Polisher Service Kit Repl Cord & Sleeve (44/45) For My3016-2

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: MY3016-2-SK17
Weight: 0.22kg
Pack Dim: 148.00mm x 318.00mm x 318.00mm
UPC: 6009515852238

Price:

R 226.55

Ex VAT: R 197.00

Available Options

Stockist

Tork Craft Polisher Service Kit Repl. Cord And Sleeve (44/45) For MY3016-2

At a Glance; Genuine replacement mains cord and strain relief sleeve for MY3016-2

The Tork Craft Polisher Service Kit Repl. Cord And Sleeve (44/45) For MY3016-2 is a genuine power cord and strain relief set for your stainless pipe polisher. Long cable runs, tight coils and tough site conditions can leave the original lead nicked, flattened or pulling loose where it enters the handle. This MY3016-2-SK17 kit replaces both the mains cord and the protective sleeve so your Tork Craft MY3016-2 stainless pipe polisher can plug in safely again with proper support at the entry point.

Standout feature – matched cord and sleeve set tailored to the MY3016-2 long-handle polisher

The cord and sleeve in this kit are sized and shaped for the MY3016-2 (items 44 and 45 on the parts diagram), so they fit the original clamp and housing perfectly. That means the cable sits where it should, the sleeve absorbs bending and the strain is taken off the internal connections, helping to keep your stainless pipe polisher safe and dependable on site.

Extra Information

Only suitable for the Tork Craft MY3016-2 stainless pipe polisher – always confirm the model number on the rating plate.
Ideal when the original cord shows cuts, exposed conductors, hard kinks or a loose entry point at the handle.
Fit together with a visual check of the switch, speed control and strain relief areas while the handle is open.

Pro Tip

When installing the new cord, route the cable so there is a small service loop inside the handle instead of pulling it dead tight. This bit of slack works as a shock absorber whenever the lead is tugged or flexed, helping your new MY3016-2-SK17 cord and sleeve last much longer.

Features

Genuine Tork Craft replacement kit designed specifically for the MY3016-2 stainless pipe polisher.
Replacement mains cord and sleeve corresponding to components 44 and 45 on the exploded diagram.
Correct cord rating and length to suit the motor power and reach of the long-handle polisher.
Purpose-made strain relief sleeve supports the cord where it enters the rear handle housing.

Benefits

Improved electrical safety: replaces damaged or suspect leads to reduce the risk of shocks and shorts.
More reliable operation: a sound cord and sleeve help prevent intermittent power loss during use.
Professional repair: using genuine parts keeps the tool close to its original factory specification.

Safety

Always disconnect the polisher from the mains and allow it to cool before opening the handle or working on the cord.
Ensure all live, neutral and earth connections are correctly terminated and insulated according to local regulations.
Check that the strain relief sleeve and cord clamp are secured firmly so the cable cannot pull out under tension.
If you are not qualified to work on electrical equipment, have the MY3016-2-SK17 kit fitted by a competent technician.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	MY3016-2-SK17
Product Type	Polisher Service Kit – Replacement Cord And Sleeve
Compatible Tool	Tork Craft MY3016-2 Stainless Pipe Polisher
Components Included	Replacement Cord And Sleeve (Items 44, 45)
Cord Function	Mains Power Supply To The Tool
Sleeve Function	Strain Relief And Protection At Handle Entry
Spare Category	Stainless Pipe Polisher Spares
UPC	6009515852238