Metal Swiv. Elbow 4mm X 1/4" M

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 87
Model: SG MPH04-02
Weight: 0.03kg
Pack Dim: 33.00mm x 27.00mm x 17.00mm
UPC: 6009515892043

Price:

R 88.84

Ex VAT: R 77.25

Available Options

Stockist

AirCraft Metal Swivel Elbow 4mm x 1/4" Male (SG MPH04-02)

At a Glance; 4mm push-in tube connection to 1/4" male thread in a compact 90° swivel elbow.

The AirCraft SG MPH04-02 Metal Swivel Elbow is built for clean, confidence-inspiring pneumatic installations where space is tight and air lines must turn neatly. It connects 4mm pneumatic tubing to a 1/4" male threaded port, and the swivel design allows you to orient the elbow perfectly after tightening—helping prevent tube twist and awkward line stress. A solid choice for compressed-air setups on valves, regulators, manifolds, cylinders and workshop equipment where a tidy route and a reliable seal matter.

Compact, adjustable 90° AirCraft metal swivel elbow fitting

A durable elbow connector that keeps air lines neat, reduces strain and allows easy alignment for professional pneumatic layouts.

Extra Information

Use a suitable thread sealant/PTFE tape on the male thread if required by your application and port type.
For best results, cut pneumatic tubing square and keep the tube end clean before inserting.
After insertion, pull back gently to confirm the tube is locked, then pressurise and check for leaks with soapy water.

Pro Tip

Route the tube first, then tighten and swivel-align the elbow—your installation will look sharper and the tube will last longer.

Features

Swivel elbow body Rotates for easy alignment after tightening, improving routing and reducing tube twist.
4mm push-in tube connection Quick, secure tubing installation for efficient assembly and servicing.
1/4" male threaded outlet Fits common pneumatic ports on regulators, manifolds and air control components.
Metal construction Robust, workshop-ready durability for everyday compressed-air use.

Benefits

Cleaner routing; Turns corners neatly in compact spaces without kinks or ugly bends.
Less stress on tubing; Swivel alignment helps reduce strain that can cause leaks or premature wear.
Faster maintenance; Push-in connection speeds up installations, replacements and system changes.

Safety

Always depressurise the air system before installing or removing pneumatic fittings.
Wear eye protection when working with compressed air and pressurised lines.
Do not exceed your system’s rated pressure and inspect tubing for cracks, cuts or wear.
Pressurise slowly after installation and check all joints for leaks using soapy water (never use open flames).