Menu
Your Cart

Festool FS-EZ 150/2 One-Handed Clamps for Guide Rails and MFT – 150 mm, Pack of 2

Festool FS-EZ 150/2 One-Handed Clamps for Guide Rails and MFT – 150 mm, Pack of 2
Festool FS-EZ 150/2 One-Handed Clamps for Guide Rails and MFT – 150 mm, Pack of 2
Festool FS-EZ 150/2 One-Handed Clamps for Guide Rails and MFT – 150 mm, Pack of 2
Festool FS-EZ 150/2 One-Handed Clamps for Guide Rails and MFT – 150 mm, Pack of 2
Festool FS-EZ 150/2 One-Handed Clamps for Guide Rails and MFT – 150 mm, Pack of 2
Festool FS-EZ 150/2 One-Handed Clamps for Guide Rails and MFT – 150 mm, Pack of 2
Festool FS-EZ 150/2 One-Handed Clamps for Guide Rails and MFT – 150 mm, Pack of 2
  • Brand: FESTOOL
  • Model: FES578623
  • Weight: 0.79kg
  • Dim: 350 mm x 170 mm x 42 mm
  • UPC: 4014549455999
Price:
R 2,045.85
Ex VAT: R 1,779.00

Available Options

Festool FS-EZ 150/2 Multifunctional One-Handed Clamps

At a Glance: Two clamps for clamping, overlap clamping and spreading. Maximum clamping width: 150 mm. Spreading range: 120–310 mm. Compatible with FS/2, FS/2-KP, FSK and suitable MFT clamping grooves.

Secure your guide rail or workpiece while keeping one hand available for positioning with the Festool FS-EZ 150/2 clamp set. The pump-action handle builds clamping pressure, while an integrated release lever makes adjustment and removal convenient. Supplied as a pair, these versatile clamps support a range of workshop and site tasks.

Change between clamping and spreading without tools, or configure the clamp for overlap clamping and guide rail fixing. Protective plastic contact caps help provide a secure hold while protecting the contact surface.

One clamp design, several working arrangements

The FS-EZ 150/2 combines general workholding with Festool system compatibility. Use the appropriate configuration for the task and check that all removable sections are correctly engaged before applying pressure.

Product Highlights

  • One-handed operation: Pump lever for tightening and integrated lever for release.
  • Three functions: Clamping, overlap clamping and spreading.
  • Tool-free conversion: Reconfigure the clamp to suit the application.
  • 150 mm capacity: Maximum specified clamping width.
  • 120–310 mm spreading range: Useful for controlled outward pressure.
  • Pair supplied: Two clamps in the pack.

Product Compatibility

  • Festool FS/2: For securing compatible guide rails.
  • Festool FS/2-KP: For the rail’s clamping groove.
  • Festool FSK: For securing compatible cross-cutting guide rails.
  • Festool MFT/3: Suitable for the designated side clamping groove.
  • Festool mobile workshop: For compatible clamping grooves.
Capacity note: Check the complete clamping arrangement before use. Rail thickness, contact position and available clearance affect the workpiece thickness that can be accommodated.

Features

  • Ergonomic handle: Pump-action tightening with accessible release control.
  • Reversible arrangement: Top section can be changed for spreading.
  • Protective contact caps: Plastic surfaces help protect the workpiece.
  • System attachment: Fits the specified Festool rail and table grooves.

Benefits

  • Easier positioning: Hold the rail or component with one hand while tightening with the other.
  • Versatile workholding: Handle several tasks with the same clamp pair.
  • Convenient changes: Release and reposition between operations.
  • Controlled setup: Secure the assembly before machining.

Application

  • Fixing guide rails to suitable workpieces.
  • Securing compatible FSK cross-cutting rails.
  • Holding components using an MFT side groove.
  • General clamping and overlap clamping.
  • Spreading within the specified range.

Extra Information

  • Model: FS-EZ 150/2.
  • Festool article number: 578623.
  • Vermont Sales code: FES578623.
  • Quantity: 2 clamps.

Check the Tool Path

Before switching on a saw or router, move it through the intended travel with power disconnected. Confirm that the clamps do not obstruct the tool, blade, cutter, hose or cable.

Protect Finished Surfaces

Keep contact caps clean. Use suitable protective packing on delicate finishes and apply only the pressure needed to hold the assembly securely.

Pro Tips

  • Position both clamps before fully tightening either one.
  • Recheck rail alignment after clamping.
  • Keep clamping faces square to the supported surfaces.
  • Remove chips and adhesive residue from contact areas.

How to Use

  • Select the clamping, overlap or spreading configuration required.
  • Make any configuration changes without load and check engagement.
  • Position the clamp in the compatible groove or against the workpiece.
  • Adjust the opening, then operate the pump lever to apply pressure.
  • Check alignment, stability and tool clearance before working.
  • Support the workpiece before operating the release lever.

Safety

  • Keep fingers clear of moving jaws and pinch points.
  • Check engagement and secure holding before machining.
  • Do not use clamps for lifting or supporting suspended loads.
  • Release pressure before changing the configuration.
  • Do not use damaged clamps or extend the handle to increase leverage.

Specifications

Description Spec
BrandFestool
Product DescriptionMultifunctional one-handed clamp set
Cat No.FES578623
Festool Article Number578623
ModelFS-EZ 150/2
Maximum Clamping Width150 mm
Spreading Range120–310 mm
FunctionsClamping, overlap clamping and spreading
OperationOne-handed pump lever with integrated release
ConversionTool-free
Specified CompatibilityFS/2, FS/2-KP, FSK, MFT and compatible mobile workshop grooves
Pack Quantity2 clamps

Scope of Delivery:

  • 2 × Festool FS-EZ 150 one-handed clamps.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy