Menu
Your Cart

Festool Titan 2 P120 StickFix Abrasive Sheets 80 x 400 mm – 50 Pack

Festool Titan 2 P120 StickFix Abrasive Sheets 80 x 400 mm – 50 Pack
Festool Titan 2 P120 StickFix Abrasive Sheets 80 x 400 mm – 50 Pack
  • Brand: FESTOOL
  • Model: FES493178
  • Weight: 0.71kg
  • Dim: 41.8 mm x 9 mm x 6.2 mm
  • UPC: 4014549044834
Price:
R 1,099.98
Ex VAT: R 956.50

Available Options

Festool Titan 2 STF 80x400 P120 TI2/50 Abrasive Sheets

At a Glance: P120 Titan 2 abrasive sheets in the long 80 x 400 mm format, with StickFix fastening. For the Festool LRS 400 and compatible HSK-A hand sanding blocks. Supplied in a carton of 50 sheets.

Bring control and consistency to surface preparation with Festool Titan 2 P120 abrasive sheets. Developed for repair compounds, fillers and paintwork, the Titan 2 range is suited to paintshop and automotive refinishing tasks. This P120 version provides a useful step when refining surfaces after coarser sanding and preparing them for subsequent finishing stages. The long rectangular format supports work across extended surfaces, while StickFix hook-and-loop fastening makes abrasive changes quick and straightforward.

Titan 2 – Built for paint preparation

Tough aluminium oxide grain, flexible latex-coated paper and a dust-repellent stearate coating work together to support effective cutting and resist premature loading. Select P120 for the preparation stage that suits your repair system, then progress to finer abrasives as required by the primer or coating specification.

Product Highlights

  • P120 grit: Refines the scratch pattern left by coarser preparation grades while retaining useful cutting action.
  • 80 x 400 mm format: Matches the long pad of the Festool LRS 400 and the HSK-A 80x400 hand sanding block.
  • StickFix attachment: Secure hook-and-loop fastening allows quick sheet changes without gluing or clamping.
  • Loading-resistant coating: The stearate surface treatment helps reduce the build-up of sanding residue.
  • 50-sheet carton: Keeps a consistent grit available for repeat preparation work.

Product Compatibility

  • Festool LRS 400: Use the full sheet on the corresponding 80 x 400 mm StickFix sanding pad.
  • Festool HSK-A 80x400: Suitable for full-length hand sanding with the matching extraction sanding block.
  • Festool HSK-A 80x200: Festool specifies halving the abrasive sheet for this shorter hand sanding block.

Match the Grit to the Coating System

Choose the final sanding grade according to the repair compound, primer or coating manufacturer’s instructions. P120 can form part of a preparation sequence; finer sanding may be required before applying the next finish.

Features

  • Aluminium oxide abrasive: Durable cutting grain for the intended surface preparation applications.
  • Flexible paper backing: Latex-coated support material combines flexibility with stability.
  • Dust-repellent treatment: Helps the abrasive remain effective as sanding residue is produced.
  • Single-grit supply: All 50 sheets are P120.

Benefits

  • Efficient grit changes: Move between preparation stages easily with the StickFix system.
  • Controlled preparation: Use the long sheet with a suitable machine or hand block to maintain supported contact over the working area.
  • Versatile handling: Use full sheets on the listed 400 mm tools or halve them for the specified 200 mm hand block.

Application

  • Refining cured repair compounds and fillers after initial shaping.
  • Preparing suitable primers and existing paintwork within an approved refinishing process.
  • Automotive panel repair and paintshop preparation.
  • Hand sanding with the compatible HSK-A blocks where additional control is useful.

Extra Information

  • Product identification: Festool order number 493178 identifies the Titan 2 P120, 50-sheet version.
  • Model designation: STF 80x400 P120 TI2/50 specifies the format, grit, abrasive range and pack quantity.
  • Sheet preparation: When halving sheets for the HSK-A 80x200, cut neatly and check the fit and extraction opening alignment.

Where P120 Fits

P120 is finer than P80 and coarser than P180. It can help remove the scratch pattern from an earlier sanding stage before progressing further. Inspect the surface between grades rather than relying on sanding time alone.

Support the Abrasive Correctly

A clean, sound sanding pad helps retain the sheet and maintain even contact. Keep extraction openings aligned and use effective dust extraction to remove loose sanding residue.

Pro Tips

  • Allow fillers and coatings to cure sufficiently before sanding.
  • Use a suitable guide coat when checking repaired surfaces for remaining scratches or uneven areas.
  • Apply moderate pressure and keep the tool supported to avoid cutting hollows or rounding edges.
  • Replace a worn or heavily loaded sheet when its cutting performance drops.

How to Use

  • Confirm that P120 suits the material and preparation stage.
  • Before changing sheets on an LRS 400, disconnect the compressed air supply according to the machine’s instructions.
  • Check that the StickFix pad is clean and undamaged. Halve the sheet first if using the HSK-A 80x200.
  • Align the sheet with the pad outline and extraction openings, then press it firmly into place.
  • Connect appropriate dust extraction and sand with controlled, overlapping movements and moderate pressure.
  • Inspect the surface, remove sanding residue and continue with the next specified grit or finishing stage.

Safety

  • Wear suitable eye, hearing and respiratory protection for the tool and material.
  • Use appropriate dust extraction, particularly when sanding repair compounds, primers or old coatings.
  • Disconnect the LRS 400 from its compressed air supply before changing abrasives or servicing the pad.
  • Secure the workpiece, inspect the sheet before use and follow the sanding tool’s operating instructions.

Specifications

Description Spec
BrandFestool
Cat No.FES493178
Festool Order Number493178
ModelSTF 80x400 P120 TI2/50
Product TypeRectangular abrasive sheets
Abrasive RangeTitan 2
GritP120
Sheet Width80 mm
Sheet Length400 mm
Abrasive GrainAluminium oxide
BackingLatex-coated paper
Surface TreatmentStearate coating
AttachmentStickFix hook-and-loop
Compatible ToolsLRS 400; HSK-A 80x400; HSK-A 80x200 with sheet halved
Pack Quantity50 sheets
PackagingCarton

Scope of Delivery:

  • 50 x Festool Titan 2 StickFix abrasive sheets, 80 x 400 mm, P120.
Please note: Supplied as 50 full-size sheets. Sanding machine, hand sanding blocks and dust extraction equipment are available separately.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy