Menu
Your Cart

Magnum EvenFlow Pressure Roller Kit Complete 23 cm with 50 cm Extension and Contractor Inline Valve

Magnum EvenFlow Pressure Roller Kit Complete 23 cm with 50 cm Extension and Contractor Inline Valve
Magnum EvenFlow Pressure Roller Kit Complete 23 cm with 50 cm Extension and Contractor Inline Valve
  • Brand: MAGNUM
  • Model: MAG245397
  • Weight: 1.95kg
  • Dim: 825 mm x 330 mm x 65 mm
  • UPC: 633955776913
Price:
R 26,374.10
Ex VAT: R 22,934.00

Available Options

Magnum EvenFlow Pressure Roller Kit 245397 complete

The Magnum EvenFlow Pressure Roller Kit 245397 is designed for the rolled application of architectural paints and coatings using a compatible airless paint supply system. The kit combines a 23 cm EvenFlow roller frame, 13 mm nap roller cover, 50 cm heavy-duty extension and Contractor Inline Valve. Brief pulls of the inline valve trigger supply more paint to the roller as required, reducing repeated loading from a paint tray.

A pressure roller uses a pump to deliver paint through the hose, inline valve and extension into the roller assembly. The included Contractor Inline Valve controls paint replenishment while you roll the surface.

Product Highlights

  • EvenFlow roller frame: 23 cm frame for pressure-fed roller application.
  • Contractor Inline Valve included: Trigger-controlled paint supply with a trigger safety lever.
  • 50 cm heavy-duty extension: Adds reach between the inline valve and roller head.
  • 13 mm nap roller cover: Supplied with the kit for roller application of compatible coatings.
  • Low-pressure rolling: Use the lowest pressure that supplies paint evenly, typically no more than 21 bar.

Compatibility

  • Requires a compatible airless paint pump and paint hose.
  • Supplied with the Contractor Inline Valve, model 244161.
  • Use only Graco paint hoses, as specified in the instruction manual.
  • Replacement 23 cm roller covers listed in the manual include 107589 with 9.5 mm nap, 107590 with 13 mm nap, 107591 with 19 mm nap and 107592 with 32 mm nap.
  • Compatible heavy-duty extension options listed in the manual include 232121, 232122, 232123, 232124 and 232125.

Note: Confirm pump, hose connection and coating compatibility before ordering. The paint pump and hose are not included in this kit. Optional covers and extensions are supplied separately.

Features

  • EvenFlow roller assembly receives paint through the connected extension.
  • Contractor Inline Valve allows paint delivery to be controlled with short trigger pulls.
  • Inline valve incorporates a trigger safety lever and a serviceable paint filter inside the handle.
  • Heavy-duty extension provides 50 cm of additional reach.
  • Roller cover, end caps and diffusers can be removed for cleaning.

Benefits

  • Reduces interruptions to reload the roller from a tray.
  • Allows paint replenishment to be matched to your rolling speed.
  • Includes the inline control valve required for this roller arrangement.
  • Removable roller components and an accessible valve filter support cleaning and maintenance.

Application

For the rolled application of architectural paints and coatings that are compatible with the connected airless system. Suitable for painting tasks where a roller finish is required with paint supplied directly from the pump.

Operating pressure and maximum inlet pressure

The assembly has a maximum fluid inlet pressure of 248 bar (3600 psi / 24.8 MPa). For rolling, use the lowest pressure that provides an even paint supply. The manual states that this typically does not exceed 21 bar (300 psi / 2.1 MPa). Increase pressure only if triggering the inline valve cannot supply enough paint for your rolling speed.

Contractor Inline Valve

The included valve controls paint flow to the roller and contains a standard 50 mesh paint filter inside its handle. The manual permits removal of this filter for rolling applications and instructs users to clean filters after each use.

The manual also describes using the valve as an airless spray gun when fitted with a compatible HandTite Guard and RAC5 SwitchTip. These additional spray components are not listed as part of the roller kit.

Cleaning and storage

Flush the pump, inline valve and roller frame immediately after use to prevent paint drying inside the system. Clean the removable roller components with water or a compatible flushing fluid appropriate to the coating. Do not soak the entire inline valve in solvent, as prolonged exposure can damage its packings.

Never leave water in the pump, inline valve or roller frame during storage. For extended storage after flushing with water-based fluid, the manual specifies flushing again with Graco Pump Armor or mineral spirits/paint thinner and leaving the approved storage fluid in the system.

Pro Tips

  • Begin with the lowest pressure at which the pump primes and supplies paint evenly.
  • Use brief trigger pulls only when the roller needs additional paint.
  • Relieve pressure whenever you stop painting, then elevate the roller end of the extension to help prevent paint draining out.
  • Clean the roller assembly and inline valve promptly after each use.

How to Use

  1. Read the roller kit and pump manuals, including all warnings and pressure-relief instructions.
  2. With the pump switched off and pressure relieved, assemble the roller kit and connect it to the Contractor Inline Valve. Tighten the connection with a wrench as instructed in the manual.
  3. Connect the assembly to the compatible paint supply system and prime the pump at its lowest suitable priming pressure.
  4. Set the pump prime/spray valve to SPRAY, disengage the inline valve trigger safety and trigger the valve while rolling until paint reaches the roller.
  5. Continue rolling, briefly triggering the inline valve whenever more paint is needed.
  6. Follow the pressure-relief procedure whenever you stop painting. Flush and clean the system immediately after use.

Safety

  • Relieve system pressure whenever you stop painting and before cleaning, checking leaks, disconnecting components or servicing the equipment.
  • Keep hands and body away from the roller frame outlets during flushing. A high-pressure fluid injection injury requires immediate surgical treatment.
  • Engage the inline valve trigger safety when the equipment is not in use. Keep the trigger guard fitted, and use the required tip guard when operating with a spray tip.
  • Never exceed the pressure rating of any component in the system.
  • Do not modify the extension or roller frame, or install parts not designed for the equipment.
  • Do not use halogenated hydrocarbon solvents, including methylene chloride or 1,1,1-trichloroethane, in this pressurised aluminium equipment.
  • Provide adequate ventilation, follow the pump grounding instructions and keep the work area clear of ignition sources.
  • Keep the roller and extension away from electrical power lines.

Read the manual: Follow all assembly, operation, pressure-relief, cleaning and storage instructions supplied with the pressure roller kit and connected pump.

Product Specifications
Brand: Magnum
Product Description: Pressure Roller Kit with Inline Valve
Vermont Product Code: MAG245397
Manufacturer Model: 245397
Roller Frame: EvenFlow
Roller Frame Size: 23 cm (9 in.)
Supplied Roller Cover Nap: 13 mm (1/2 in.)
Extension Length: 50 cm (20 in.)
Extension Type: Heavy-duty
Included Control Valve: Contractor Inline Valve, model 244161
Standard Inline Valve Filter: 50 mesh
Maximum Fluid Inlet Pressure: 248 bar / 3600 psi / 24.8 MPa
Typical Rolling Pressure: Typically no more than 21 bar / 300 psi / 2.1 MPa; use the lowest pressure that supplies paint evenly
Intended Application: Rolled application of architectural paints and coatings

Scope of Delivery

  • 1 × 23 cm EvenFlow roller frame assembly
  • 1 × 23 cm roller cover with 13 mm nap
  • 1 × 50 cm heavy-duty extension
  • 1 × Contractor Inline Valve

Important: The 248 bar maximum inlet rating is the assembly's pressure limit. Set the pump to the lowest pressure that maintains an even paint supply during rolling, typically no more than 21 bar.

Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy