Menu
Your Cart

Festool HW R2-OFK 500 Z1 Roundover Cutter 2 mm Radius for OFK 500 and OFKC 500

Festool HW R2-OFK 500 Z1 Roundover Cutter 2 mm Radius for OFK 500 and OFKC 500
Festool HW R2-OFK 500 Z1 Roundover Cutter 2 mm Radius for OFK 500 and OFKC 500
Festool HW R2-OFK 500 Z1 Roundover Cutter 2 mm Radius for OFK 500 and OFKC 500
Festool HW R2-OFK 500 Z1 Roundover Cutter 2 mm Radius for OFK 500 and OFKC 500
Festool HW R2-OFK 500 Z1 Roundover Cutter 2 mm Radius for OFK 500 and OFKC 500
Festool HW R2-OFK 500 Z1 Roundover Cutter 2 mm Radius for OFK 500 and OFKC 500
Festool HW R2-OFK 500 Z1 Roundover Cutter 2 mm Radius for OFK 500 and OFKC 500
  • Brand: FESTOOL
  • Model: FES578377
  • UPC: 4014549451182
Price:
R 2,135.55
Ex VAT: R 1,857.00

Available Options

Festool Roundover Cutter HW R2-OFK 500 Z1

At a Glance: Single-edge carbide roundover cutter with a 2 mm radius and 27 mm diameter. Direct spindle mounting for Festool OFK 500 and OFKC 500 edge routers. Guide bearing sold separately.

Give exposed edges a subtle, comfortable finish with the Festool HW R2-OFK 500 Z1 roundover cutter. Its small 2 mm radius softens sharp corners while preserving a restrained edge detail, making it useful for furniture components, solid-wood edging and suitable plastic edges. The single cutting edge is designed to limit heat build-up and reduce the tendency to leave scorch marks when working across the grain.

The dedicated hollow-core cutter mounts directly onto the router spindle for accurate running. A 5° run-out at the transition from the radius helps protect the adjoining surface, while the low-profile bearing arrangement supports work in rebates and on stacked panels where the setup permits. This cutter is supplied without a guide bearing; use the compatible bearing required for your machine and application.

R2 Edge Finishing with a Dedicated Direct-Mount Cutter

The R2 profile creates a nominal 2 mm rounded edge. Unlike a conventional shank-mounted router bit, this cutter uses the specialised spindle mounting system of the OFK 500 and OFKC 500.

Product Highlights

  • Small 2 mm radius: Produces a discreet roundover on suitable edges.
  • Single cutting edge: Z1 geometry helps reduce heat build-up during routing.
  • Direct spindle mounting: Dedicated hollow-core design supports accurate cutter running.
  • 5° run-out: The profile transition helps protect the adjacent workpiece surface.
  • Low mounting height: The flush bearing arrangement assists access in suitable restricted edge-routing setups.
  • Carbide cutting material: HW cutting edge for the intended solid-wood and plastic-edge applications.

Product Compatibility

  • Festool OFK 500: Designed for the machine’s dedicated cutter mounting system.
  • Festool OFKC 500: Compatible with the cordless edge router.
  • Guide bearing: Compatible with Festool KLS-D 15,8-OFK, article 490249, available separately.
  • Material applications: Solid-wood edges and suitable plastic edging.

Important compatibility note: This is a dedicated direct-mount cutter for OFK 500 and OFKC 500 edge routers. It is supplied without a guide bearing and is not a conventional 8 mm or 1/4-inch shank router bit.

Features

  • R2 cutting profile: Nominal rounding radius of 2 mm.
  • 27 mm cutter diameter: Dedicated dimensions for the specified edge routers.
  • Z1 configuration: One carbide cutting edge.
  • Hollow-core mounting: Fits directly onto the compatible router spindle.
  • Screw fastening: Secured using the machine’s prescribed mounting arrangement.
  • Surface-protecting transition: Radius blends into a 5° run-out.

Benefits

  • More comfortable edges: Softens corners on components that are handled regularly.
  • Consistent detailing: Reproduce a matching small-radius profile across furniture parts.
  • Reduced scorching tendency: Single-edge geometry helps control heat, particularly across the grain.
  • Accurate mounting: The dedicated spindle interface supports a precise routing setup.
  • Useful access: The compact bearing arrangement can help when routing suitable rebates or stacked components.

Application

  • Rounding exposed solid-wood edges.
  • Finishing suitable plastic edging.
  • Creating small-radius details on furniture and cabinet components.
  • Softening sharp corners while retaining a subtle edge profile.
  • Edge routing in suitable rebates and on stacked panels with the correct setup.

Extra Information

  • Vermont Sales product code: FES578377.
  • Festool article number: 578377.
  • Model designation: HW R2-OFK 500 Z1.
  • Z1 designation: Identifies the single cutting edge.
  • Bearing requirement: Check the condition and compatibility of the existing bearing or order the appropriate replacement separately.

Radius and Cutter Diameter

The 2 mm radius describes the curved profile produced on the edge. The 27 mm diameter describes the cutter itself. These are separate dimensions and should not be confused when selecting the required edge finish.

Preparing the Reference Surface

Clean the surface followed by the guide bearing and remove glue residue or loose material. Irregularities in the reference surface can affect the consistency of the finished edge.

Setting the Finished Profile

Adjust the router carefully and make a trial cut on matching scrap. Correct positioning helps the roundover blend neatly into the adjoining face without leaving an unwanted shoulder.

Pro Tips

  • Test the profile on an offcut with the same material and edging.
  • Check that the guide bearing rotates freely before starting.
  • Keep the router supported evenly throughout the cut.
  • Maintain a steady feed and avoid pausing with the cutter engaged.
  • Inspect the cutting edge if burning or increased cutting resistance develops.

How to Use

  • Disconnect the OFK 500 from mains power or remove the OFKC 500 battery before changing the cutter.
  • Inspect and clean the spindle mounting surfaces according to the router instructions.
  • Install the cutter and compatible guide bearing using the prescribed fastening procedure.
  • Secure the workpiece and check that the router has continuous support along the intended edge.
  • Set the cutter position for the required roundover and connect suitable dust extraction.
  • Make a trial cut on matching scrap and inspect the transition between the radius and adjoining surface.
  • Route the finished component using the feed direction and operating method specified for the machine.
  • Allow the cutter to stop completely before setting the router down or making adjustments.

Safety

  • Read and follow the cutter and edge router operating instructions.
  • Disconnect mains power or remove the battery before fitting, removing or adjusting the cutter.
  • Wear suitable eye, hearing and respiratory protection and use appropriate extraction.
  • Observe the operating-speed limits and mounting requirements specified for the cutter and machine.
  • Use only an undamaged cutter with secure fastening and the correct guiding arrangement.
  • Clamp the workpiece and keep hands clear of the cutting area.
  • Check the material for nails, screws and other foreign objects.
  • Wait until the cutter has stopped before handling the work area or putting the router down.

Specifications

Description Spec
BrandFestool
Product Description:Edge router roundover cutter
Cat No.FES578377
Festool Article Number578377
ModelHW R2-OFK 500 Z1
Cutting MaterialCarbide (HW)
Cutter Diameter (D)27 mm
Rounding Radius (R)2 mm
Number of Cutting Edges1 (Z1)
Profile Run-Out5°
Mounting TypeDedicated direct spindle mounting with screw fastening
Compatible RoutersFestool OFK 500 and OFKC 500
Compatible Guide BearingKLS-D 15,8-OFK, article 490249
Guide Bearing IncludedNo
Material ApplicationsSolid wood and suitable plastic edging
Pack Quantity1 cutter

Scope of Delivery:

  • 1 × Festool roundover cutter HW R2-OFK 500 Z1.

Scope of delivery note: Cutter supplied without a guide bearing. Router, guide bearing, extraction equipment and workpiece are not included.

Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy