Menu
Your Cart

Festool WH-CE CENTROTEC FastFix Quick-Change Tool Chuck

Festool WH-CE CENTROTEC FastFix Quick-Change Tool Chuck
Festool WH-CE CENTROTEC FastFix Quick-Change Tool Chuck
  • Brand: FESTOOL
  • Model: FES492135
  • Weight: 0.06kg
  • Dim: 120 mm x 51 mm x 40 mm
  • UPC: 4014549034323
Price:
R 1,055.13
Ex VAT: R 917.50

Available Options

Festool WH-CE CENTROTEC FastFix Quick-Change Tool Chuck

At a Glance: Compact 37 mm construction length | FastFix machine connection | Quick-change CENTROTEC accessory holder | For drilling, countersinking and screwdriving.

Keep assembly work moving with the Festool WH-CE CENTROTEC tool chuck. Designed to fit the FastFix tool reception on compatible Festool drills, this compact attachment lets you change between CENTROTEC drilling and screwdriving accessories in seconds. Its short construction improves access where working space is limited, while the CENTROTEC system provides accurate guidance with the accessory shank extending into the drill spindle. From pilot holes and countersinking to driving the final screw, the WH-CE CENTROTEC makes repeated accessory changes quick and straightforward. It supports a broad range of purpose-made accessories, including bit holders, wood and masonry drill bits, Forstner bits and drill countersinks.

Compact Design with Precise Guidance

The CENTROTEC system supports the accessory at two points and guides its shank into the drill spindle, helping improve concentric running and control. Festool describes the chuck as 50% smaller and 80% lighter than a conventional drill chuck, with a construction length of just 37 mm.

Product Highlights

  • Fast accessory changes: Switch between compatible drilling, countersinking and screwdriving tools without tightening chuck jaws.
  • Short construction: The 37 mm chuck body helps reduce the clearance needed in confined working areas.
  • Improved run-out accuracy: CENTROTEC guidance helps keep compatible accessories running concentrically.
  • FastFix attachment: Fit or remove the chuck from a compatible machine without additional tools.
  • Versatile accessory system: Accommodates a wide selection of CENTROTEC tools for installation and assembly.
  • Impact-resistant design: Supports suitable CENTROTEC masonry drill bits when used with an appropriate machine and operating mode.

Product Compatibility

  • Festool cordless drills: Fits models equipped with the appropriate FastFix tool reception.
  • Festool cordless percussion drills: Compatible with machines featuring the specified FastFix connection.
  • Festool corded drills and percussion drills: Fits suitable FastFix-equipped models, excluding direct fitting to DR 20 and DRP 20.
  • CENTROTEC accessories: Accepts accessories with the dedicated CENTROTEC shank, including drill bits, countersinks and bit holders.
  • Standard screwdriver bits: Use through a suitable CENTROTEC bit holder, such as BHS 60 CE or BH 60 CE-Imp, available separately.
  • Other drills with conventional chucks: The separately available BA-CE drill adapter, order number 496450, enables connection of the WH-CE CENTROTEC.

Check Both Connections

The machine requires a compatible FastFix reception for direct fitting, and accessories require a CENTROTEC shank. Standard screwdriver bits need a suitable CENTROTEC bit holder. Conventional round-shank drill bits should be held in an appropriate standard drill chuck.

Features

  • Quick-release accessory retention: A release ring allows rapid insertion and removal of CENTROTEC tools.
  • Separate chuck attachment: The FastFix connection allows the complete chuck to be exchanged when changing the machine setup.
  • Direct spindle engagement: Compatible accessory shanks engage with the drill spindle as part of the CENTROTEC system.
  • Compact, lightweight construction: Reduces bulk at the front of the drill.

Benefits

  • Less interruption: Move between pilot drilling, countersinking and screwdriving with fewer setup delays.
  • Better access: Work more conveniently inside cabinets and other restricted spaces.
  • Easier handling: Reduced chuck bulk helps make repetitive assembly work more comfortable.
  • Flexible working: Use a compatible drill for several operations by changing the accessory.

Application

  • Furniture assembly, cabinet installation and kitchen fitting.
  • Drilling pilot holes before inserting screws.
  • Countersinking and combined drilling/countersinking with suitable CENTROTEC accessories.
  • Installing fittings, hinges, brackets and trim.
  • Drilling wood, metal or masonry with accessories and machine settings suited to the material.

Extra Information

  • Stock code: FES492135.
  • Festool order number: 492135.
  • Model designation: WH-CE CENTROTEC.
  • System expansion: CENTROTEC bit holders, drill bits, countersinks and adapters are selected separately to suit the work.

FastFix and CENTROTEC Explained

FastFix is the connection between the compatible machine and the chuck. CENTROTEC is the accessory interface used by the chuck. Together, they allow both chuck changes and accessory changes without a chuck key.

Using Standard Screwdriver Bits

A compatible CENTROTEC bit holder provides the connection for ordinary screwdriver bits. For example, the BHS 60 CE holds 25 mm standard bits while its CENTROTEC shank locks into the WH-CE chuck.

Pro Tips

  • Prepare the required drill bit, countersink and bit holder before starting repetitive assembly work.
  • Keep the accessory shank and chuck connection free of chips and dust so the locking mechanism can seat correctly.
  • Check that both the chuck and accessory are securely retained after every change.
  • Choose accessory length to balance access, clearance and control.

How to Use

  • Switch off the machine and remove its battery or disconnect the mains supply before changing the chuck or accessory.
  • Remove the existing FastFix attachment according to the machine's instructions.
  • Pull the chuck attachment release ring forwards, slide the WH-CE CENTROTEC onto the drill spindle and release the ring.
  • Pull back the green accessory release ring and insert a CENTROTEC accessory. Rotate it slightly until its hexagonal shank engages with the spindle.
  • Release the green ring and check that the accessory and chuck are securely locked.
  • Select the appropriate speed, torque and operating mode for the accessory and material before reconnecting power.
  • To exchange the accessory, stop and isolate the machine, pull back the green release ring and remove the tool.

Safety

  • Read the host machine's operating instructions before fitting or using the chuck.
  • Disconnect the power supply or remove the battery before changing attachments or accessories.
  • Use compatible, undamaged accessories and confirm that the locking mechanisms engage fully.
  • Wear eye protection, with hearing and dust protection appropriate to the material and task.
  • Secure the workpiece and keep hands, loose clothing and hair clear of rotating parts.
  • Allow hot drill bits to cool and handle sharp cutting edges carefully during changes.

Specifications

Description Spec
BrandFestool
Cat No.FES492135
Manufacturer Order No.492135
ModelWH-CE CENTROTEC
Product TypeQuick-change tool chuck
Machine ConnectionFastFix
Accessory InterfaceCENTROTEC
Construction Length37 mm
Accessory ChangeTool-free quick-release mechanism
DesignCompact, lightweight and impact-resistant
Main ApplicationsAssembly work, drilling and screwdriving
Direct-Fit ExclusionsDR 20 and DRP 20
Optional Drill AdapterBA-CE, Festool order number 496450
Quantity1 tool chuck

Scope of Delivery:

  • 1 x Festool WH-CE CENTROTEC tool chuck.
Scope of delivery note: Drill, battery, drill bits, screwdriver bits, CENTROTEC bit holders and BA-CE adapter are supplied separately.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy