Spare Bearing For Pol02

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: POL02-13
Weight: 0.00kg
Pack Dim: 15.00mm x 15.00mm x 11.00mm

Price:

R 78.66

Ex VAT: R 68.40

Available Options

Stockist

Tork Craft Spare Bearing For POL02 Wool Bonnet Polisher

At a Glance; Genuine compact replacement bearing for the Tork Craft POL02 1200W wool bonnet polisher.

Keep your Tork Craft wool bonnet polisher running smoothly with this dedicated spare bearing for the POL02. Over time, bearings in high-speed polishers can wear, causing noise, vibration and uneven polishing. This POL02-13 spare bearing is matched to the original factory specification, restoring smooth spindle rotation and helping the polisher run quietly and efficiently again.

Fitted in the correct position on the POL02 polisher, the bearing supports the rotating components under load, reducing friction and helping to protect the motor and gears from unnecessary stress. It is a small, cost-effective part that can make a big difference to tool life and finish quality on automotive paintwork, metal surfaces and other polishing tasks.

Extra Information

Common signs that a bearing may need replacement include a growling noise, increased vibration, noticeable play on the spindle or a polisher that does not feel as smooth as it used to. Replacing the worn bearing before it fails completely can prevent secondary damage to housings, gears or the motor.

When you service a Tork Craft POL02 polisher, it is good practice to inspect the bearings, brushes, cable and switch at the same time. Using genuine POL02-13 spares keeps the machine aligned with the original design and makes future maintenance and troubleshooting more straightforward for technicians and users alike.

Pro Tip

Pro Tip: After fitting the new bearing and reassembling the polisher, run the POL02 at a lower speed with no load for a short while to confirm smooth operation before returning it to full work. While the machine is open, take the opportunity to blow out dust, check the wool bonnet and backing pad, and give the tool a quick overall inspection for cracks or loose screws.

Features

Genuine Tork Craft spare bearing for the POL02 wool bonnet polisher.
Matched to the original bearing specification used in production.
Supports smooth rotation of the polisher’s moving components.
Helps to reduce excessive noise and vibration during use.
Compact spare part that is easy to keep on hand for maintenance.
Designed for use with 1200W variable-speed rotary polishing work.

Benefits

Restores smooth running and helps improve handling comfort.
Can extend the working life of the POL02 polisher when replaced timeously.
Reduces the risk of rough running that can spoil the final surface finish.
More reliable performance during continuous or professional use.
Correct spare part fitment gives peace of mind over generic bearings.

Safety

Always unplug the polisher from the mains before opening the housing or working on internal parts.
Allow the tool to cool down fully before handling components near the motor or gearing.
Ensure all screws, covers and guards are properly refitted before use.
Only use the POL02-13 spare bearing on the specified Tork Craft POL02 model.
If you are unsure about disassembly or reassembly, consult a qualified technician or an approved service centre.

Specifications

Technical
Brand	Tork Craft
Model No.	POL02-13
Product Type	Spare Bearing
Compatible Tool	POL02 Wool Bonnet Polisher
Tool Wattage	For 1200W Rotary Polisher
Application	Replacement bearing for supporting rotating components in the POL02 polisher
Category	Spare Part

Polisher 1200w Wool Bonnet 180mm With 4m Cord

Tork Craft POL02 1200W Polisher with 180mm Wool Bonnet At a Glance: 1200W automotive polisher with 1100 - 3500 RPM variable speed, Ø180mm wool bonnet..

R 2,408.10

Ex VAT:R 2,094.00