Menu
Your Cart

Festool ZA-DF 500/700 Additional Stop and Support Widener for DOMINO Joiners

Festool ZA-DF 500/700 Additional Stop and Support Widener for DOMINO Joiners
Festool ZA-DF 500/700 Additional Stop and Support Widener for DOMINO Joiners
Festool ZA-DF 500/700 Additional Stop and Support Widener for DOMINO Joiners
Festool ZA-DF 500/700 Additional Stop and Support Widener for DOMINO Joiners
Festool ZA-DF 500/700 Additional Stop and Support Widener for DOMINO Joiners
Festool ZA-DF 500/700 Additional Stop and Support Widener for DOMINO Joiners
Festool ZA-DF 500/700 Additional Stop and Support Widener for DOMINO Joiners
  • Brand: FESTOOL
  • Model: FES495666
  • Weight: 0.13kg
  • Dim: 155 mm x 77 mm x 70 mm
  • UPC: 4014549101261
Price:
R 1,013.15
Ex VAT: R 881.00

Available Options

Festool Additional Stop ZA-DF 500/700 for DOMINO Joining Machines

At a Glance: Support widener with folding side stops | 20 mm edge-to-mortise-centre reference | Tool-free mounting | For compatible DOMINO joiners.

Give your DOMINO joining machine a more secure footing when working on narrow components and near edges with the Festool ZA-DF 500/700 additional stop. This practical accessory combines an enlarged bearing surface with folding index stops, helping you position the machine consistently while reducing its tendency to tip at the edge of a workpiece. Using the additional stop's indexing pins brings the mortise centre closer to the reference edge, providing a 20 mm offset instead of the 37 mm reference described for the DF 500's standard stop catches. Tool-free installation and folding pins make it straightforward to adapt the setup as your joint layout requires.

Additional Support and a Closer Edge Reference

The widened support helps steady the machine against the workpiece. The folding stops provide a physical edge reference for positioning a mortise, making the accessory particularly useful when joining narrow parts or working close to an edge.

Product Highlights

  • Wider bearing surface: Helps reduce machine tipping when support is limited near an edge.
  • 20 mm indexing reference: Positions the mortise centre closer to the selected workpiece edge.
  • Folding stop pins: Fold the pins in or out to suit the positioning method.
  • Tool-free attachment: Mounts to the compatible machine without separate tools.
  • Support widener and side stop: Combines two useful positioning functions in one accessory.
  • DOMINO compatibility: Specified for DF 500, DF 500 R, DFC 500 and DF 700 joining machines.

Product Compatibility

  • Festool DOMINO DF 500: Compatible joining machine.
  • Festool DOMINO DF 500 R: Compatible joining machine listed by Festool.
  • Festool DOMINO DFC 500: Compatible cordless joining machine.
  • Festool DOMINO XL DF 700: Compatible joining machine listed in Festool's current accessory information.

Understanding the 20 mm Measurement

The 20 mm dimension is the lateral distance from the edge referenced by the deployed stop to the centre of the mortise. Cutter diameter, mortise depth and fence height are selected separately on the joining machine to suit the workpiece and joint.

Features

  • Extended support surface: Increases the machine's bearing area against the workpiece.
  • Integrated side stops: Provide a repeatable reference from the workpiece edge.
  • Fold-away indexing pins: Allow the stops to be deployed or retracted as required.
  • Tool-free mounting: Supports convenient installation and removal.

Benefits

  • Steadier positioning: Additional bearing support helps you hold the machine squarely during a plunge.
  • More options on narrow components: The closer edge reference allows mortises to be positioned nearer the stop edge.
  • Consistent referencing: A physical stop helps locate corresponding mortises from matching reference edges.
  • Convenient setup changes: Fold the pins away when another alignment method is needed.

Application

  • Joining narrow workpieces with a compatible DOMINO machine.
  • Positioning mortises near workpiece edges.
  • Supporting the machine where the available bearing area is limited.
  • Referencing matching components from a consistent edge.
  • Furniture and joinery assembly where accurate mortise positioning is required.

Extra Information

  • Product identification: FES495666 corresponds to Festool order number 495666.
  • Current model designation: ZA-DF 500/700.
  • Earlier catalogue designation: Also listed as ZA-DF 500.
  • Accessory function: Support widener and side stop for positioning the joining machine.

Keep Reference Edges Consistent

Mark the reference faces and edges before machining. Use the corresponding reference on each mating component so that the mortises align as intended during assembly.

Match the Mortise to the Workpiece

Check that the selected cutter, mortise position and plunge depth leave sufficient material around the joint. A closer edge reference should always be considered together with the workpiece dimensions.

Pro Tips

  • Make a trial joint in matching offcuts before machining finished components.
  • Keep the support and reference surfaces free of chips that could affect alignment.
  • Check that the accessory is securely fitted and the selected stop pin is fully positioned.
  • Maintain firm, even contact between the support and workpiece throughout the plunge.
  • Clamp the workpiece securely; the additional stop positions the machine and does not secure the timber to the bench.

How to Use

  • Switch off the joining machine and disconnect its mains supply or remove its battery before fitting the accessory.
  • Attach the additional stop in the position specified by the machine's instructions and secure its tool-free fastenings.
  • Deploy the required indexing pin, or fold the pins away when using another positioning reference.
  • Select the correct cutter, fence setting and mortise depth, then secure the workpiece.
  • Seat the support firmly against the workpiece and bring the deployed stop against the chosen reference edge.
  • Connect suitable dust extraction and make a controlled plunge according to the machine manual. Check a trial joint before continuing.

Safety

  • Disconnect the machine's power source before fitting, removing or adjusting the accessory.
  • Check that the stop is securely attached before starting the machine.
  • Clamp the workpiece securely and keep hands clear of the cutter and plunge area.
  • Wear eye, hearing and respiratory protection appropriate to the work and use suitable dust extraction.
  • Maintain stable machine support throughout the plunge; the wider bearing surface assists control but does not replace correct handling.
  • Follow the operating instructions for the specific DOMINO machine, cutter and joint configuration.

Specifications

Description Spec
BrandFestool
Cat No.FES495666
Festool Order Number495666
Product TypeAdditional stop and support widener
ModelZA-DF 500/700
Earlier Catalogue DesignationZA-DF 500
Compatible MachinesDF 500, DF 500 R, DFC 500 and DF 700
Edge-to-Mortise-Centre Reference20 mm when using the additional stop's indexing pins
DF 500 Standard Stop Reference37 mm, reduced to 20 mm using the additional stop
Stop Pin DesignFolding
MountingTool-free
Main ApplicationsJoining narrow workpieces and working near edges
Quantity1 additional stop

Scope of Delivery:

  • 1 x Festool ZA-DF 500/700 additional stop with folding indexing pins.

Scope note: DOMINO joining machine, cutters and DOMINO dowels are supplied separately.

Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy