Menu
Your Cart

Festool HW S8 D22,7/R5 KL Roundover Cutter 5 mm Radius with 8 mm Shank and Two Guide Bearings

Festool HW S8 D22,7/R5 KL Roundover Cutter 5 mm Radius with 8 mm Shank and Two Guide Bearings
Festool HW S8 D22,7/R5 KL Roundover Cutter 5 mm Radius with 8 mm Shank and Two Guide Bearings
Festool HW S8 D22,7/R5 KL Roundover Cutter 5 mm Radius with 8 mm Shank and Two Guide Bearings
Festool HW S8 D22,7/R5 KL Roundover Cutter 5 mm Radius with 8 mm Shank and Two Guide Bearings
Festool HW S8 D22,7/R5 KL Roundover Cutter 5 mm Radius with 8 mm Shank and Two Guide Bearings
  • Brand: FESTOOL
  • Model: FES491012
  • Weight: 0.07kg
  • Dim: 102 mm x 53 mm x 53 mm
  • UPC: 4014549001189
Price:
R 2,253.43
Ex VAT: R 1,959.50

Available Options

Festool HW S8 D22,7/R5 KL Roundover Cutter – 5 mm Radius

At a Glance: 5 mm radius roundover cutter with a 22.7 mm cutting diameter, 12 mm cutting length and 8 mm shank. Includes 12.7 mm and 9.5 mm guide bearings for standard rounding and decorative edge profiling.

Bring smooth curves and decorative detail to your woodworking with the Festool HW S8 D22,7/R5 KL Roundover Cutter. Designed for profiling solid wood and suitable panel materials, this versatile cutter combines a 5 mm radius with two carbide cutting edges for durable performance. Use the 12.7 mm guide bearing to round a workpiece edge, or fit the smaller 9.5 mm bearing to create a decorative ovolo-style edge profile. The bearing follows a suitable reference surface to guide the cut, while screw fastening makes bearing changes straightforward. With an 8 mm shank and compatibility across the specified Festool routers, this cutter is a practical addition for finishing furniture, shelving, trim and joinery components.

Two Profile Options from One Cutter

The cutting radius remains 5 mm when the bearing is changed. The different bearing diameters alter the cutter's position relative to the reference edge, allowing a standard roundover or a decorative profile with an additional shoulder.

Product Highlights

  • 5 mm profile radius: Creates a rounded transition on suitable workpiece edges.
  • Two guide bearings included: 12.7 mm for rounding and 9.5 mm for decorative edge profiling.
  • Two carbide cutting edges: Support a long working life under suitable operating conditions.
  • Bearing-guided routing: Follows a suitable reference edge for consistent profiling.
  • Convenient bearing changes: The bearing assembly is secured by a screw.
  • 8 mm shank: Fits the appropriate 8 mm collet in a compatible router.
  • Solid wood and panel applications: Suitable for a range of furniture and joinery edge-finishing tasks.

Product Compatibility

  • Festool OF 900 and OF 1000: Listed by Festool for this cutter.
  • Festool OF 1010 and OF 1010 R: Listed by Festool for this cutter.
  • Festool OF 1400: Listed by Festool for this cutter.
  • Festool OF 2000: Listed by Festool for this cutter.
  • Festool OF 2200: Listed by Festool for this cutter.
  • Festool MFK 700: Listed by Festool for this cutter.
  • Festool MFKC 700: Listed by Festool for this cutter.

Compatibility note: Use the correct 8 mm collet and confirm cutter clearance, base configuration and permitted operating speed. Select the guide bearing for the required profile and check the setup on an offcut before routing the finished component.

Features

  • HW carbide cutting edges: Two carbide blades for profiling solid wood and suitable panel materials.
  • 5 mm roundover geometry: Produces a curved edge profile.
  • Interchangeable guide bearings: Supplied with 12.7 mm and 9.5 mm diameters.
  • Screw-fastened bearing assembly: Allows efficient bearing replacement.
  • 22.7 mm cutting diameter: Combined with a 12 mm cutting length and 52 mm overall length.

Benefits

  • Refined finished edges: Soften sharp corners or add a decorative edge detail.
  • Greater versatility: Change the bearing to obtain a different profile using the same cutter.
  • Consistent guidance: The bearing follows the reference edge throughout the cut.
  • Durable cutting performance: Two carbide edges support regular woodworking use.
  • Practical maintenance: Replace a guide bearing without replacing a serviceable cutter.

Applications

  • Rounding solid wood edges with a 5 mm radius.
  • Profiling suitable panel edges.
  • Creating decorative ovolo-style edge details with the smaller guide bearing.
  • Finishing shelving, furniture, trim and joinery components.
  • Producing matching profile arrangements with an appropriate complementary flute cutter.

Extra Information

12.7 mm Bearing for Rounding

The larger guide bearing positions the cutter for standard edge rounding. Set the router height so that the curved profile blends correctly into the adjoining workpiece faces.

9.5 mm Bearing for Decorative Profiling

The smaller bearing allows the cutter to reach farther into the edge. With the appropriate height setting, this creates a decorative shoulder alongside the rounded section.

Understanding the Model Designation

HW identifies carbide cutting material, S8 denotes the 8 mm shank, D22,7 identifies the 22.7 mm cutting diameter and R5 identifies the 5 mm profile radius. KL indicates a ball bearing guide.

The Reference Edge Affects the Result

The guide bearing follows the surface it contacts. Chips, dents or irregularities along that surface can affect the routed profile, so prepare a clean, sound reference edge before routing.

Radius and Cutting Length Are Different

The 5 mm radius describes the curved profile. The 12 mm cutting length describes the cutter's working section. Neither measurement should be treated as a recommendation to remove all the material in one pass.

Parts Numbers Matter

Important: Please confirm Festool article number 491012, the required 5 mm radius and the machine's 8 mm collet before ordering.

Pro Tips

  • Use matching scrap material to check the profile before machining the finished workpiece.
  • Choose the bearing first, then adjust the router height for the intended edge detail.
  • Check that the fitted bearing rotates freely and its retaining screw is secure.
  • Keep the router base, bearing and reference edge free from chips.
  • Maintain a steady feed and use suitable passes for the material and amount being removed.
  • Store the unused bearing safely with the cutter so that both profile options remain available.

How to Use

  • Disconnect the router from its power supply or remove its battery before installation.
  • Select the 12.7 mm bearing for standard rounding or the 9.5 mm bearing for decorative profiling.
  • If changing the bearing, follow the cutter instructions and check secure attachment and free rotation.
  • Install the cutter in the correct 8 mm collet, observing the specified insertion depth.
  • Secure the workpiece, check cutter clearance and connect suitable dust extraction.
  • Set the cutter height and appropriate operating speed, then make a test cut.
  • Inspect the profile and adjust the setup before routing the finished edge in the prescribed feed direction.
  • Allow the cutter to stop completely before putting down the router or inspecting the work.

Safety

  • Follow the router and cutter instructions before installation and use.
  • Disconnect the power supply or remove the battery before changing the cutter, bearing or settings.
  • Use the correct 8 mm collet and observe the specified insertion depth and permitted operating speed.
  • Do not use damaged cutting edges, loose bearing fasteners or a seized guide bearing.
  • Secure the workpiece and keep hands clear of the rotating cutter.
  • Wear suitable eye and hearing protection. Use dust extraction and respiratory protection appropriate to the material.
  • Allow the cutter to stop completely before handling the workpiece or putting down the machine.
  • Have sharpening and repairs carried out by a qualified specialist.

Specifications

Description Spec
BrandFestool
Product Description:Router Roundover Cutter
Cat No.FES491012
Festool Article Number491012
ModelHW S8 D22,7/R5 KL
Product TypeBearing-guided roundover and decorative edge cutter
Cutting Diameter (D)22.7 mm
Profile Radius (R)5 mm
Cutting Length (NL)12 mm
Overall Length (GL)52 mm
Shank Diameter (s)8 mm
Cutting Edge MaterialHW carbide
Number of Cutting Edges2
Included Guide Bearing Diameters12.7 mm and 9.5 mm
Bearing AttachmentScrew fastening
Recommended MaterialsSolid wood and suitable panel materials
Compatible MachinesOF 900, OF 1000, OF 1010, OF 1010 R, OF 1400, OF 2000, OF 2200, MFK 700 and MFKC 700
Quantity1 cutter with two guide bearings

Scope of Delivery:

  • 1 x Festool HW S8 D22,7/R5 KL roundover cutter, article 491012.
  • 1 x 12.7 mm guide bearing.
  • 1 x 9.5 mm guide bearing.
Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy