Menu
Your Cart

Festool HW S8 D6/30 Z Dowel Drill Router Bit 6 mm with 8 mm Shank

Festool HW S8 D6/30 Z Dowel Drill Router Bit 6 mm with 8 mm Shank
Festool HW S8 D6/30 Z Dowel Drill Router Bit 6 mm with 8 mm Shank
Festool HW S8 D6/30 Z Dowel Drill Router Bit 6 mm with 8 mm Shank
Festool HW S8 D6/30 Z Dowel Drill Router Bit 6 mm with 8 mm Shank
Festool HW S8 D6/30 Z Dowel Drill Router Bit 6 mm with 8 mm Shank
  • Brand: FESTOOL
  • Model: FES491067
  • Weight: 0.04kg
  • Dim: 102 mm x 53 mm x 53 mm
  • UPC: 4014549001691
Price:
R 1,240.85
Ex VAT: R 1,079.00

Available Options

Festool HW S8 D6/30 Z Dowel Drill Router Bit

At a Glance: 6 mm dowel drill with a centring point, 30 mm working length and 8 mm shank. Designed for guided drilling with compatible Festool routers.

Create accurately positioned dowel holes with the Festool HW S8 D6/30 Z. This specialist router accessory combines a 6 mm cutting diameter with a brad point that helps guide the cutter as it enters the workpiece. Its geometry is optimised for the high cutting speeds encountered when drilling with a router, making it a useful addition to furniture-making and cabinetmaking setups. Use it for individual dowel holes with suitable guidance or combine it with an appropriate hole-drilling system for repeated positions. The 8 mm shank fits the matching router collet, while the compact 53.5 mm overall length supports a clearly defined, purpose-built drilling configuration.

Purpose-designed for dowel drilling with a router

The centring point helps establish the hole position at entry. Accurate spacing and alignment come from combining the cutter with a correctly set router, secure workholding and a suitable drilling guide or fixture.

Product Highlights

  • 6 mm cutting diameter: Produces holes for applications requiring this nominal bore size.
  • Brad-point design: The centring point helps guide the cutter into the workpiece.
  • Router-speed geometry: Developed for dowel drilling at the high cutting speeds used with routers.
  • 8 mm shank: Fits the correct 8 mm router collet.
  • 30 mm working length: Provides the specified usable cutting length for planning the drilling setup.
  • Hole-series capability: Suitable for repeated drilling when used with an appropriate hole-drilling system.

Product Compatibility

  • Festool OF 900 and OF 1000: Listed compatible routers when equipped with the correct 8 mm collet.
  • Festool OF 1010 and OF 1010 R: Suitable for guided dowel-drilling applications.
  • Festool OF 1400: Listed compatible router with the appropriate collet and drilling setup.
  • Drilling guides and fixtures: Check that the selected system supports the cutter diameter, required hole positions and intended drilling depth.

Shank Size and Hole Depth

The cutting diameter is 6 mm, while the shank diameter is 8 mm. Use an 8 mm collet. The 30 mm working length is a cutter dimension; establish the actual drilling depth using the router’s depth stop, allowing for the centring point and workpiece thickness.

Features

  • HW cutting material: Carbide cutting material for woodworking applications.
  • Centring point: Supports guided entry at the selected drilling position.
  • Defined cutter dimensions: 6 mm diameter, 30 mm working length and 53.5 mm overall length.
  • Router-compatible shank: 8 mm shank for secure clamping in the matching collet.

Benefits

  • Controlled hole placement: Combine the centring point with suitable guidance to locate dowel holes accurately.
  • Repeatable project setup: Use a drilling fixture and depth stop to reproduce hole positions and depths.
  • Convenient router integration: Carry out dowel drilling using the listed Festool router models.
  • Useful for matched components: Prepare corresponding holes for furniture and cabinetry assembly.

Application

  • Drilling 6 mm dowel holes for woodworking joints.
  • Preparing matching holes in furniture components.
  • Guided drilling during cabinetmaking and joinery.
  • Producing repeated hole positions with a suitable hole-drilling system.

Extra Information

  • D: Cutting diameter, 6 mm.
  • NL: Working length, 30 mm.
  • GL: Overall length, 53.5 mm.
  • s: Shank diameter, 8 mm.

Plan the Joint Before Drilling

Set hole depth to suit the dowel length and joint arrangement. Make a trial joint in matching offcuts to check alignment, fit and assembly before drilling finished components.

Use a Consistent Reference Edge

Reference mating components from the same corresponding face or edge. This helps prevent alignment errors when transferring a drilling pattern between parts.

Keep the Cutting Area Clear

Use the router’s suitable extraction arrangement and clear accumulated chips as necessary. Stop the machine before inspecting the cutter or removing debris.

Pro Tips

  • Test the fit with the actual dowels intended for the project.
  • Mark reference faces before setting up mating components.
  • Check the depth stop after changing the cutter or drilling fixture.
  • Use controlled plunge movement and avoid forcing the cutter.
  • Clean resin and debris from the cutter before storage.

How to Use

  • Disconnect the router from its power source before fitting the cutter.
  • Inspect the cutter and clamp its 8 mm shank in the correct collet according to the router and cutter instructions.
  • Secure the workpiece and install the appropriate drilling guide or fixture.
  • Set the required drilling depth, accounting for the centring point and remaining material beneath the hole.
  • Select an operating speed permitted by the cutter and router instructions, and make a trial hole in an offcut.
  • Drill using controlled plunge movement. Retract the cutter and allow it to stop before repositioning or making adjustments.

Safety

  • Wear eye and hearing protection, and use suitable dust extraction and respiratory protection for the material.
  • Disconnect the router before changing cutters or adjusting the setup.
  • Use the correct collet and observe the specified shank insertion requirements.
  • Secure the workpiece and keep hands clear of the cutter.
  • Do not exceed the cutter’s marked maximum speed or use a damaged cutter.
  • Allow the cutter to stop completely before handling the workpiece or clearing chips.

Specifications

DescriptionSpec
BrandFestool
Cat No.491067
Stock CodeFES491067
ModelHW S8 D6/30 Z
Product TypeDowel drill router bit
Cutting MaterialHW carbide
Cutting Diameter D6 mm
Working Length NL30 mm
Overall Length GL53.5 mm
Shank Diameter s8 mm
Point DesignBrad point / centring point
Compatible RoutersOF 900, OF 1000, OF 1010, OF 1010 R, OF 1400
Quantity1 cutter

Scope of Delivery:

  • 1 × Festool HW S8 D6/30 Z dowel drill router bit.

Please Note

Router, collet, drilling guides, clamps and dowels are sold separately.

Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy