Metal Swiv. Elbow 8mm X 3/8" M

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Stock: 84
Model: SG MPH08-03
Weight: 0.06kg
Pack Dim: 41.00mm x 31.00mm x 20.00mm
UPC: 6009515892111

Price:

R 137.37

Ex VAT: R 119.45

Available Options

Stockist

AirCraft Metal Swivel Elbow 8mm x 3/8" Male (SG MPH08-03)

At a Glance; 8mm push-in tube connection to 3/8" male thread in a compact 90° swivel elbow.

The AirCraft SG MPH08-03 Metal Swivel Elbow is made for pneumatic systems that need a clean corner turn into a larger threaded port—without twisting the tubing or compromising the seal. It connects 8mm pneumatic tubing to a 3/8" male threaded outlet and features a swivel body so you can orient the elbow neatly after tightening. That means cleaner routing, less strain on the line and a more dependable, leak-resistant connection. Ideal for compressed-air installations on manifolds, regulators, valves, cylinders and workshop air systems where space is limited and reliability matters.

Strong, alignment-friendly 90° AirCraft metal swivel elbow fitting

A durable elbow connector for 8mm tubing and larger pneumatic ports—keeps routing tidy and alignment easy.

Extra Information

Use suitable thread sealant/PTFE tape on the male thread if required by the port type and application.
For best sealing, cut tubing square and keep the tube end clean before insertion.
After installation, pressurise slowly and check for leaks with soapy water around both the tube connection and threaded joint.

Pro Tip

Tighten the thread, then swivel-align the elbow—forcing the tube to “set” the direction can add stress and invite leaks.

Features

Swivel elbow body Rotates for alignment after tightening, improving routing and reducing tube twist.
8mm push-in tube connection Quick, secure tubing installation for efficient assembly and servicing.
3/8" male threaded outlet Suits larger pneumatic ports on manifolds, valves and air control components.
Metal construction Robust, workshop-ready durability for everyday compressed-air use.

Benefits

Neat corner routing; Creates a clean 90° turn in compact spaces without kinks or awkward bends.
Reduced strain and leaks; Swivel alignment keeps tubing relaxed and supports longer-lasting seals.
Faster system changes; Push-in tube fitment speeds up installations, upgrades and maintenance.

Safety

Always depressurise the air system before installing or removing pneumatic fittings.
Wear eye protection when working with compressed air and pressurised lines.
Do not exceed your system’s rated pressure and inspect tubing regularly for damage or wear.
Pressurise slowly after installation and check all joints for leaks using soapy water (never use open flames).