Menu
Your Cart

Festool WOOD RIP CUT Carbide Saw Blade 160 x 2.2 x 20 mm PW12 – 12 Teeth

Festool WOOD RIP CUT Carbide Saw Blade 160 x 2.2 x 20 mm PW12 – 12 Teeth
Festool WOOD RIP CUT Carbide Saw Blade 160 x 2.2 x 20 mm PW12 – 12 Teeth
Festool WOOD RIP CUT Carbide Saw Blade 160 x 2.2 x 20 mm PW12 – 12 Teeth
Festool WOOD RIP CUT Carbide Saw Blade 160 x 2.2 x 20 mm PW12 – 12 Teeth
Festool WOOD RIP CUT Carbide Saw Blade 160 x 2.2 x 20 mm PW12 – 12 Teeth
  • Brand: FESTOOL
  • Model: FES496301
  • Weight: 0.31kg
  • Dim: 215 mm x 205 mm x 10 mm
  • UPC: 4014549120491
Price:
R 1,626.68
Ex VAT: R 1,414.50

Available Options

Festool WOOD RIP CUT Saw Blade HW 160x2,2x20 PW12

At a Glance: 160 mm diameter | 2.2 mm cutting width | 20 mm bore | 12 carbide teeth | For ripping solid wood

Cut solid timber along the grain with the Festool WOOD RIP CUT HW 160x2,2x20 PW12 saw blade. Designed for productive ripping in hardwood and softwood, its 12-tooth configuration supports efficient cutting progress when reducing boards to width or preparing components for furniture and construction projects. A steel blade body carries fine-grain carbide teeth, with tooth geometry tailored to the ripping application. The blade has a 160 mm diameter, 2.2 mm cutting width and 20 mm bore. Match these specifications to your saw’s requirements before fitting.

WOOD RIP CUT: Purpose-Made for Cutting Along the Grain

Ripping follows the length of the wood fibres. A dedicated rip blade uses fewer teeth and generous spaces between them to accommodate the chips produced during this type of cut. Choose this blade when efficient solid timber ripping is the priority.

Product Highlights

  • 12-tooth configuration: Designed for efficient longitudinal cutting in solid timber.
  • Fine-grain carbide teeth: Provide wear-resistant cutting edges for woodworking.
  • Hardwood and softwood use: Suitable for ripping a range of solid timber species.
  • PW tooth geometry: Application-specific tooth form combined with a 20° chip angle.
  • 160 mm blade format: Features a 20 mm bore and 2.2 mm cutting width.
  • Colour-coded range: Helps identify the blade’s intended material application.

Product Compatibility

  • Festool TS 55: For versions specified to use 160 mm blades with a 2.2 mm cutting width and 20 mm bore.
  • Festool TSC 55: For versions approved for this blade format.
  • Festool ATF 55: Listed for the corresponding 160 mm blade system.
  • Festool AP 55: Listed for the corresponding 160 mm blade system.

Compatibility note: Check your exact saw model and manual. TS 55 and TSC 55 generations can have different blade requirements; the shared model family name alone does not confirm compatibility. Verify diameter, cutting width, bore, blade thickness and any riving-knife requirements.

Features

  • Carbide-tipped construction: Steel blade body with fine-grain carbide cutting teeth.
  • 12 teeth: Low tooth count suited to solid wood ripping.
  • PW tooth form: Geometry selected for the intended cutting task.
  • 20° chip angle: Part of the blade’s dedicated ripping geometry.
  • 1.6 mm blade body: Combined with a 2.2 mm cutting width.

Benefits

  • Efficient board preparation: Cut solid timber to width before subsequent machining.
  • Effective chip clearance: Spaces between the teeth accommodate chips during longitudinal cuts.
  • Purposeful blade selection: Use a dedicated ripping blade for repeated cuts along the grain.
  • Versatile workshop application: Prepare components for furniture, decking and timber cladding projects.

Application

  • Ripping solid hardwood and softwood along the grain.
  • Reducing timber boards to the required width.
  • Preparing solid wood components for furniture manufacture.
  • Cutting suitable timber components for patio and decking construction.
  • Preparing solid wood boards for façade and cladding work.

Extra Information

  • Product code: FES496301.
  • Festool order number: 496301.
  • Model designation: HW 160x2,2x20 PW12.
  • Blade range: WOOD RIP CUT.
  • Primary cutting direction: Along the grain in solid timber.

Understanding the Blade Dimensions

The 160 mm dimension is the outside diameter. The 2.2 mm dimension is the cutting width, also called the kerf, while 20 mm is the centre bore diameter. The blade body is 1.6 mm thick. These dimensions serve different purposes and must suit the saw.

Why Does a Rip Blade Have Fewer Teeth?

Longitudinal cuts produce chips that need space to clear the cut. A low tooth count provides larger gaps between teeth. Feed steadily and allow the blade to cut without forcing the saw.

Selecting for Surface Finish

This blade prioritises solid timber ripping. When a project requires fine crosscuts or delicate veneered and laminated surfaces, choose a blade designed for that material and finish requirement. Allow for further machining or sanding where necessary.

Pro Tips

  • Inspect timber for nails, screws and other foreign objects before cutting.
  • Support both the workpiece and offcut so the kerf cannot close onto the blade.
  • Use a compatible guide rail or fence where appropriate for straight ripping.
  • Maintain a steady feed rate; investigate burning or increased cutting resistance.
  • Check the guide rail splinterguard after changing to a blade with a different cutting width.
  • Keep the blade clean using a suitable cleaning method, and have damaged or dull teeth assessed by a qualified sharpening service.

How to Use

  • Disconnect the saw from its power source or remove its battery before changing the blade.
  • Confirm that the blade dimensions and marked speed rating meet the saw’s requirements.
  • Fit the blade according to the saw manual, observing the correct rotation direction and tightening procedure.
  • Check that the guards and any fitted riving knife operate correctly.
  • Secure and support the timber, keeping the intended cutting path clear.
  • Set cutting depth and speed according to the machine instructions and material.
  • Connect suitable dust extraction and make the cut with a controlled, steady feed.
  • Allow the blade to stop completely before lifting the saw away or handling the offcut.

Cutting note: Blade diameter is not cutting depth. Maximum cutting capacity depends on the saw, cutting angle and guide setup.

Safety

  • Wear suitable eye, hearing and respiratory protection, and use appropriate dust extraction.
  • Disconnect the saw from its power source before installing or removing the blade.
  • Use only a blade approved for the exact saw and never exceed the blade’s marked maximum speed.
  • Inspect for cracks, damaged teeth or distortion before use.
  • Keep guards and any fitted riving knife correctly installed and functioning.
  • Support the timber to prevent blade pinching and follow the saw manual’s kickback precautions.
  • Keep hands clear of the cutting path and never reach beneath the workpiece while cutting.
  • Wait for the blade to stop completely before making adjustments or clearing offcuts.

Specifications

DescriptionSpec
BrandFestool
Cat No.FES496301
Festool Order Number496301
ModelHW 160x2,2x20 PW12
Product TypeCarbide-tipped circular saw blade
Blade RangeWOOD RIP CUT
Diameter160 mm
Cutting Width / Kerf2.2 mm
Bore Diameter20 mm
Blade Body Thickness1.6 mm
Number of Teeth12
Tooth ShapePW
Chip Angle20°
Tooth MaterialFine-grain carbide
Suitable MaterialsSolid hardwood and softwood
Primary ApplicationRip cuts along the grain
Quantity1 blade

Scope of Delivery:

  • 1 x Festool WOOD RIP CUT saw blade HW 160x2,2x20 PW12.

Contents note: Saw blade only. Saw, guide rail, clamps and dust extraction equipment are supplied separately.

Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy