Menu
Your Cart

Festool Titan 2 StickFix Sanding Sheets 80 × 400 mm P180, 50 Pack

Festool Titan 2 StickFix Sanding Sheets 80 × 400 mm P180, 50 Pack
Festool Titan 2 StickFix Sanding Sheets 80 × 400 mm P180, 50 Pack
  • Brand: FESTOOL
  • Model: FES493179
  • Weight: 0.63kg
  • Dim: 41.5 mm x 9 mm x 6.5 mm
  • UPC: 4014549044841
Price:
R 1,099.98
Ex VAT: R 956.50

Available Options

Festool Titan 2 Sanding Sheets STF 80x400 P180 TI2/50

At a Glance: 80 × 400 mm sanding sheets | P180 grit | StickFix attachment | For filler and paint preparation | Pack of 50

Refine repaired and coated surfaces with Festool Titan 2 P180 sanding sheets. Developed for paint preparation and automotive refinishing, the Titan 2 range tackles repair compounds, fillers, primers and paintwork. These 80 × 400 mm sheets suit the Festool LRS 400 and compatible hand sanding blocks, providing a long sanding surface for controlled preparation. P180 grit is useful for refining the scratch pattern left by earlier sanding stages, while StickFix attachment makes abrasive changes quick and straightforward.

Titan 2: specialist abrasives for surface preparation

Titan 2 combines aluminium oxide abrasive grain with a dust-repellent stearate coating and a flexible, durable supporting structure. This combination supports consistent cutting and helps reduce abrasive loading during suitable dry sanding applications.

Product Highlights

  • P180 refinement: Useful for intermediate sanding of suitable fillers and coating systems.
  • Long rectangular format: The 80 × 400 mm sheet suits extended sanding pads and blocks.
  • StickFix fastening: Hook-and-loop attachment allows convenient sheet replacement.
  • Loading-resistant coating: Helps limit dust accumulation on the abrasive surface.
  • Workshop pack: Includes 50 full-size sheets for ongoing preparation work.

Product Compatibility

  • Festool LRS 400: Compatible with the machine’s specified 80 × 400 mm StickFix sanding pad.
  • Festool HSK-A 80x400: Full-size sheets fit this hand sanding block.
  • Festool HSK-A 80x200: Festool specifies halving the abrasive sheet for this shorter block.

Select the Correct Finishing Grit

Match the sanding sequence to the filler, primer or coating manufacturer’s instructions. Some refinishing systems require finer sanding after P180 before the next coating is applied.

Features

  • Aluminium oxide grain: Provides the cutting action for Titan 2 surface preparation.
  • Stearate coating: Helps repel sanding dust and maintain abrasive performance.
  • StickFix backing: Attaches to a matching hook-and-loop sanding surface.
  • P180 grade: Offers a finer sanding step than the coarser grades used for initial shaping.

Benefits

  • Controlled preparation: Helps refine suitable repaired surfaces before subsequent sanding or coating stages.
  • Convenient changes: Replace worn sheets without a separate clamping operation on compatible StickFix equipment.
  • Machine and manual use: Supports powered sanding and detailed hand preparation with the listed equipment.

Application

  • Intermediate sanding of suitable repair compounds and fillers.
  • Refining previously shaped automotive body repairs.
  • Preparing compatible primer and paint surfaces.
  • Controlled hand sanding during paint preparation and refinishing.

Extra Information

  • Grit progression: Inspect the surface between stages to confirm that deeper scratches have been removed.
  • Material readiness: Allow fillers and coatings to reach their specified sanding condition before starting.
  • Pad condition: A clean, undamaged StickFix pad helps retain the sheet securely.
  • Storage: Keep unused sheets flat, clean and dry.

Pro Tips

  • Use a guide coat where appropriate to reveal remaining scratches and low areas.
  • Apply even pressure and keep the sanding surface properly supported.
  • Check the abrasive regularly for loading or embedded particles that could mark the work.
  • Use suitable dust extraction and keep the equipment’s extraction passages clear.

How to Use

  • Confirm that P180 is appropriate for the material and preparation stage.
  • Disconnect the LRS 400 from its compressed air supply before changing the abrasive.
  • Remove the used sheet and clean loose debris from the sanding pad or hand block.
  • Position the replacement sheet accurately, aligning any extraction openings with the supporting pad, and press it firmly into place.
  • For the HSK-A 80x200, halve the sheet to the required size before fitting.
  • Sand with controlled, overlapping passes, checking the surface frequently.
  • Remove sanding dust and inspect the scratch pattern before moving to the next preparation stage.

Safety

  • Wear suitable eye, hearing and respiratory protection for the sanding operation.
  • Use appropriate dust extraction when sanding fillers, primers and paintwork.
  • Isolate powered equipment before fitting or removing abrasive sheets.
  • Check that the sheet is securely attached and replace damaged or excessively worn abrasives.
  • Follow the equipment instructions and the material manufacturer’s preparation guidance.

Specifications

Description Spec
BrandFestool
Cat No.FES493179
Manufacturer Part Number493179
ModelSTF 80x400 P180 TI2/50
Product TypeRectangular sanding sheets
Abrasive RangeTitan 2
Sheet Dimensions80 × 400 mm
GritP180
Abrasive GrainAluminium oxide
Surface TreatmentDust-repellent stearate coating
AttachmentStickFix hook-and-loop
Compatible EquipmentLRS 400; HSK-A 80x400; HSK-A 80x200 with sheet halved
Pack Quantity50 sheets

Scope of Delivery:

  • 50 × Festool Titan 2 StickFix sanding sheets, 80 × 400 mm, P180.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy