Tork Craft Replacement Inserts M10 X 1.5 X 20mm 2D 20pc for NR5010

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: NR5010-03
Weight: 0.08kg
Pack Dim: 117.00mm x 98.00mm x 21.00mm
UPC: 6009515859510

Price:

R 144.90

Ex VAT: R 126.00

Available Options

Stockist

Tork Craft NR5010-03 Replacement Inserts M10 X 1.5 X 20mm 2D 20pc

At a Glance: 20 replacement stainless steel M10 x 1.5mm thread inserts, 20mm long, for the Tork Craft NR5010 internal thread repair kit.

The Tork Craft NR5010-03 Replacement Inserts are designed for use with the Tork Craft NR5010 M10 x 1.5 internal thread repair kit. These inserts are used to repair damaged, stripped, worn or over-used internal M10 threads, helping restore the original thread size so that an M10 x 1.5mm fastener can be used again.

Manufactured from stainless steel, these 2D replacement inserts create a durable new internal thread surface once installed into a correctly drilled and tapped repair hole. The 20mm insert length provides deeper thread engagement than the shorter 1D and 1.5D inserts, making this pack ideal for stronger M10 repairs where the hole depth allows.

Long 2D replacement insert pack for deeper M10 internal thread repairs

This 20 piece insert pack replenishes the inserts used with the NR5010 thread repair kit. The 20mm 2D length is a great choice when a deeper and more secure repaired thread is preferred for construction, DIY, automotive and workshop repair applications.

Product highlights

20 piece insert pack Supplied with 20 replacement inserts for multiple M10 thread repairs.
M10 x 1.5mm thread size Designed for repairing M10 internal threads with a 1.5mm pitch.
2D insert length 20mm insert length provides deeper thread engagement for suitable repairs.
Stainless steel construction Creates a durable replacement thread surface inside the repaired hole.
For NR5010 repair kit Replacement inserts made for the Tork Craft NR5010 internal thread repair kit.
Carded blister packaging Supplied on a hanging card for convenient storage, display and identification.

Extra Information

NR5010-03 is the 2D replacement insert pack for the Tork Craft NR5010 M10 x 1.5mm internal thread repair kit.
2D means the insert length is two times the thread diameter. For M10, this gives an insert length of approximately 20mm.
This insert length is longer than the NR5010-01 10mm 1D insert and the NR5010-02 15mm 1.5D insert.
These inserts are used only after the damaged hole has been correctly drilled and tapped using the correct thread repair tools.
The inserts are for internal thread repair and are not used for cutting external threads on bolts or rods.
Always confirm the available hole depth before selecting a 20mm insert.

Pro Tips

Use the 20mm 2D insert when the application allows for deeper thread engagement and a longer repair length.
Before installation, check that the hole is deep enough for the full insert length and the fastener being used.
Always clean the tapped hole properly before installing the insert. Swarf or dirt can prevent correct seating.
Use the correct installation tool from the NR5010 kit and wind the insert in carefully to avoid damaging the coil.
Install the insert approximately 1/4 to 1/2 turn below the surface where possible for a neat finished repair.
Break off and remove the tang after installation before fitting the bolt.

How to Use

Confirm that the damaged internal thread is M10 x 1.5mm and that a 20mm 2D insert is suitable for the repair depth.
Use the correct drill and STI tap from the NR5010 thread repair kit to prepare the damaged hole.
Clean the tapped hole thoroughly to remove chips, swarf and loose material.
Fit the replacement insert onto the installation tool from the NR5010 kit.
Wind the insert into the tapped hole using the installation tool until it is correctly positioned.
Use the break tool to snap off the insert tang.
Check the repaired thread by carefully threading in the correct M10 x 1.5mm fastener by hand before final assembly.

Features

Replacement thread inserts Replenishes the inserts used with the NR5010 thread repair kit.
Metric internal thread repair Suitable for M10 x 1.5mm internal thread repairs.
Long 2D insert length 20mm insert length provides deeper thread engagement for suitable applications.
Stainless steel inserts Provides a tough replacement thread once installed correctly.
Workshop-ready pack Convenient 20 piece pack for repeated thread repair work.

Benefits

Extends the use of the repair kit: Keeps the NR5010 kit ready for additional repairs after the original inserts have been used.
Restores the original thread size: The repaired hole accepts the original M10 x 1.5mm fastener size.
Helps save damaged components: Allows damaged threaded holes to be repaired instead of replacing the complete part.
Ideal for deeper repairs: The 20mm 2D insert provides longer thread engagement where the hole depth allows.
Durable repair finish: The stainless steel insert creates a new internal thread surface inside the repaired hole.

Application

Replacement inserts for the Tork Craft NR5010 internal thread repair kit.
Repairing damaged M10 x 1.5mm internal threads.
Restoring stripped, worn or over-used threaded holes.
Deeper internal thread repairs where a 20mm insert length is suitable.
Automotive repair and maintenance work.
Construction, DIY, workshop and general engineering applications.

Safety

Always use the correct tool for the job.
Using any tool can be dangerous when incorrect procedures are followed.
Wear eye protection when drilling, tapping and breaking off the insert tang.
Run the drill bit at the correct RPM for the drill diameter and material being drilled.
Use suitable tapping fluid during the tapping process.
Ensure the drill bit and tap are clean and in good condition before use.
Clamp or secure the workpiece before drilling or tapping.
Keep hands clear of sharp swarf, drill flutes, tap edges and repaired threads.
Follow all safety procedures and instructions shown on the product, packaging or manual for optimal performance.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	NR5010-03
Barcode	6009515859510
Product Type	Replacement Thread Inserts
Product Description	Thread Repair Kit M10 X 1.5 X 20mm (2D) Replacement Inserts For NR5010
Thread Type	Internal Thread Repair
Thread Size	M10
Thread Pitch	1.5mm
Insert Length	20mm
Insert Length Ratio	2D
Insert Material	Stainless Steel
Quantity	20pc
Compatible Kit	NR5010
Product Classification	Standard Yellow
Packaging Type	Hanging Card / Blister
Sales Unit	Each
Related Insert Packs	NR5010-01, NR5010-02