Festool Mx - A Dust Extraction Attachment For Mx Stirrers 27/36mm
Available Options
Festool MX - A Dust Extraction Attachment for MX Stirrers 27/36mm
At a Glance: Genuine Festool MX - A dust extraction attachment designed to capture airborne dust directly at the mixing bucket when pouring and stirring powdered building materials. Features a convenient bucket-rim clamping system, 27mm and 36mm dust extraction hose compatibility and a practical design that fits most conventional mixing buckets. Suitable for use with Festool MX stirrers and compatible CTL/CTM 26, 36 and 48 mobile dust extractors.
Professional mixing should not mean working in a cloud of dust! The Festool MX - A Dust Extraction Attachment brings effective dust control directly to the mixing bucket, helping to create a cleaner, healthier and more productive working environment when preparing powdered construction materials.
Whether mixing tile adhesive, plaster, levelling compounds, fillers or other powdered building materials, one of the dustiest stages of the process occurs before the actual mixing begins. As dry powder is poured from a bag into a mixing bucket, fine particles can become airborne, spreading throughout the surrounding workspace and creating unnecessary dust exposure.
The Festool MX - A addresses this problem with a simple but highly effective solution. The attachment clips directly onto the rim of the mixing bucket and connects to a compatible Festool mobile dust extractor using a 27mm or 36mm extraction hose. Once the extractor is running, airborne dust generated during filling is captured close to its source, before it can spread throughout the working area.
Dust extraction continues during the stirring process, helping to control airborne particles that may be released as the powder and liquid combine. This makes the MX - A particularly useful for professional tilers, plasterers, painters, flooring installers, drywall contractors and renovation specialists who regularly prepare powdered materials on site.
One of the greatest advantages of the MX - A is its simplicity. There are no complicated installation procedures or permanent modifications to the mixing bucket. Simply position the attachment on a suitable bucket rim, secure it, connect the extraction hose and switch on the dust extractor before adding the powdered material.
The attachment is designed to fit most conventional mixing buckets, offering excellent flexibility when working with different products and mixing quantities. Because the extraction unit remains attached to the bucket rather than the stirrer itself, it provides a practical dust collection point without requiring a special mixing paddle.
By reducing airborne dust at the source, the Festool MX - A helps improve working conditions, minimise dust deposits on nearby surfaces and reduce the time spent cleaning the work area after mixing. It is a small accessory that can make a significant difference to everyday site efficiency.
Dust Control Begins Before Mixing
The Festool MX - A is specifically developed to reduce dust exposure during the preparation of powdered building materials. Instead of waiting until dust has spread throughout the workspace, the attachment captures airborne particles close to the point where they are generated.
Its bucket-mounted extraction arrangement is particularly effective during the initial filling process, when dry powder is poured into a mixing container. Connected to a suitable Festool dust extractor, the attachment draws airborne material away from the operator and into the extractor's filtration system.
Dust extraction can remain active during stirring, helping to control additional airborne particles and maintain a cleaner working environment.
The result: Less airborne dust, reduced contamination of surrounding surfaces, improved working conditions and less time spent cleaning up after the job.
Product Highlights
- Dust Extraction at the Source: Captures airborne particles directly at the mixing bucket during the pouring and stirring of powdered materials.
- Effective During Filling: Begins extracting dust as soon as dry material is poured into the bucket, helping to prevent large dust clouds from forming.
- Simple Bucket-Rim Attachment: Clips onto the edge of a suitable mixing bucket without requiring complicated installation or permanent modifications.
- 27mm and 36mm Hose Connections: Designed for compatible Festool extraction hoses with nominal diameters of 27mm and 36mm.
- Compatible with Festool MX Stirrers: Developed to complement the Festool MX mixing system.
- Fits Most Mixing Buckets: Practical attachment design accommodates most conventional buckets with suitable rim profiles.
- Cleaner Working Conditions: Helps reduce airborne dust and deposits on surrounding floors, walls, tools and equipment.
- Reduced Cleaning Time: Capturing dust during material preparation helps minimise additional cleaning work after mixing.
- Improved Dust Management: Supports safer working practices when used with a correctly selected dust extractor and appropriate protective equipment.
- Convenient and Portable: Easily transferred between suitable mixing buckets and different work locations.
- Original Festool Accessory: Designed as part of Festool's professional stirring and dust extraction system.
Product Compatibility
The Festool MX - A, manufacturer part number 576759, is designed for use with Festool MX stirrers and compatible Festool mobile dust extractors.
Compatible Festool Stirrer Series
- Festool MX 1000: Suitable for dust-controlled preparation of powdered building materials using compatible MX 1000 stirrers.
- Festool MX 1200: Complements the MX 1200 mixing system when preparing dusty construction materials.
- Festool MX 1600: Suitable for use alongside compatible MX 1600 stirrers during larger or more demanding mixing operations.
- Festool MX Stirrer Family: Festool specifies the MX - A attachment for all MX stirrers.
Compatible Festool Mobile Dust Extractors
- Festool CTL 26 / CTM 26: Compatible dust extraction systems with appropriate extraction hoses.
- Festool CTL 36 / CTM 36: Compatible mobile dust extractors for professional mixing applications.
- Festool CTL 48 / CTM 48: Compatible higher-capacity mobile dust extraction systems.
Dust Extraction Hose Compatibility
- 27mm Extraction Hose: Compatible with suitable Festool D 27 hose connections.
- 36mm Extraction Hose: Compatible with suitable Festool D 36 hose connections.
Compatibility Note
The MX - A attaches to the mixing bucket, not directly to the stirrer motor or mixing paddle. It can therefore be used alongside different Festool MX stirrers without needing a dedicated mounting point on the machine.
The attachment is designed to fit most conventional mixing buckets. Bucket rim shape, thickness and construction can influence compatibility. Check that the attachment can be mounted securely before use.
The dust extractor and extraction hose are required for operation and are supplied separately.
Features
- Bucket-Mounted Dust Extraction: Positions the extraction inlet directly at the mixing container to capture airborne dust close to its source.
- Clip-On Mounting System: Attaches to the rim of most suitable mixing buckets without tools or permanent modifications.
- Dual Hose Diameter Compatibility: Accommodates compatible 27mm and 36mm dust extraction hose connections.
- Continuous Dust Collection: Can remain connected and operating during both material filling and stirring.
- Independent Bucket Attachment: Mounts to the bucket rather than the mixing machine, allowing the stirrer to operate separately.
- Quick Installation: Simply clip the accessory onto the bucket, connect the hose and start the extractor.
- Versatile Bucket Compatibility: Designed to fit most conventional mixing buckets with suitable rim profiles.
- Integrated Festool System: Designed for use with Festool MX stirrers and compatible mobile dust extractors.
- Portable Accessory: Convenient for professional use across different work areas and construction sites.
- Original Manufacturer Design: Genuine Festool part number 576759.
Benefits
- Reduced Airborne Dust: Helps capture dust before it spreads throughout the working environment.
- Improved Respiratory Protection Measures: Source extraction helps reduce dust exposure when combined with appropriate respiratory protection and safe working practices.
- Cleaner Workspaces: Less airborne dust means fewer deposits on nearby surfaces, equipment and completed finishes.
- Reduced Cleaning Requirements: Minimising dust at the source can significantly reduce post-mixing cleaning work.
- Improved Site Efficiency: Quick attachment and convenient operation help keep material preparation moving.
- Reduced Dust During Pouring: Particularly valuable when emptying bags of fine powdered materials into mixing buckets.
- Flexible Mixing Arrangements: Can be transferred between suitable mixing buckets without requiring special proprietary containers.
- Convenient Integration: Works with compatible Festool extraction systems already used for other workshop and construction applications.
- Improved Working Visibility: Reduced airborne dust can make the mixing area easier to see and work around.
- Professional Dust Management: Supports cleaner and more controlled preparation of powdered construction materials.
Application
- Dust extraction when pouring powdered fillers into mixing buckets.
- Preparing gypsum plaster and suitable plastering compounds.
- Mixing tile adhesives and cement-based bonding compounds.
- Preparing suitable self-levelling floor compounds.
- Mixing floor screed materials and smoothing compounds.
- Preparing joint fillers and patching compounds.
- Dust control during the preparation of powdered renovation materials.
- Professional tiling and flooring installation.
- Plastering and interior finishing applications.
- Painting and decorating preparation involving powdered fillers.
- Drywall installation and finishing work.
- General construction and renovation site mixing operations.
Extra Information
- What is the Festool MX - A? It is a bucket-mounted dust extraction attachment designed to capture airborne dust while pouring and stirring powdered building materials.
- How does the MX - A work? The attachment clips onto the rim of a mixing bucket and connects to a compatible dust extractor. The extractor creates airflow through the attachment, drawing airborne dust away from the mixing area.
- When should extraction begin? Switch on the dust extractor before pouring the powdered material into the bucket. This allows dust capture to begin at the earliest and often dustiest stage of the mixing process.
- Does it extract dust during stirring? Yes. The attachment can remain mounted and connected while the material is being mixed, helping to capture additional airborne dust.
- Does the MX - A fit all buckets? Festool specifies that it fits most mixing buckets. Compatibility depends on the bucket's rim dimensions and shape.
- Does it attach directly to the stirrer? No. The accessory attaches to the mixing bucket, providing a stationary extraction point while the stirrer operates inside the container.
- What hose sizes are supported? The manufacturer specifies a dust extraction connection diameter of 36 / 27mm.
- Is the dust extractor included? No. A compatible Festool mobile dust extractor is required and is supplied separately.
- Does it work with dry powdered materials? Yes. Its principal purpose is to control dust generated while pouring and mixing dry powdered products such as fillers and levelling compounds.
- Can it be used with cement-based materials? It can assist with dust control during suitable cement-based mixing applications, provided the correct extractor, filter classification and protective equipment are used.
- Can the attachment replace respiratory protection? No. Although source extraction can substantially reduce dust exposure, suitable respiratory protection may still be required depending on the material and working conditions.
- Is the MX - A a standalone vacuum cleaner? No. It is a dust collection attachment that requires connection to a suitable mobile dust extractor.
- Will it eliminate all dust? No. Its purpose is to reduce airborne dust by capturing it close to the source. Actual performance depends on extraction airflow, bucket arrangement, material type and correct operation.
- Can it be used without a Festool stirrer? The attachment mounts to the bucket independently. However, the manufacturer's specified system compatibility is with Festool MX stirrers and compatible mobile dust extractors.
- Can the attachment be used for wet vacuuming? It is designed for collecting airborne dust during mixing, not for extracting liquid directly from the bucket. Avoid drawing wet mixture into the attachment or extraction hose.
- What does MX - A mean? MX identifies the Festool mixing system, while MX - A is the manufacturer's model designation for this dust extraction accessory.
Why Does Mixing Powdered Material Produce So Much Dust?
Construction powders consist of fine particles that can become airborne when disturbed. When a bag of dry material is emptied into a bucket, displaced air and the movement of powder can release visible dust clouds and much finer particles that remain suspended in the air.
Stirring can also release additional dust, particularly during the initial mixing stage before the dry ingredients are fully incorporated into the liquid.
Depending on the material, airborne dust may contain substances that present respiratory hazards. Controlling dust close to its source is therefore an important part of professional material preparation.
What Is Source Extraction?
Source extraction means capturing dust, fumes or airborne particles as close as practical to the point where they are generated.
Rather than allowing dust to disperse throughout the working area before attempting to remove it, the Festool MX - A positions the extraction point directly at the mixing bucket.
This approach can improve dust collection effectiveness while helping to reduce contamination of the surrounding workspace.
Why Is Dust Extraction During Pouring So Important?
The initial filling stage can produce substantial dust because fine powder is released from the bag before it becomes incorporated into the mixing liquid.
By starting the dust extractor before pouring begins, the MX - A can capture airborne particles as they are generated, helping to prevent dust clouds from spreading into the surrounding environment.
This is particularly beneficial when working indoors, in enclosed spaces or near completed surfaces that need to remain clean.
Understanding the 27mm and 36mm Connections
The Festool MX - A has a dust extraction connection specified for compatible 27mm and 36mm hoses.
Both sizes allow connection to suitable Festool extraction equipment. The 36mm hose generally provides a larger internal passage for airflow than a 27mm hose, which may be advantageous in demanding dust collection applications.
The effectiveness of the complete system also depends on the extractor's airflow performance, filter condition, hose length and the amount of dust being generated.
Choosing the Correct Dust Extractor
Different building materials generate different types and levels of hazardous dust. The dust extractor must be selected according to the hazards associated with the material being mixed.
Festool offers mobile dust extractors with different dust classifications. The appropriate extractor and filtration system must be chosen according to the applicable safety requirements and the material manufacturer's safety data sheet.
For materials containing respirable crystalline silica or other hazardous substances, additional exposure controls may be required.
A Practical Addition to the Festool Mixing System
Festool's MX stirrers are designed for professional preparation of building materials, including fillers, plaster, adhesives and levelling compounds.
Adding the MX - A dust extraction attachment helps extend this system by addressing dust generated during preparation and mixing.
The MX - A does not change the mixing performance of the stirrer. Instead, it provides an additional dust management function, allowing the operator to focus on achieving the correct mixture while helping maintain cleaner working conditions.
Pro Tips
- Start Extraction Before Pouring: Switch on the mobile dust extractor before opening and emptying the powder bag. This helps capture airborne dust from the beginning of the filling process.
- Position the Attachment Correctly: Secure the MX - A firmly to the bucket rim and position the extraction opening where dust is most likely to be generated, without obstructing the mixing paddle.
- Pour Slowly and Steadily: Empty powdered materials into the bucket gradually rather than tipping the entire bag in at once. Controlled pouring can significantly reduce dust generation.
- Keep the Extraction Hose Clear: Ensure that the hose is not kinked, crushed or obstructed, as restrictions can reduce extraction performance.
- Use a Suitable Mixing Bucket: Choose a stable bucket with a rim that allows the attachment to clamp securely. Avoid damaged or excessively flexible containers.
- Monitor Filter Performance: Fine construction dust can accumulate rapidly in extraction filters. Check the extractor's airflow and maintain its filter system according to the manufacturer's instructions.
- Choose the Correct Dust Class: Check the safety data sheet of the material being mixed and select an extractor appropriate for the dust hazard.
- Keep Extraction Running During Initial Mixing: Continue extracting while the dry ingredients are being incorporated into the liquid, as this is often another dust-producing stage.
- Protect Finished Surfaces: When working in occupied buildings or areas with completed finishes, source extraction helps minimise the spread of dust onto nearby surfaces.
- Inspect the Attachment Regularly: Remove accumulated dry residue from the attachment and check that the bucket clamp and hose connection remain in good condition.
- Avoid Wet Material Entering the Hose: Position the extraction inlet so that the rotating paddle or splashing mixture cannot force wet material into the attachment.
How to Use
- Prepare the Work Area: Select a stable, level working surface and position the mixing bucket securely. Ensure adequate ventilation and appropriate personal protective equipment.
- Check the Bucket: Confirm that the bucket rim is suitable for the MX - A clamping system and is free from damage or excessive material build-up.
- Attach the MX - A: Clip the dust extraction attachment securely onto the rim of the mixing bucket.
- Position the Extraction Opening: Orientate the attachment so that airborne dust can be drawn towards the inlet without interfering with the mixing paddle.
- Connect the Extraction Hose: Attach a compatible 27mm or 36mm Festool extraction hose to the MX - A connection.
- Connect the Dust Extractor: Ensure the hose is connected to a suitable Festool mobile dust extractor with the correct filtration system for the material being handled.
- Switch On Extraction: Start the dust extractor before adding powdered material to the bucket.
- Add the Mixing Liquid: Follow the building material manufacturer's instructions regarding the correct liquid quantity and mixing sequence.
- Pour the Powder Gradually: Introduce the powdered material into the bucket in a controlled manner, allowing the MX - A to capture airborne dust generated during pouring.
- Begin Mixing: Operate the Festool MX stirrer according to its instructions, ensuring that the rotating paddle does not contact the extraction attachment or hose.
- Maintain Extraction: Keep the dust extractor operating during the dust-producing stages of the mixing process.
- Complete the Mixing Process: Follow the material manufacturer's required mixing time, consistency and resting or remixing procedures.
- Switch Off and Disconnect: Once airborne dust has been captured and the mixing operation is complete, switch off the stirrer and extractor before removing the attachment.
- Clean and Store: Remove accumulated residue from the attachment and store it in a clean, dry location ready for the next job.
Read the Operating Instructions
Before using the MX - A, consult the Festool operating instructions for the dust extraction attachment, the compatible mobile dust extractor and the mixing machine.
Always follow the safety data sheet and mixing instructions supplied by the manufacturer of the material being prepared.
Safety
- Wear appropriate safety glasses, respiratory protection, protective gloves and hearing protection according to the material and equipment being used.
- Use a mobile dust extractor with the correct dust classification and filtration system for the material being mixed.
- Always consult the material manufacturer's safety data sheet before handling powdered construction products.
- Some cement-based products, mortars and levelling compounds may contain respirable crystalline silica or other hazardous substances. Apply the required dust exposure controls.
- Do not assume that using the MX - A completely eliminates airborne dust or the need for respiratory protection.
- Ensure the extraction attachment is securely clamped to a suitable bucket before starting the mixing operation.
- Check that the hose connection is secure and that the extraction hose cannot become entangled with the rotating mixing paddle.
- Keep the extraction attachment and hose clear of moving machine components.
- Never place hands or tools near the rotating mixing paddle while the stirrer is operating.
- Do not use damaged buckets or unstable containers that may tip or move during mixing.
- Check the dust extractor's airflow and filter condition regularly to maintain effective extraction.
- Do not allow wet mortar, plaster, adhesive or other liquid mixtures to enter the dust extraction attachment or hose.
- When mixing materials that contain cement or other alkaline substances, use appropriate skin and eye protection to prevent chemical irritation or burns.
- Do not use the attachment to collect flammable, explosive or otherwise prohibited dusts unless the complete extraction system is specifically approved for the hazard.
- Keep the work area adequately ventilated and ensure that bystanders are protected from airborne dust.
- Switch off the stirrer and dust extractor before adjusting, cleaning or removing the attachment.
- Dispose of collected dust and used filter materials in accordance with the material manufacturer's instructions and applicable regulations.
- Always follow the Festool operating instructions for the MX - A, the mixing machine and the dust extractor.
Important Dust Exposure Warning
Mixing powdered building materials can generate hazardous airborne dust, including respirable particles that may not be visible.
The Festool MX - A is a dust reduction accessory, not a substitute for correct respiratory protection, suitable dust extraction equipment or safe material-handling procedures.
Always use the correct dust extractor classification and personal protective equipment for the material being handled.
Specifications
| Description | Spec |
|---|---|
| Brand | Festool |
| Cat No. | FES576759 |
| Manufacturer Part Number | 576759 |
| Product Name | Dust Extraction |
| Model | MX - A |
| Product Type | Dust Extraction Attachment |
| Accessory Category | Stirring Accessories - Dust Extraction |
| Primary Application | Dust Extraction During Filling and Mixing |
| Dust Extraction Connection Diameter | 36 / 27mm |
| Compatible Hose Sizes | 27mm and 36mm |
| Mounting System | Bucket-Rim Clamp |
| Mounting Position | Mixing Bucket Rim |
| Bucket Compatibility | Most Conventional Mixing Buckets |
| Compatible Stirrer Series | Festool MX Stirrers |
| Compatible Dust Extractor Series | Festool CTL / CTM |
| Compatible Dust Extractor Sizes | 26 / 36 / 48 |
| Suitable Material Form | Powdered Building Materials |
| Typical Applications | Fillers, Plaster, Tile Adhesives and Levelling Compounds |
| Extraction Stage | Material Pouring and Stirring |
| Dust Extractor Required | Yes - Supplied Separately |
| Extraction Hose Required | Yes - Supplied Separately |
| Accessory Origin | Original Festool Accessory |
| Quantity per Pack | 1 |
| EAN / Barcode | 4014549377574 |
Scope of Delivery:
- 1 x Festool MX - A Dust Extraction Attachment.
Scope of Delivery Note
The MX - A is supplied as a dust extraction attachment only.
The Festool MX stirrer, mixing bucket, mobile dust extractor, extraction hose, mixing paddle and other accessories are not included.
A compatible dust extractor and suitable 27mm or 36mm hose are required for dust extraction operation.