Menu
Your Cart

Festool PA-TS 75 Parallel Side Fence for TS 75 Plunge-Cut Saw

Festool PA-TS 75 Parallel Side Fence for TS 75 Plunge-Cut Saw
Festool PA-TS 75 Parallel Side Fence for TS 75 Plunge-Cut Saw
  • Brand: FESTOOL
  • Model: FES492243
  • Weight: 0.81kg
  • Dim: 407 mm x 263 mm x 59 mm
  • UPC: 4014549034026
Price:
R 2,170.05
Ex VAT: R 1,887.00

Available Options

Festool PA-TS 75 Parallel Side Fence for TS 75

At a Glance: Adjustable parallel fence for the Festool TS 75, with mounting on either side of the saw. Supports parallel cutting from an existing workpiece edge and can also serve as a table extension.

Make consistent parallel cuts with your Festool TS 75 using the PA-TS 75 parallel side fence. This practical accessory guides the saw along an existing workpiece edge, helping maintain a set distance between the edge and the cut. It is particularly useful for ripping boards and panel materials, where a straight reference edge is already available.

The fence can be fitted on the saw blade side or the motor side to suit the required cutting arrangement. Its aluminium and steel construction provides a sturdy guiding assembly, while the alternative table-extension function adds versatility to your TS 75 setup. For repeated cuts, retain the setting and verify the finished dimension on a test piece before continuing.

Parallel Guidance Directly from the Workpiece Edge

The PA-TS 75 uses the workpiece edge as its reference. A straight, clean edge allows the fence to guide the saw consistently; an uneven edge can transfer its irregularities to the cut.

Product Highlights

  • Designed for the TS 75: A dedicated parallel fence for the Festool plunge-cut saw.
  • Mounting on either side: Choose the blade-side or motor-side arrangement for the required application.
  • Blade-side adjustment: Specified workpiece widths from 1 mm to 100 mm.
  • Motor-side adjustment: Specified workpiece widths from 176 mm to 232 mm.
  • Additional support function: Can also be configured as a table extension.
  • Sturdy construction: Aluminium and steel components form the guiding assembly.

Product Compatibility

  • Compatible saw: Festool TS 75 plunge-cut saw.
  • Mounting location: Fits the saw’s designated parallel-fence mounting points.
  • Reference surface: Requires a suitable workpiece edge for edge-guided parallel cutting.
  • Other saw models: Confirm the correct fence article for your machine before ordering; this accessory is designated PA-TS 75.

Adjustment range note: The stated ranges depend on the mounting side: 1–100 mm on the saw blade side and 176–232 mm on the motor side. These are separate ranges, not a continuous 1–232 mm adjustment range.

Features

  • Adjustable parallel guide: Sets the cutting position relative to the reference edge.
  • Two mounting arrangements: Can be installed on either side of the saw.
  • Table-extension capability: Offers an additional support configuration.
  • Metal construction: Uses aluminium and steel for a sturdy assembly.
  • 10 mm lower projection: Extends below the machine table and requires clearance beneath the saw base.

Benefits

  • Maintain a consistent offset: Follow an existing edge while keeping the cut parallel to it.
  • Simplify repeated settings: Retain a checked adjustment when preparing matching components.
  • Adapt the cutting arrangement: Select the mounting side appropriate to the required width and support.
  • Guide without a rail: Use a suitable workpiece edge as the cutting reference.
  • Add versatility: Use the alternative table-extension function where the setup permits.

Application

  • Ripping boards parallel to an existing straight edge.
  • Cutting panel materials to a set edge offset.
  • Preparing repeated parallel components within the specified adjustment ranges.
  • Guiding suitable groove cuts with the TS 75, following the saw’s operating instructions.
  • Providing additional support in the table-extension configuration.

Extra Information

  • Vermont Sales product code: FES492243.
  • Festool article number: 492243.
  • Model designation: PA-TS 75.
  • Primary function: Edge-referenced parallel cutting with the TS 75.
  • Alternative function: Table extension.

Prepare the Reference Edge

Check the edge for bowing, damage and protruding material before setting up the fence. Parallel guidance maintains the relationship to that edge; it does not straighten an unsuitable reference surface.

Check the Finished Dimension

Confirm which side of the blade produces the required component and account for the saw kerf. A trial cut is the most practical way to verify the finished width before cutting valuable material.

Allow Clearance Below the Base

The fence projects 10 mm below the machine table. Position supports and clamps so the assembly can travel freely throughout the cut without catching or lifting the saw.

Pro Tips

  • Use a straight, continuous edge as the fence reference.
  • Check that all adjustments are secure before each cutting sequence.
  • Make a test cut after changing the fence setting or blade.
  • Support both the workpiece and offcut so neither can move unexpectedly or pinch the blade.
  • Keep the fence contact surface clear of chips that could disturb guidance.

How to Use

  • Disconnect the TS 75 from power before installing or adjusting the fence.
  • Select the mounting side that provides the required adjustment range.
  • Install the fence in the designated mounting points according to the saw’s operating instructions.
  • Set the required offset and tighten the securing components.
  • Check that the fence follows the reference edge and that the assembly clears all supports and clamps.
  • Set the cutting depth, connect suitable dust extraction and make a trial cut on scrap material.
  • Measure the result and adjust if necessary before making the production cut.
  • Maintain steady guidance against the reference edge without forcing the saw sideways.

Safety

  • Read and follow the TS 75 operating instructions before fitting or using the fence.
  • Disconnect the saw from power before installation, adjustment or removal.
  • Wear suitable eye, hearing and respiratory protection and use appropriate dust extraction.
  • Secure and support the workpiece, keeping hands clear of the blade and cutting path.
  • Check that the fence is firmly secured and cannot contact the blade.
  • Ensure the fence clears supports and clamps throughout the cut.
  • Plan narrow cuts carefully; the minimum adjustment dimension does not establish that every workpiece can be safely supported or held.
  • Allow the blade to stop completely before lifting the saw or handling the offcut.

Specifications

Description Spec
BrandFestool
Product Description:Plunge-cut saw parallel side fence
Cat No.FES492243
Festool Article Number492243
ModelPA-TS 75
Compatible SawFestool TS 75
ConstructionAluminium and steel
Mounting OptionsSaw blade side or motor side
Workpiece Width – Blade-Side Mounting1–100 mm
Workpiece Width – Motor-Side Mounting176–232 mm
Projection Below Machine Table10 mm
Additional FunctionCan be used as a table extension
Quantity1 fence assembly

Scope of Delivery:

  • 1 × Festool PA-TS 75 parallel side fence assembly.

Scope of delivery note: TS 75 saw, saw blade, guide rail, workbench and workpiece are not included.

Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy