Menu
Your Cart

Festool Rubin 2 P40 Sanding Belts 533 x 75 mm – 10 Pack

Festool Rubin 2 P40 Sanding Belts 533 x 75 mm – 10 Pack
Festool Rubin 2 P40 Sanding Belts 533 x 75 mm – 10 Pack
Festool Rubin 2 P40 Sanding Belts 533 x 75 mm – 10 Pack
Festool Rubin 2 P40 Sanding Belts 533 x 75 mm – 10 Pack
Festool Rubin 2 P40 Sanding Belts 533 x 75 mm – 10 Pack
  • Brand: FESTOOL
  • Model: FES499155
  • Weight: 0.43kg
  • Dim: 168 mm x 163 mm x 100 mm
  • UPC: 4014549180983
Price:
R 1,188.53
Ex VAT: R 1,033.50

Available Options

Festool Rubin 2 Sanding Belts L533x75 P40 RU2/10

At a Glance: P40 coarse grit | 533 x 75 mm belts | For Festool BS 75 | Pack of 10

Prepare demanding timber surfaces for the next stage of finishing with Festool Rubin 2 P40 sanding belts. Designed for woodworking and sized for the Festool BS 75 belt sander, these coarse abrasive belts are suited to initial sanding where substantial material removal is required. Use them to work down rough timber surfaces and begin removing pronounced surface irregularities before progressing through finer grits. The 533 mm belt length and 75 mm width provide the correct format for the BS 75, while the 10-belt pack keeps replacement abrasives ready for ongoing workshop work. P40 is the starting point for a sanding sequence; follow with progressively finer abrasives to prepare the wood for its intended finish.

Rubin 2: Abrasives for Wood Preparation

The Rubin abrasive range is dedicated to wooden materials, supporting sanding stages before varnishing, oiling or waxing. This P40 version provides a coarse starting grit when a finer abrasive would remove material too slowly.

Product Highlights

  • Coarse P40 grit: Suited to initial sanding and substantial stock removal on suitable wooden surfaces.
  • Woodworking abrasive: Part of Festool’s Rubin range for preparing timber before finishing.
  • BS 75 belt format: Measures 533 mm in circumference and 75 mm across the belt.
  • Continuous sanding belt: Fits around the sander’s rollers and is secured by the machine’s belt-tensioning mechanism.
  • 10-belt pack: Provides replacement belts for repeated sanding tasks.

Product Compatibility

  • Festool BS 75: Designed for the Festool BS 75 belt sander using 533 x 75 mm sanding belts.
  • Correct belt dimensions: Confirm both the required belt length and width before ordering replacement abrasives.
  • Wood preparation: Select P40 when the condition of the timber calls for a coarse initial sanding stage.

Compatibility note: These 533 x 75 mm belts are for the BS 75 format. They are not the 620 x 105 mm belts used by the Festool BS 105.

Features

  • P40 abrasive grade: Coarse grit for the early stages of timber preparation.
  • Rubin 2 range: Abrasive developed for working on wooden materials.
  • 533 x 75 mm dimensions: Continuous-loop belt format for the Festool BS 75.
  • Pack quantity of 10: Multiple replacement belts supplied in one pack.

Benefits

  • Start with the appropriate grit: Tackle rough surfaces with a coarse abrasive before refining the sanding pattern.
  • Build a consistent sanding sequence: Follow P40 with finer grades to progressively remove coarse sanding scratches.
  • Keep work moving: Replace worn belts promptly instead of compensating with excessive pressure.
  • Prepare for finishing: Establish the initial surface preparation needed before later sanding stages and the chosen coating.

Application

  • Initial coarse sanding of rough wooden surfaces.
  • Substantial material removal on suitable solid timber workpieces.
  • Reducing pronounced surface irregularities before finer sanding.
  • Early-stage preparation of timber components in joinery and workshop projects.
  • Starting a progressive sanding sequence before varnishing, oiling or waxing.

Extra Information

  • Product code: FES499155.
  • Festool order number: 499155.
  • Model designation: L533x75 P40 RU2/10.
  • Current manufacturer designation: L533x75 P40 RU/10.
  • Pack contents: 10 P40 sanding belts.

Where Does P40 Fit in a Sanding Sequence?

P40 is a coarse abrasive that leaves a pronounced scratch pattern. Choose it when the surface requires significant initial work, then move through finer grades, such as P60 and P80, as appropriate. If the timber is already reasonably smooth, begin with a finer grit to avoid unnecessary material removal.

Understanding Belt Dimensions

The 533 mm measurement is the length around the continuous belt loop. The 75 mm measurement is the belt width. Both measurements must match the sander’s requirements.

Preparing for a Finish

A surface sanded with P40 still needs further refinement. The final grit depends on the timber, the desired appearance and the requirements of the varnish, oil or wax being applied.

Pro Tips

  • Test on an offcut or an inconspicuous area to assess the rate of material removal.
  • Keep the sander level and moving to reduce the risk of hollows and gouges.
  • Work with the grain where practical and use steady, overlapping passes.
  • Remove sanding dust between grit changes so coarse particles do not scratch the surface during finer sanding.
  • Inspect under angled light before moving to the next grit.
  • Store spare belts dry and protected from crushing or sharp creases.

How to Use

  • Switch off and unplug the sander before changing the belt.
  • Release the belt tension according to the machine’s instructions and remove the old belt.
  • Fit the replacement belt, observing any directional markings on the belt and sander.
  • Restore belt tension and check tracking using the procedure specified in the machine manual.
  • Secure the workpiece and connect suitable dust extraction.
  • Sand using controlled passes, keeping the machine level and avoiding prolonged sanding in one spot.
  • Inspect the surface regularly, then continue with progressively finer grits as required.
  • Switch off, wait for the belt to stop and unplug the machine before adjustments or further belt changes.

Coarse sanding note: P40 can remove material quickly and leave deep scratches. Use particular care around edges and thin sections. It is generally unsuitable for delicate veneers or surfaces that only need light refinement.

Safety

  • Wear suitable eye, hearing and respiratory protection when sanding.
  • Use appropriate dust extraction and keep the work area ventilated.
  • Inspect the belt for damage before use and check its tension and tracking according to the sander’s manual.
  • Secure the workpiece and keep hands, loose clothing and cables clear of the moving belt.
  • Disconnect the machine from the power supply before changing belts or making adjustments.
  • Allow the belt to stop completely before setting the sander down.
  • Identify existing coatings before sanding and use dust-control measures appropriate to the material.

Specifications

DescriptionSpec
BrandFestool
Cat No.FES499155
Festool Order Number499155
ModelL533x75 P40 RU2/10
Product TypeAbrasive sanding belt
Abrasive RangeRubin 2
GritP40
Sanding GradeCoarse
Belt Length533 mm
Belt Width75 mm
Compatible SanderFestool BS 75
Primary ApplicationWood sanding and preparation
Quantity10 belts

Scope of Delivery:

  • 10 x Festool Rubin 2 P40 sanding belts, 533 x 75 mm.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy