.90

Available Options

Stockist

AirCraft Metal Flow Control 10mm x 1/2" Male Thread (SG MSC10-04)

At a Glance: Precision metal flow control valve with 10mm push-in tube port and 1/2" male thread—dial in stable airflow and smoother pneumatic motion.

When you’re working with 10mm pneumatic tubing and a larger threaded port, airflow can go from “useful” to “wild” very quickly. The AirCraft SG MSC10-04 Metal Flow Control gives you the fine adjustment you need to keep cylinders, actuators, and air circuits running smoothly and predictably. With a 10mm push-in tube connection and a 1/2" male threaded port, it’s ideal for machine pneumatics and workshop air setups where stable speed control and reliable performance matter.

Standout feature: Fine airflow adjustment with a robust 1/2" male connection

Restrict airflow in controlled steps to reduce jolts, improve repeatability, and keep pneumatic motion calm and consistent under working pressure—especially on higher-flow setups.

Extra Information

Ideal for pneumatic cylinders, actuator speed control, machine pneumatics, and regulated compressed air circuits.
For best sealing, use clean, square-cut 10mm tubing and ensure it is fully seated in the push-in port.
Many flow controls are directional—check for any arrow/markings on the body (if present) to confirm recommended flow direction.
Admin info (not for specs table): Confirm product weight and dimensions from your database / packaging.

Pro Tip

With higher-flow 10mm lines, start with the valve more open and restrict gradually while cycling the actuator. Aim for smooth, repeatable motion rather than maximum restriction.

Features

Adjustable flow control Fine-tune airflow to suit your application requirements.
10mm push-in tube connection Quick-fit installation for fast line routing and easy maintenance.
1/2" male thread Larger threaded connection for compatible pneumatic ports, valves, and manifolds.
Metal construction Tough, workshop-ready build for dependable long service life.
Compact profile Fits neatly into control boxes and tight pneumatic layouts.

Benefits

Smoother actuator movement: Helps prevent harsh starts/stops and improves cylinder control.
Less noise and wasted air: Use only the airflow you need for quieter, more efficient operation.
Faster tuning and troubleshooting: Simple adjustment makes commissioning and optimisation easier.

Safety

Always depressurise the air system before installing, removing, or adjusting pneumatic fittings.
Wear eye protection when working with compressed air lines and push-in fittings.
Do not over-tighten threaded connections—tighten securely and use an appropriate thread seal (if required).
After installation, perform a leak test and verify stable operation before returning equipment to service.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG MSC10-04
Product Type	Metal Flow Control Valve
Tube Size	10mm
Thread Size	1/2"
Thread Type	Male
Typical Use	Pneumatic Flow / Speed Control (Compressed Air)
Body Material	Metal