Pu Fitting Str. Stud W/o-ring 12mm-1/4" M

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 279
Model: SG SPC12-G02
Weight: 0.04kg
Pack Dim: 20.00mm x 20.00mm x 20.00mm
UPC: 6009515846503

Price:

R 53.53

Ex VAT: R 46.55

Available Options

Stockist

AirCraft PU Fitting Straight Stud With O-Ring 12mm x 1/4" BSP Male (SG SPC12-G02)

At a Glance: 12mm push-in tube to 1/4" BSP Male (M) thread with O-ring seal

Make your pneumatic line setup faster and tidier with the AirCraft SG SPC12-G02 straight stud fitting. Designed to connect 12mm pneumatic tubing to a 1/4" BSP male threaded port, it combines a push-in collet for rapid tube installation with an O-ring seal to help reduce leaks at the port interface. It’s a reliable, workshop-friendly solution for compressors, regulators, manifolds and air distribution blocks where a straight, compact fitting keeps your system running smoothly.

Standout feauture or series/quality/range: O-ring sealed straight stud reliability

The integrated O-ring supports dependable sealing at the port face, helping minimise pressure loss and keeping your air system efficient—especially in busy workshop environments.

Extra Information

Use with compatible 12mm OD pneumatic tubing (commonly PU or nylon) for best grip and sealing.
Cut tubing square and insert fully to help the internal seal seat correctly.
Confirm your port thread is BSP before installation to avoid thread damage or poor sealing.
To remove tubing: depressurise the line, press the collet in, then pull the tube out gently.

Pro Tip

If the port seals on the O-ring face, skip thread tape—keep the O-ring clean, seat it properly, and tighten snugly without over-tightening.

Features

12mm push-in tube connection Quick insert-and-lock design for efficient pneumatic installs.
1/4" BSP Male (M) threaded stud Fits standard BSP ports commonly found on air system components.
O-ring sealing design Helps improve sealing at the port interface for dependable performance.
Straight-through configuration Keeps line routing aligned and neat in compact installations.

Benefits

Faster installation and servicing: Push-in tube connection saves time during assembly and maintenance.
Reduced air leaks: O-ring sealing helps cut down pressure loss and wasted compressor cycles.
Cleaner pneumatic layouts: Straight stud design supports a tidy, professional finish.

Safety

Wear eye, ear and dust protection when working around compressed air systems and air tools.
Depressurise the line before installing, removing or adjusting any pneumatic fittings.
Check for leaks after installation (soapy water works well) and re-seat the tube if needed.
Do not over-tighten threaded fittings—tighten securely and avoid damaging threads or seals.

Specifications

Description	Spec
Brand	AirCraft
Cat No.	SG SPC12-G02
Product Type	PU Fitting Straight Stud With O-Ring
Tube Connection	12mm Push-In
Thread Connection	1/4" BSP Male (M)
Thread Standard	BSP
Configuration	Straight
Seal Type	O-Ring