Arbor Drill Bit 6 X 43mm For Hss Hole Saws

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: TC28650
Weight: 0.01kg
Pack Dim: 146.00mm x 50.00mm x 5.00mm
UPC: 6009515800284

Price:

R 52.21

Ex VAT: R 45.40

Available Options

Stockist

Tork Craft Arbor Drill Bit — 6 × 43 mm (for HSS Hole Saws)

Size: 6 mm diameter × 43 mm length

This Tork Craft arbor drill bit (Cat No. TC28650) is tailored to act as the pilot bit for HSS hole saws in the TC280 series. It features a 6 mm diameter shank and 43 mm overall length to accurately guide and stabilise HSS hole saws during clean and precise cutting through metal sheets and similar substrates.

Extra Information

Ensure the bit is securely mounted in the arbor before inserting the hole saw—loose fit may cause misalignment or damage.
Use appropriate speed and feed rates for HSS cutting—metal sheet drilling often demands lubrication and moderate speed to prolong tool life.

Pro Tip

After drilling holes with the HSS hole saw, swap the pilot bit out when the bit shows signs of wear. Maintaining a sharp pilot ensures longer hole saw life.

Features

6 mm diameter shank — fits the arbor mount for the HSS hole saw range.
43 mm length — designed to align with HSS hole saw depth and provide stable guidance.
Specifically designed for HSS hole saw compatibility — reduces wander and improves hole entry.
Trade-grade quality from Tork Craft — built for reliability in metal-working and fabrication tasks.

Benefits

Accurate guidance: The correct pilot bit helps start holes cleanly and maintain the alignment of the hole saw for cleaner cuts.
Improved hole quality: Using the matching arbor drill bit reduces vibration, improves finish and reduces wear on the hole saw.
Cost-effective accessory: As a dedicated pilot bit, it reduces the need for separate general drills and ensures optimal performance of the hole saw set.

Safety

Wear eye and ear protection when drilling metal sheets—chips and fragments can be ejected.
Secure the workpiece and use a backing board or stable surface if drilling thin sheet or metal to prevent deformation or slippage.
Ensure the hole saw and arbor are firmly clamped in the drill and that the drill is at the correct rpm for metal drilling to avoid overheating or bit breakage.