Menu
Your Cart

Festool A-SYS-KS 60 Elevation Feet Set for KAPEX KS 60 and KSC 60

Festool A-SYS-KS 60 Elevation Feet Set for KAPEX KS 60 and KSC 60
Festool A-SYS-KS 60 Elevation Feet Set for KAPEX KS 60 and KSC 60
  • Brand: FESTOOL
  • Model: FES500121
  • Weight: 0.33kg
  • Dim: 200 mm x 80 mm x 80 mm
  • UPC: 4014549212196
Price:
R 1,669.23
Ex VAT: R 1,451.50

Available Options

Festool A-SYS-KS 60 Elevation Feet Set

At a Glance: Raises the saw table to SYS 1 Systainer height | Non-slip rubber feet | Extended front support bolt | For KS 60 and KSC 60

Make long workpieces easier to support with the Festool A-SYS-KS 60 elevation feet set. These intermediate feet raise the KAPEX saw table to match the height of a SYS 1 T-LOC or Classic Systainer, allowing a suitable case positioned alongside the saw to support longer material. It is a practical arrangement for installation and assembly work where a compact setup is valuable. Non-slip rubber feet help the machine stand securely, while an extended support bolt helps resist tipping towards the front. The set can be retrofitted to compatible saws or used to replace missing components.

Saw and Workpiece Support at a Matching Height

A well-supported workpiece is easier to position consistently against the saw fence. Matching the table and adjacent support height helps prevent long material from drooping beyond the saw, simplifying preparation for repeated cuts.

Product Highlights

  • Systainer-height alignment: Enables a SYS 1 T-LOC or Classic Systainer to serve as an adjacent material support.
  • Non-slip rubber feet: Help maintain secure footing on a suitable surface.
  • Extended front support: The longer support bolt helps resist forward tipping.
  • Retrofit installation: Add the feet to a compatible saw that is not already equipped.
  • Compact working arrangement: Useful for floor-level installation and assembly setups.
  • Replacement option: Restore the intended support arrangement when existing components are missing or damaged.

Product Compatibility

  • Festool KAPEX KS 60: Compatible sliding compound mitre saw.
  • Festool KAPEX KSC 60: Compatible cordless sliding compound mitre saw.
  • Adjacent workpiece support: SYS 1 T-LOC and Classic Systainers provide the specified matching support height.

Check Your Existing Saw Equipment

Festool lists these elevation components as already included with KS 60 set variants. Check your saw's supplied equipment before ordering an additional set.

Features

  • Intermediate elevation feet: Raise the saw's table to the specified Systainer support height.
  • Rubber contact surfaces: Provide non-slip footing.
  • Extended support bolt: Completes the raised saw's front support arrangement.
  • Machine-specific mounting: Designed for the compatible KAPEX models listed above.

Benefits

  • Easier material positioning: Support longer workpieces closer to the cutting-table plane.
  • Convenient setup: Use a suitable Systainer already available in your equipment.
  • More consistent preparation: Reduce unsupported overhang when arranging repeated cuts.
  • Practical portability: Create a compact support arrangement for installation tasks.

Application

  • Supporting longer strips, mouldings and trim during cutting preparation.
  • Floor-level cutting setups on a stable, level surface.
  • Interior installation and assembly work.
  • Retrofitting compatible saws with elevation feet.
  • Replacing worn, damaged or missing elevation components.

Extra Information

  • Product identification: FES500121 corresponds to Festool manufacturer part number 500121.
  • Support positioning: Place the matching Systainer alongside the saw beneath the projecting workpiece.
  • Surface preparation: The saw and adjacent support must stand on the same stable, level plane.
  • Workpiece control: Continue to use the saw's prescribed clamping and support procedures.

Check Alignment Before Cutting

Rest a straight workpiece across the saw table and adjacent support. Confirm that it sits naturally without rocking, lifting from the table or being pushed out of alignment.

Position Supports for the Material

Support long stock where needed to control overhang. Arrange the offcut so it can separate without trapping the blade or disturbing the retained workpiece.

Keep the Setup Stable

Clear loose debris from beneath the feet and support case. Recheck stability whenever the equipment is moved or the workpiece arrangement changes.

Pro Tips

  • Check support height with the saw switched off before starting a cutting sequence.
  • Keep the Systainer lid closed and securely latched during use as a support.
  • Position the case so the workpiece rests on a stable area of its top.
  • Inspect the feet and fasteners periodically for damage or loosening.
  • Use additional suitable supports when the material length or shape requires them.

How to Use

  • Disconnect the saw from its power supply or remove its batteries before installation.
  • Secure the machine in the position specified by its instructions to access the mounting points safely.
  • Fit the elevation feet and mounting bolts according to Festool's installation procedure.
  • Install and adjust the extended front support bolt as directed for the saw.
  • Return the machine to a stable, level surface and check that it stands securely.
  • Position a matching SYS 1 Systainer alongside the saw and check workpiece support alignment before cutting.

Safety

  • Isolate the saw from its power source before fitting or adjusting the feet.
  • Install all components correctly and check that fasteners are secure.
  • Place the saw and supports on a firm, level surface and confirm stability before use.
  • Support and clamp the workpiece according to the saw's operating instructions.
  • Keep hands clear of the blade and avoid arrangements that can pinch the blade or destabilise the machine.
  • Wear suitable eye, hearing and respiratory protection during sawing.

Specifications

Description Spec
BrandFestool
Cat No.FES500121
Manufacturer Part Number500121
ModelA-SYS-KS 60
Product TypeElevation feet / intermediate base set
Compatible SawsFestool KAPEX KS 60 and KSC 60
Height-Matching FunctionAligns saw table with SYS 1 T-LOC and Classic Systainer support height
Foot Contact SurfaceNon-slip rubber
Additional SupportExtended front support bolt
InstallationRetrofit to compatible saw mounting points
Pack Quantity1 set

Scope of Delivery:

  • 4 × Elevation feet.
  • 4 × Installation bolts.
  • 1 × Extended support bolt.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy