Menu
Your Cart

Festool SL-KS 60 LED Spotlight for KAPEX KS 60 Mitre Saw 230 V

Festool SL-KS 60 LED Spotlight for KAPEX KS 60 Mitre Saw 230 V
Festool SL-KS 60 LED Spotlight for KAPEX KS 60 Mitre Saw 230 V
  • Brand: FESTOOL
  • Model: FES500120
  • Weight: 0.13kg
  • Dim: 175 mm x 75 mm x 60 mm
  • UPC: 4014549212189
Price:
R 2,245.38
Ex VAT: R 1,952.50

Available Options

Festool SL-KS 60 LED Spotlight for KAPEX KS 60 – 230 V

At a Glance: Illuminate your cutting position with an LED spotlight that projects the saw blade’s shadow onto the workpiece. Designed for retrofitting the Festool KAPEX KS 60, with straightforward two-screw installation.

Bring greater clarity to your cutting setup with the Festool SL-KS 60 LED spotlight. This purpose-built accessory illuminates the workpiece and uses the shadow of the installed saw blade to show the cutting position directly on the material. The result is a clear visual reference for aligning your pencil mark before making the cut. Whether you are trimming skirting boards, preparing framing components or cutting furniture parts to length, improved visibility helps you position each workpiece with confidence. Article 500120 is the 230 V version for the corded KAPEX KS 60 and can be fitted as an upgrade to a compatible saw without spot lighting.

Blade-shadow guidance for confident positioning

The light projects the silhouette of the actual saw blade onto the workpiece, providing a direct reference for the intended cut. Use the shadow alongside your scribe mark to check positioning before operating the saw.

Product Highlights

  • Clear cutting reference: Projects the saw blade’s shadow directly onto the material.
  • Improved mark visibility: Illuminates the cutting area to help you locate and align your scribe mark.
  • Purpose-built fit: Designed specifically for retrofitting the KAPEX KS 60.
  • Simple mounting: The spotlight installs using two screws at the designated mounting position.
  • Efficient LED lighting: The published light-source data specifies 0.8 W power consumption and 90 lumens of useful luminous flux.

Product Compatibility

  • Festool KAPEX KS 60 / KS 60 E: Suitable for the compatible 230 V corded sliding compound mitre saw.
  • KS 60 retrofit applications: Adds spot lighting to a compatible saw supplied without this accessory.
  • KS 60 set variants: Festool lists the spotlight as already included with KS 60 set variants; check your existing equipment before ordering.

Compatibility Note: Check both the saw model and voltage before ordering. Article 500120 is the 230 V version. Compatibility with other KAPEX models should be confirmed separately.

Features

  • LED illumination: Provides light at the workpiece and cutting position.
  • Blade-shadow indication: Uses the installed blade to produce the cutting reference.
  • Dedicated mounting arrangement: Attaches to the KS 60 using two screws.
  • 5,000 K colour temperature: Published light-source specification for the 230 V version.
  • Non-dimmable light source: Designed for its dedicated cutting-area lighting function.

Benefits

  • More confident alignment: Helps you see where the blade will meet the material before cutting.
  • Easier setup checks: Makes it simpler to compare the cutting position with your pencil or scribe mark.
  • Practical saw upgrade: Adds a useful positioning aid to an existing compatible KS 60.
  • Greater control over material placement: Helps you place the cut on the intended side of the marked line.

Application

  • Positioning timber for crosscuts on the KAPEX KS 60.
  • Aligning marked cuts on skirting boards, architraves and trim.
  • Checking workpiece placement for mitre and bevel cuts.
  • Preparing joinery and furniture components to marked lengths.
  • Retrofitting cutting-area illumination to a compatible saw.

Extra Information

How the Cutting Reference Works

The spotlight illuminates the area around the blade, allowing the blade’s silhouette to fall onto the workpiece. Observe this reference as you position the material, following the saw’s operating instructions.

Mark Visibility and Cutting Accuracy

Good illumination supports accurate positioning, but the final result also depends on the correct blade, secure workpiece support and the saw’s mechanical settings. Check critical dimensions with a trial cut before machining finished components.

Keep the Light Clear

Dust accumulation can reduce visibility. Disconnect the saw before cleaning, and follow Festool’s maintenance guidance for the light and surrounding components.

Check Existing Set Contents

KS 60 set variants may already have the spotlight fitted or supplied. Inspect your saw and accessory kit before purchasing an additional unit.

Pro Tips

  • Mark the waste side of the workpiece so you can position the blade without removing material from the finished length.
  • Use a fine, clear pencil line for easier alignment with the blade shadow.
  • Support and clamp the material before making the cut; illumination does not secure the workpiece.
  • Make a test cut on an offcut when setting up an important mitre joint or finished component.

How to Use

  • Confirm that the saw is a compatible 230 V KAPEX KS 60 and disconnect it from the mains supply.
  • Fit the spotlight at the designated mounting position, following Festool’s fitting instructions and securing it with the specified two-screw arrangement.
  • Check that the installation is secure and does not interfere with the guard or saw movement before restoring power.
  • Operate the spotlight as described in the saw instructions and position the marked workpiece using the projected blade shadow.
  • Secure the material and make the cut using the normal safe operating procedure for the KS 60.

Safety

  • Disconnect the saw from the mains before fitting, removing or cleaning the spotlight.
  • Follow Festool’s installation instructions and use the accessory only with the specified compatible equipment.
  • Do not use the light if its housing or electrical connections are damaged.
  • Keep hands clear of the blade when checking the cutting reference.
  • Wear suitable eye and hearing protection when sawing, and use appropriate dust extraction and respiratory protection for the material.

Specifications

Description Spec
BrandFestool
Product DescriptionMitre Saw LED Spotlight Accessory
Cat No.FES500120
Festool Article Number500120
ModelSL-KS 60
Voltage Version230 V
Compatible SawFestool KAPEX KS 60 / KS 60 E, compatible 230 V version
Lighting TechnologyLED
Cutting ReferenceSaw blade shadow projected onto the workpiece
MountingTwo-screw installation
Light-Source On-Mode Power0.8 W
Useful Luminous Flux90 lm
Correlated Colour Temperature5,000 K
Colour Rendering Index80
DimmableNo
EU Light-Source Energy Efficiency ClassE

Scope of Delivery:

  • 1 x Festool SL-KS 60 LED spotlight, 230 V version, article 500120.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy