Metal Swiv. Elbow 6mm X 1/8" M

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 97
Model: SG MPH06-01
Weight: 0.02kg
Pack Dim: 32.00mm x 25.00mm x 13.00mm
UPC: 6009515892050

Price:

R 77.57

Ex VAT: R 67.45

Available Options

Stockist

AirCraft Metal Swivel Elbow 6mm x 1/8" Male (SG MPH06-01)

At a Glance; 6mm push-in tube connection to 1/8" male thread in a compact 90° swivel elbow.

The AirCraft SG MPH06-01 Metal Swivel Elbow is a smart solution when your pneumatic line must turn neatly without fighting you during installation. It connects 6mm tubing to a 1/8" male threaded port and features a swivel body that allows easy orientation after tightening—helping prevent twisted tubing and reducing stress on the line. Built from durable metal for workshop use, it’s ideal for compressed-air routing on valves, regulators, manifolds, cylinders and general pneumatic control equipment.

Compact, adjustable 90° AirCraft metal swivel elbow fitting

A sturdy elbow connector that improves routing in tight spaces and allows precise alignment for a cleaner, more reliable pneumatic setup.

Extra Information

Use a suitable thread sealant/PTFE tape on the male thread if required by the port type and your application.
Cut pneumatic tubing square and keep the tube end clean to ensure a secure push-fit seal.
After inserting the tube fully, do a gentle pull-back test, then pressurise and check for leaks with soapy water.

Pro Tip

Tighten the threaded side first, then swivel-align the elbow to your tube route—this keeps the line relaxed and the setup looking professional.

Features

Swivel elbow body Rotates for easy alignment after tightening, improving layout and reducing tube twist.
6mm push-in tube connection Quick, secure connection for clean pneumatic assembly and servicing.
1/8" male threaded outlet Fits common pneumatic ports on regulators, manifolds and valves.
Metal construction Durable, workshop-ready build for everyday compressed-air applications.

Benefits

Neater air line routing; Creates a clean 90° turn in compact spaces without kinks or awkward bends.
Reduced strain and leaks; Swivel alignment helps minimise stress that can lead to air leaks over time.
Quicker installation; Push-in tubing saves time during builds, upgrades and maintenance.

Safety

Always depressurise the air system before installing or removing pneumatic fittings.
Wear eye protection when working with compressed air and pressurised lines.
Do not exceed your system’s rated pressure and regularly inspect tubing for damage or wear.
Pressurise slowly after installation and check all connections for leaks using soapy water (never use open flames).