Festool AP-KA 65 Adapter Plate for KA 65 CONTURO edge bander

PACK SIZE

The price displayed for this product is the unit price of the product. Where a PACK SIZE is indicated, this refers to the recommended ordering quantity and is also indicative of how many of these products are packaged in a box.

Model: FES500175
Weight: 4.75kg
Pack Dim: 470.00mm x 300.00mm x 210.00mm
UPC: 4014549213773

FESTOOL

Price:

R 13,522.85

Ex VAT: R 11,759.00

Available Options

Stockist

Festool AP-KA 65 Adapter Plate

At a Glance: Adapter plate for using the Festool KA 65 CONTURO edge bander as a stationary bench-mounted machine, with 0 - 47° angle adjustment.

The Festool AP-KA 65 adapter plate is designed to convert the KA 65 CONTURO edge bander into a practical stationary edging setup. It allows the KA 65 to be installed in an MFT/3 multifunction table with the correct KA 65 perforated board, or into a suitable self-built workbench. This gives the user better control when applying edging to straight edges, curves, small free-form parts and inclined edges. With adjustable angle positioning, secure machine fixing and supplied workpiece guides, the AP-KA 65 is a clever accessory for more comfortable and repeatable edge banding work.

Stationary edge banding setup for the KA 65 CONTURO

The AP-KA 65 is ideal when handheld edging becomes awkward, especially with smaller parts, curved workpieces or angled edging. By mounting the CONTURO into the bench, the workpiece can be guided horizontally across the machine for safer, more controlled and more consistent edging.

Product highlights

For KA 65 CONTURO: Designed for using the Festool KA 65 edge bander as a bench-mounted machine.
Stationary edging: Allows the machine to be mounted into an MFT/3 setup or suitable self-built workbench.
0 - 47° angle adjustment: Supports edging of straight, curved and inclined edges.
Comfortable workpiece guidance: Allows the user to guide the workpiece horizontally, which is especially helpful with larger or awkward parts.
Tool-free machine removal: The edge bander can be installed and removed quickly without tools.
Secure machine fixing: Slide lock helps hold the KA 65 securely in the stationary unit.
Guides included: Supplied sliding guides help guide the workpiece safely and accurately.
Additional roller support: Roller support expands the pressure zone and helps with complex shapes.

Extra Information

This adapter plate is designed for the Festool KA 65 CONTURO edge bander.
It is an accessory and does not include the KA 65 edge bander itself.
The AP-KA 65 can be installed in the MFT/3 when used with the KA 65 perforated board, or in a suitable self-built workbench.
The stationary setup is useful when the workpiece is easier to guide than the machine.
The adjustable angle system uses clamping screws and locking positions to help set common angles quickly.
For best results, make sure the workbench or MFT setup is stable, level and correctly prepared before installation.

Pro Tips

Use the AP-KA 65 when edging smaller workpieces or curved parts that are awkward to clamp for handheld edging.
Set the angle carefully before applying edging to mitred or inclined edges.
Use the supplied sliding guides to keep the workpiece running cleanly and consistently through the edging process.
Test the setup on a scrap piece before working on the final panel, especially when edging at an angle.
Keep the adapter plate, guides and rollers clean so the workpiece moves smoothly during edging.

How to Use

Confirm that the adapter plate is being used with a compatible Festool KA 65 CONTURO edge bander.
Install the AP-KA 65 into the correct MFT/3 KA 65 perforated board or a suitable self-built workbench.
Insert the KA 65 into the adapter plate and secure it with the slide lock.
Set the required edging angle using the angle adjustment system.
Fit and adjust the supplied guides and roller support according to the workpiece and edging task.
Prepare the edging material and adhesive system according to the KA 65 operating instructions.
Switch on the machine and guide the workpiece steadily across the stationary edge bander.
Maintain even pressure and smooth feed movement for a clean glued joint.
Allow the edging and adhesive to settle before trimming or finishing the edge.
Switch off the machine and clean the adapter plate, guides and roller area after use.

Features

Adapter plate design: Converts the KA 65 CONTURO edge bander into a stationary bench-mounted edging setup.
Flexible installation: Can be installed into an MFT/3 with the correct KA 65 perforated board or into a suitable self-built table.
Continuously adjustable angle: Angle adjustment from 0 - 47° for angled edging applications.
Sliding guides: Helps guide the workpiece safely and assists with correct edging overhang.
Guide rail adapter: Helps feed panels parallel when edging mitres, reducing the chance of the edge running off course.
Deflector: Keeps the introduced edging away from the workpiece area during operation.
Machine access: The KA 65 start button remains easy to reach when mounted in the plate.
Additional roller: Expands the pressure zone and supports edging of more complex shapes.

Benefits

Better control: The stationary setup lets the user guide the workpiece instead of guiding the machine by hand.
More accurate edging: Guides and roller support help keep the workpiece moving cleanly for a better glued joint.
Useful for small batches: Ideal for repeat edging work on straight components and smaller production runs.
Safer handling of small parts: Small free-form elements that are difficult to clamp can be guided more easily on the bench setup.
More versatile edging: The adjustable angle range allows inclined edging work up to 47°.

Application

Using the KA 65 CONTURO as a bench-mounted machine
Stationary edge banding work
Small series edging with straight edges
Edging small free-form elements that are difficult to clamp
Gluing inclined edges up to 47°
Applying edging to curves and shaped workpieces
Workshop, cabinetry, furniture and panel edging applications

Safety

Wear eye protection and suitable workshop safety gear when using the KA 65 and AP-KA 65 setup.
Always read and follow the manufacturer’s operating and safety instructions for both the KA 65 and the AP-KA 65 adapter plate.
Make sure the adapter plate is securely installed in the MFT/3 or workbench before mounting the machine.
Check that the KA 65 is properly locked into the adapter plate before use.
Keep hands clear of the edging feed area, rollers and moving parts during operation.
Allow hot adhesive and freshly applied edging to cool before trimming or handling aggressively.
Ensure the workpiece is stable and guided smoothly through the machine.
Do not use the setup if the adapter plate, guides, rollers or machine fixing system is damaged or loose.
Disconnect the machine from the power supply before adjusting, cleaning or removing it from the adapter plate.

Specifications

Description	Spec
Brand	Festool
Cat No.	FES500175
Festool Product No.	500175
Product Type	Adapter Plate / Edge Bander Accessory
Model	AP-KA 65
Suitable For	KA 65 CONTURO
Main Use	Bench-mounted use of the KA 65 edge bander
Dimensions Length x Width	254 x 420 mm
Minimum Installation Height	150.00 mm
Cutting Angle Adjustment	0 - 47°
Installation Options	MFT/3 with KA 65 perforated board or suitable self-built workbench
Machine Fixing	Slide lock
Workpiece Guidance	Sliding guides, guide rail adapter and additional roller support