Elbow 8mm-1/8 M Pu Hose Fitting

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 2386
Model: SPL08-01
Weight: 0.02kg
Pack Dim: 24.00mm x 13.00mm x 13.00mm
UPC: 6009515828820

Price:

R 23.29

Ex VAT: R 20.25

Available Options

Stockist

AirCraft Elbow 8mm-1/8" M BSP PU Hose Fitting

At a Glance: 8mm push-in tube connection to 1/8" Male BSP thread in a space-saving 90° elbow.

Clean corners, tidy air lines, and quick installs. The AirCraft Elbow 8mm-1/8" M BSP PU Hose Fitting is a push-in pneumatic connector that joins 8mm tubing to a 1/8" BSP female port while giving you a neat 90° turn at the connection point. It’s ideal for compact compressed-air setups on compressors, FRLs, regulators, manifolds and pneumatic tools where straight fittings would force tight bends, strain the tubing, or clutter the layout.

Standout feature or series/quality/range: AirCraft Push-In Pneumatic Fittings

Quick push-in tube connections designed for neat routing, fast maintenance and dependable pneumatic performance in workshop and industrial air systems.

Extra Information

Designed for 8mm OD PU or nylon pneumatic tubing. Use a clean, square-cut tube end for best sealing.
Thread check: This fitting is 1/8" Male BSP. Confirm your port thread type (BSP vs NPT) before fitting.
Use a suitable thread sealant (PTFE tape or pneumatic thread sealant) as required by your application and equipment guidelines.

Pro Tip

Push the tube in fully until it bottoms out, then pull back gently to confirm it’s locked—finish with a quick leak test using soapy water.

Features

Push-in 8mm tube connection Fast, tool-free tubing fitment for clean pneumatic plumbing.
1/8" Male BSP thread Fits common BSP threaded ports on pneumatic components.
90° elbow design Routes tubing around corners to reduce kinking and stress.
Compact body Ideal for panels, cabinets and tight installations.

Benefits

Neater installations: Improves hose routing and reduces clutter around ports and valves.
Faster servicing: Push-in connection makes tube changes quick during maintenance.
Reduced leak potential: Correct tube insertion and proper thread sealing help minimise air loss.

Safety

Isolate and depressurise the air system before installing or removing pneumatic fittings.
Wear eye protection when working with compressed air and pressurised lines.
Do not over-tighten threaded connections—use correct tools and a suitable thread sealant to prevent damage and leaks.
After installation, leak-test the joint before returning equipment to service.
Use only within the rated limits of your pneumatic system and compatible tubing/materials.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SPL08-01
Product Type	Push-In Pneumatic Elbow Fitting
Tube Size	8mm (OD)
Thread Type	BSP
Thread Size	1/8" Male
Connection Angle	90° Elbow
Typical Use	Compressed air / pneumatic tubing lines (PU/Nylon)