Festool TSV 60 KEBQ-Plus-FS Plunge-Cut Saw With Scoring Function

Name: Festool TSV 60 KEBQ-Plus-FS Plunge-Cut Saw With Scoring Function
Brand: FESTOOL
SKU: FES577743
Price: 38999.95 ZAR
Availability: OutOfStock

Festool TSV 60 KEBQ-Plus-FS Plunge-Cut Saw With Scoring Function

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: FES577743
UPC: 4014549418819

FESTOOL

Price:

R 38,999.95

Ex VAT: R 33,913.00

Available Options

Stockist

Festool TSV 60 KEBQ-Plus-FS Plunge-Cut Saw With Scoring Function

At a Glance: Plunge-cut saw with integrated scoring function, KickbackStop, 168 mm main blade, 47 mm scoring blade and FS 1900/2 guide rail

The Festool TSV 60 KEBQ-Plus-FS is a precision plunge-cut saw with an integrated scoring function, designed for exceptionally clean panel cutting. It is made for users who need splinter-free results on both sides of the cut from the very first pass, especially when working with veneered boards, plastic-coated panels, HPL compact panels, interior doors and high-value sheet materials. The built-in scoring blade pre-cuts the surface before the main blade follows, helping to produce workshop-quality results even on site. Combined with Festool guide rails, KickbackStop safety technology and a powerful EC-TEC motor, the TSV 60 K is a serious cutting solution for cabinetmakers, shopfitters, installers and fine woodworking professionals.

Splinter-Free Panel Cutting From The First Cut

The TSV 60 K combines a plunge saw with a built-in scoring unit. The scoring blade can be precisely adjusted and switched on or off as required, giving clean cut edges on both sides without needing a separate scoring pass on a stationary saw.

Product highlights

Integrated scoring function: Helps produce splinter-free cuts on both sides from the first cut.
Diamond scoring saw blade: Provides long service life and consistent cut quality for demanding panel materials.
KickbackStop safety: Reduces the risk of injury and workpiece damage caused by kickback during sawing or plunge cutting.
62 mm cutting depth: Gives strong cutting capacity for panel work, interior doors and materials up to 60 mm in practical applications.
Guide rail system: Supplied with FS 1900/2 guide rail for straight, accurate and repeatable cuts.
FS and FSK compatibility: Can be used with FS guide rails for panel cutting or FSK cross cutting guide rails for quick cross cuts.
Mitre-capable scoring: The scoring unit swivels with the main saw for clean mitre cuts from 0° to 45°.
EC-TEC motor: Brushless motor delivers high cutting performance with efficient power use and low maintenance.

Extra Information

The TSV 60 KEBQ-Plus-FS is supplied with the Festool FS 1900/2 guide rail.
The integrated scoring blade helps create splinter-free cut edges on both sides of the material.
The scoring function can be activated or deactivated depending on the application.
The scoring saw blade can be adjusted precisely for depth and track alignment.
KickbackStop stops the motor within a fraction of a second when kickback is detected and the saw can be used again without replacement parts after triggering.
The saw can be combined with FS guide rails for panel cutting and FSK cross cutting guide rails for quick cross cuts.
Use a suitable Festool dust extractor through the 27/36 mm extraction connection for cleaner and more controlled work.
The cut edges can be worked further straight away, making this saw especially useful before edge banding and finishing work.

Pro Tips

Use the scoring function when cutting veneered, laminated or plastic-coated panels where both sides of the cut must stay clean.
Make sure the scoring blade is correctly adjusted before cutting expensive board material. A small test cut can save a very costly mistake.
Use the FS guide rail with suitable clamps or adhesive pads when cutting large panels to keep the rail steady and accurate.
Switch the scoring function off when it is not needed to reduce unnecessary wear on the scoring blade.
Connect dust extraction when cutting coated boards or HPL panels to keep the cutting area clean and improve visibility.
Use the correct main saw blade for the material being cut to achieve the best finish and reduce strain on the saw.

How to Use

Place the FS guide rail accurately on the scribe mark and secure it if required.
Fit the correct main saw blade and scoring blade for the material being cut.
Connect a suitable dust extractor to the 27/36 mm dust extraction connection.
Set the required cutting depth using the depth setting and fine adjustment.
Activate the scoring function when splinter-free cutting on both sides is required.
Set the bevel angle if an angled cut is required.
Place the saw on the guide rail and check that the guide jaws are adjusted without play.
Start the saw and allow it to reach operating speed before entering the material.
Guide the saw steadily along the rail without forcing the cut.
Allow the blade to stop completely before lifting the saw away or making adjustments.

Features

1 500 W main saw power: Provides strong mains-powered cutting performance for demanding sheet and timber materials.
190 W scoring unit: Integrated scoring motor prepares the cut line before the main saw blade cuts through the material.
Variable no-load speed: Main saw speed of 3 000 - 6 800 min⁻¹ and scoring speed of 22 000 min⁻¹.
Main and scoring blades: Uses a 168 mm main saw blade and 47 mm scoring saw blade.
Angular range: Allows bevel cuts from 0 - 45°.
Manual scorer activation: Both the scoring blade and main saw blade can be activated or deactivated as needed.
FastFix blade change: Spindle stop on the main saw blade and additional spindle stop for the scoring blade make blade changes easier.
Tool-free guide jaw adjustment: Allows the saw to run on the guide rail without play for precise cutting.
Transparent viewing window: Improves visibility of the blade and cutting area, especially for plunge cuts.
CLEANTEC extraction: 27/36 mm dust extraction connection for cleaner work when connected to a suitable extractor.

Benefits

Cleaner finished edges: The scoring function helps reduce splintering on both the top and bottom of the workpiece.
Less rework: Cut edges are ready for further work straight away, saving time on trimming or sanding.
Safer cutting: KickbackStop helps minimise the risk of kickback-related injury and damage to the workpiece.
Workshop quality on site: Guide rail accuracy and the scoring system allow clean panel work away from a stationary machine.
Flexible system use: Compatible with Festool FS and FSK rails for panel cutting, cross cuts and mobile site work.
Better control: Fine depth setting, clear viewing windows and play-free guide rail adjustment support precise cutting.
Efficient cutting: The EC-TEC motor and thin-kerf blades help work progress smoothly with less effort.

Application

Splinter-free cutting of chipboard
Splinter-free cutting of veneered and plastic-coated panels
Splinter-free cutting of HPL compact panels such as Trespa®
Precise plunge cuts in materials up to 60 mm thick
Cutting interior doors cleanly to length
Cutting recesses in doors and kitchen worktops
Panel cutting in the workshop or on site
Cross cuts with Festool FSK cross cutting guide rails
Mitre cuts from 0° to 45° with scoring function support

Safety

Read the operating instructions and safety information before using the saw.
Wear suitable eye, ear and dust protection when cutting.
KickbackStop helps reduce the risk of injury from kickback, but it does not replace correct plunge saw safety practice.
Keep both hands on the saw handles and keep hands away from the blade path.
Make sure the guide rail is stable and correctly positioned before starting the cut.
Check that the main blade and scoring blade are properly fitted before use.
Use only suitable saw blades and scoring blades with the correct dimensions and specification for the machine.
Allow the saw to reach full speed before entering the material.
Do not force the saw through the material; guide it steadily along the rail.
Allow the blade to stop completely before lifting the saw from the workpiece or guide rail.
Disconnect the saw from the power supply before changing blades, adjusting the scoring unit, cleaning or carrying out maintenance.
Use dust extraction to reduce airborne dust and improve visibility of the cutting area.

Specifications

Description	Spec
Brand	Festool
Cat No.	FES577743
Model	TSV 60 KEBQ-Plus-FS
Product Type	Plunge-Cut Saw With Scoring Function
Drive Type	Mains
Main Saw Power Consumption	1 500 W
Scorer Power Consumption	190 W
No-Load Speed, Main Saw	3 000 - 6 800 min⁻¹
No-Load Speed, Scorer	22 000 min⁻¹
Saw Blade Diameter, Main Saw	168 mm
Saw Blade Diameter, Scorer	47 mm
Angular Range	0 - 45°
Cutting Depth	0 - 62 mm
Dust Extraction Connection Diameter	27 / 36 mm
Cable Length	4,00 m
Guide Rail Compatibility	Festool FS and FSK Guide Rails
Safety Feature	KickbackStop
Motor Type	EC-TEC Brushless Motor
Blade Change System	FastFix
Product Weight Without Accessories	6,20 kg
Sound Pressure Level LpA	93 dB(A)
Sound Power Level LWA	101 dB(A)
Noise Uncertainty K	3 dB
Sawing Wood Vibration Total Average Ah	2,50 m/s²
Vibration Uncertainty K	1,50 m/s²
Standards Series EN	62841