Menu
Your Cart

Festool S8 HW 45° D26-KL OFK Chamfer Cutter 26 mm with 8 mm Shank and Guide Bearing

Festool S8 HW 45° D26-KL OFK Chamfer Cutter 26 mm with 8 mm Shank and Guide Bearing
Festool S8 HW 45° D26-KL OFK Chamfer Cutter 26 mm with 8 mm Shank and Guide Bearing
Festool S8 HW 45° D26-KL OFK Chamfer Cutter 26 mm with 8 mm Shank and Guide Bearing
Festool S8 HW 45° D26-KL OFK Chamfer Cutter 26 mm with 8 mm Shank and Guide Bearing
Festool S8 HW 45° D26-KL OFK Chamfer Cutter 26 mm with 8 mm Shank and Guide Bearing
  • Brand: FESTOOL
  • Model: FES499799
  • Weight: 0.07kg
  • Dim: 50 mm x 50 mm x 100 mm
  • UPC: 4014549202197
Price:
R 2,259.18
Ex VAT: R 1,964.50

Available Options

Festool S8 HW 45° D26-KL OFK Chamfer Cutter with Guide Bearing

At a Glance: 45° carbide chamfer cutter with a 26 mm diameter, 7 mm cutting length and 8 mm shank. Includes a steel guide bearing and can be used with or without the bearing in an appropriately guided setup.

Give plastic edging and solid wood edges a crisp, angled finish with the Festool S8 HW 45° D26-KL OFK Chamfer Cutter. Designed for 45° edge trimming, this compact carbide cutter creates a straight bevel that softens sharp corners and adds a clean finishing detail to furniture and joinery components. The supplied steel ball bearing follows a suitable reference edge to guide the cut, while the optimised bearing mount also permits use without the bearing when an appropriate alternative guiding arrangement is provided. With its 8 mm shank, 26 mm cutter diameter and 48 mm overall length, it is a dedicated accessory for the specified Festool routers and edge routers. Adjust the routing depth to establish the required chamfer, test the profile on an offcut and bring a consistent finishing touch to your project.

A Crisp 45° Edge Finish

A chamfer creates a flat, angled face between two adjoining surfaces. This cutter produces a 45° profile, giving suitable plastic edging and solid wood components a defined bevel rather than a rounded edge.

Product Highlights

  • 45° chamfer geometry: Designed for angled edge trimming and finishing.
  • HW carbide cutting material: Suitable for plastic and solid wood edges.
  • Steel guide bearing included: Provides guidance along a suitable reference edge.
  • Flexible bearing arrangement: Can be used with the 12.7 mm guide bearing or without it when correctly guided.
  • 8 mm shank: Fits the appropriate 8 mm collet in a compatible machine.
  • Compact dimensions: 26 mm cutter diameter, 7 mm cutting length and 48 mm overall length.

Product Compatibility

  • Festool OF 1010: Compatible when fitted with the appropriate 8 mm collet.
  • Festool OF 1010 R: Compatible when fitted with the appropriate 8 mm collet.
  • Festool OFK 700: Listed by Festool for use with this cutter.
  • Festool MFK 700: Listed by Festool for use with this cutter.
  • Festool MFKC 700: Listed by Festool for use with this cutter.

Compatibility note: This cutter has an 8 mm shank and requires the correct 8 mm collet. Confirm the machine, base configuration, cutter clearance and permitted operating speed before use. Bearing-free operation requires a suitable alternative guiding arrangement.

Features

  • Fixed 45° cutting profile: Forms a straight bevel along the workpiece edge.
  • Carbide cutting edges: HW cutting material for the specified plastic and solid wood applications.
  • Included steel ball bearing: Guides the cutter against an appropriate reference surface.
  • Optimised bearing mount: Supports use with a 12.7 mm guide bearing or without the bearing.
  • Conventional 8 mm shank: Secures in a compatible 8 mm router collet.

Benefits

  • Refined finished edges: Adds a clean bevel to suitable edging and timber components.
  • Consistent guidance: The bearing follows the reference edge to help maintain a uniform profile.
  • Adaptable setup: Choose bearing guidance or an appropriate machine-guided arrangement to suit the task.
  • Adjustable chamfer size: Set the cutter position to obtain the required bevel within the cutter's usable geometry.
  • Practical material versatility: Covers both suitable plastic edging and solid wood edge finishing.

Applications

  • Creating 45° chamfers on solid wood edges.
  • Trimming and bevel finishing suitable plastic edging.
  • Finishing solid wood edging applied to furniture panels.
  • Softening sharp corners on suitable furniture and joinery components.
  • Producing consistent bevel details with a compatible Festool routing setup.

Extra Information

Understanding the Model Designation

S8 identifies the 8 mm shank, HW identifies carbide cutting material, 45° describes the chamfer angle and D26 identifies the 26 mm cutter diameter. Use the complete designation and article number when matching this cutter to your requirements.

Bearing-Guided Operation

The supplied steel bearing runs along the reference edge while the cutting edges form the chamfer. Keep that reference surface clean and sound because irregularities can affect the routed profile.

Operation Without the Bearing

The bearing mount permits operation without a guide bearing. In this configuration, guidance must come from a suitable fence, stop or machine arrangement. Follow the instructions for the selected router and guiding system.

Cutting Length and Chamfer Size

The 7 mm cutting length describes the cutter's usable cutting section. It should not be treated as a stated maximum finished chamfer width. The resulting bevel depends on the cutter position, workpiece geometry and guiding arrangement.

Parts Numbers Matter

Important: Please confirm Festool article number 499799, the machine model and the required 8 mm collet before ordering to ensure compatibility.

Pro Tips

  • Make a test cut on matching scrap material before machining the finished component.
  • Adjust the cutter position gradually until the chamfer size is correct.
  • Check that the guide bearing rotates freely and its mounting is secure before use.
  • Keep the router base and reference surfaces free from chips and dust.
  • Maintain a steady feed and avoid pausing with the rotating cutter against the material.
  • Use an effective dust extraction arrangement suitable for the machine and material.

How to Use

  • Disconnect the router from its power supply or remove its battery before installation.
  • Confirm machine compatibility and fit the appropriate 8 mm collet.
  • Inspect the cutter and guide bearing, then install the cutter to the insertion depth specified in the machine and cutter instructions.
  • Select bearing-guided operation or an approved alternative guiding arrangement.
  • Secure the workpiece, check cutter clearance and set the required cutter position and operating speed.
  • Make a test cut and inspect the chamfer before adjusting the setup.
  • Route the finished edge in the direction specified by the machine instructions, maintaining stable guidance.
  • Wait for the cutter to stop completely before putting down the machine or inspecting the finished edge.

Safety

  • Follow the router, cutter and guiding accessory instructions.
  • Disconnect the power supply or remove the battery before changing cutters, bearings or settings.
  • Use the correct 8 mm collet and observe the specified insertion depth and permitted operating speed.
  • Do not use damaged cutting edges, loose bearing fasteners or a seized guide bearing.
  • Secure the workpiece and keep hands clear of the rotating cutter.
  • Wear suitable eye and hearing protection. Use dust extraction and respiratory protection appropriate to the material.
  • Use a suitable alternative guiding arrangement whenever the bearing is removed.
  • Have sharpening and repairs carried out by a qualified specialist.

Specifications

Description Spec
BrandFestool
Product Description:Router Chamfer Cutter
Cat No.FES499799
Festool Article Number499799
ModelS8 HW 45° D26-KL OFK
Product TypeChamfer cutter with guide bearing
Chamfer Angle45°
Cutter Diameter (D)26 mm
Cutting Length (NL)7 mm
Overall Length (GL)48 mm
Shank Diameter (s)8 mm
Cutting MaterialHW carbide
Guide Bearing Diameter12.7 mm
Guide Bearing MaterialSteel
Guide Bearing IncludedYes
Bearing-Free OperationPermitted with a suitable alternative guiding arrangement
Compatible MachinesOF 1010, OF 1010 R, OFK 700, MFK 700 and MFKC 700
Suitable Edge MaterialsPlastic and solid wood
Quantity1 cutter

Scope of Delivery:

  • 1 x Festool S8 HW 45° D26-KL OFK chamfer cutter, article 499799, with steel guide bearing.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy