Pu Hose Fitting Manifold 4 X 10mm Port X 1/4"m

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: SG APKD10-02
Weight: 0.05kg
Pack Dim: 10.30mm x 4.00mm x 2.00mm
UPC: 6009515846404

Price:

R 78.43

Ex VAT: R 68.20

Available Options

Stockist

AirCraft PU Hose Fitting Manifold 4 x 10mm Ports x 1/4" Male (SG APKD10-02)

At a Glance: 4-Port Manifold: Four 10mm Push-In Outlets with 1/4" Male Thread Inlet

When you need one air feed to supply multiple lines neatly, the AirCraft SG APKD10-02 PU hose fitting manifold is a tidy, compact solution. It features a 1/4" male threaded inlet and four quick push-in ports for 10mm pneumatic tubing—ideal for distributing air to several actuators, valves or air-assisted stations while keeping your installation clean, organised and easy to maintain.

Compact Pneumatic Manifold for Clean Multi-Line Distribution

This manifold-style fitting acts as a mini air distribution block: connect it to a 1/4" threaded port, then run up to four 10mm tube lines from the push-in outlets. Perfect for automation, packaging rigs, air-assisted applications and workshop pneumatics where tidy routing matters.

Extra Information

Designed for 10mm outside diameter pneumatic tubing (commonly PU/nylon air line).
The inlet is a 1/4" male thread for connection to standard pneumatic ports and adapters.
Use an appropriate thread sealing method where required and avoid overtightening—tighten firmly, then leak-check.

Pro Tip

Cut tube ends square and clean before inserting. Push fully until seated, then tug lightly to confirm each line is locked. Once pressurised, check all outlets for leaks for a reliable setup.

Features

Four push-in outlets Connect up to four 10mm pneumatic tube lines quickly.
1/4" male threaded inlet Fits common pneumatic ports on regulators, valves and manifolds.
Compact manifold body Keeps air line routing organised in tight installations.
One-touch tube connections Quick assembly and easier maintenance without special tools.

Benefits

Neater systems: Creates a central distribution point to reduce clutter and simplify routing.
Faster installs: Push-in ports make tubing runs quick and clean.
Easy to expand: Add or reroute lines without rebuilding your whole air circuit.

Safety

Always isolate and depressurise the air system before installing or removing pneumatic fittings.
Wear eye protection when working with compressed air lines and pressurised components.
After installation, check for leaks using soapy water or an approved leak-detection method.
Do not use damaged tubing or fittings, and never exceed the pressure ratings of your pneumatic system components.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG APKD10-02
Product Type	Pneumatic Manifold / Air Line Distributor
Outlet Ports	4 x Push-In (for 10mm Tube)
Tube Size	10mm (OD)
Inlet Thread	1/4" Male
Configuration	4-Way Distribution
Typical Use	Compressed Air / Pneumatic Systems