Menu
Your Cart

Festool HM 90/3,3 Carbide Jigsaw Blade for Laminate and HPL

Festool HM 90/3,3 Carbide Jigsaw Blade for Laminate and HPL
Festool HM 90/3,3 Carbide Jigsaw Blade for Laminate and HPL
  • Brand: FESTOOL
  • Model: FES204269
  • Weight: 0.02kg
  • Dim: 125 mm x 15 mm x 22 mm
  • UPC: 4014549350447
Price:
R 1,231.08
Ex VAT: R 1,070.50

Available Options

Festool Jigsaw Blade PLASTICS LAMINATE HM 90/3,3

At a Glance: Carbide cutting edge | 90 mm cutting blade length | 3.3 mm tooth pitch | For straight cuts in laminate and HPL | Maximum workpiece thickness 30 mm | 1 blade

Order number: FES204269
Model: HM 90/3,3

Take on demanding laminate cutting with the Festool HM 90/3,3 PLASTICS LAMINATE jigsaw blade. Designed for straight cuts in laminate, HPL panels and boards bonded with melamine resin, its carbide cutting edge offers high resistance to heat and wear for a long service life in abrasive materials. The 3.3 mm tooth pitch supports controlled cutting through suitable workpieces up to 30 mm thick, while the T-shank fitting allows straightforward installation in compatible jigsaws. A practical choice for interior fitting and panel fabrication, this specialist blade is also suitable for fibre cement and plasterboard when used with appropriate cutting and dust control procedures.

HM Carbide for Abrasive Laminates

HM identifies the blade's carbide cutting material. Carbide provides resistance to wear and elevated cutting temperatures, making it particularly useful for laminates and resin-bonded boards that place demanding conditions on the cutting edge.

Product Highlights

  • Specialised laminate blade: Developed for laminate and boards bonded with melamine resin.
  • Carbide cutting edge: Provides long service life when working with suitable abrasive materials.
  • Straight cutting application: Particularly suited to straight cuts in HPL laminated boards.
  • T-shank fitting: Enables convenient blade replacement in compatible jigsaws.
  • Red application coding: Identifies the blade within Festool's PLASTICS blade category.
  • Additional material capability: Also suitable for fibre cement and plasterboard.

Product Compatibility

  • Festool PS 300 and PSB 300: Compatible TRION jigsaws.
  • Festool 400 series: PS 400, PSB 400, PSC 400 and PSBC 400.
  • Festool 420 series: PS 420, PSB 420, PSC 420 and PSBC 420.
  • Festool PSC 500 and PSBC 500: Compatible cordless jigsaw models.
  • Festool PSC-E 18: Listed by Festool as compatible.
  • Other compatible T-shank jigsaws: Confirm acceptance of the blade, guide clearance and intended material in the machine manufacturer's instructions.

Observe the 30 mm Material Limit

The stated maximum workpiece thickness is 30 mm. The 90 mm cutting blade length does not indicate a 90 mm material cutting capacity. Check the complete panel or worktop thickness and the jigsaw's operating limits before cutting.

Features

  • Wear-resistant carbide: Suits demanding cutting conditions in laminate and resin-bonded panels.
  • 3.3 mm tooth pitch: Provides the specified tooth spacing for this specialist application.
  • 90 mm cutting blade length: For use within the published material thickness limit.
  • 1.7 mm cutting width: Defines the blade's nominal cutting kerf.
  • 1.25 mm blade thickness: Specifies the thickness of the blade body.
  • T-shank connection: Fits compatible blade clamps.

Benefits

  • Longer working life in abrasive panels: Carbide resists the wear associated with demanding laminate materials.
  • Purposeful blade selection: Choose a cutting edge developed for the material being processed.
  • Convenient identification: The PLASTICS LAMINATE designation and red colour coding simplify selection.
  • Practical versatility: Covers several suitable panel materials within the stated thickness limit.

Application

  • Straight cuts in laminate and HPL laminated boards.
  • Cutting suitable kitchen worktop panels up to 30 mm thick.
  • Processing boards bonded with melamine resin.
  • Cutting suitable Trespa and Resopal panels.
  • Cutting fibre cement with appropriate dust control.
  • Cutting plasterboard where a jigsaw is appropriate to the task.

Extra Information

  • Application category: PLASTICS LAMINATE.
  • HM: Identifies carbide cutting material.
  • Recommended speed: Festool setting 1–3.
  • Pendulum action: Switch off for the recommended application.
  • Blade selection: Match the material, thickness and cut type before starting.
  • Quantity: Supplied as one jigsaw blade.

Recommended Machine Settings

Festool recommends speed setting 1–3 with pendulum action switched off. These are machine setting recommendations, not a universal strokes-per-minute specification. Follow the relevant jigsaw instructions and check the result on an offcut.

Support the Panel During Cutting

Clamp the workpiece securely and support it close to the cutting area. Arrange the support so the blade can move freely beneath the panel and the offcut cannot close against the blade.

Check the Visible Face

Test an offcut to establish the best cutting orientation for the surface finish. Where supported by the jigsaw, use the appropriate splinterguard and keep the base firmly against the workpiece.

Pro Tips

  • Measure the full workpiece thickness before selecting the blade.
  • Use steady feed pressure and allow the cutting edge to work without forcing it.
  • Keep the jigsaw aligned with the cut to avoid twisting or side-loading the blade.
  • For internal cut-outs, prepare a suitable starting hole with sufficient blade clearance.
  • Inspect the carbide edge before use and replace the blade if damaged.
  • Use extraction and respiratory protection appropriate to the panel material.

How to Use

  • Confirm that the material is suitable and the workpiece does not exceed 30 mm in thickness.
  • Disconnect the jigsaw from its power supply or remove its battery before installing the blade.
  • Fit the T-shank securely and adjust the blade guides according to the jigsaw's instructions.
  • Mark the cut, secure the panel and provide clearance beneath the entire blade path.
  • Connect suitable dust extraction and fit any appropriate splinterguard.
  • Select the recommended speed setting of 1–3 and switch pendulum action off.
  • Make a test cut, then follow the marked line with controlled feed pressure and the base supported against the workpiece.
  • Allow the blade to stop completely before withdrawing it or setting the machine down.
  • Let the blade cool before handling or removal, then inspect it and store it safely.

Safety

  • Wear suitable eye, hearing and respiratory protection for the cutting task.
  • Use appropriate dust extraction, particularly when cutting fibre cement or plasterboard.
  • Never cut material containing asbestos.
  • Disconnect the power supply or remove the battery before changing the blade or adjusting its guides.
  • Secure the workpiece and keep hands clear of the blade path above and below the panel.
  • Do not use a bent, cracked or damaged blade.
  • Allow the blade to stop and cool before handling it.

Specifications

Description Spec
BrandFestool
Cat No.FES204269
Festool Article Number204269
ModelHM 90/3,3
Product TypeJigsaw blade
Application CategoryPLASTICS LAMINATE
Cutting MaterialCarbide (HM)
Shank TypeT-shank
Length of Cutting Blade90 mm
Tooth Pitch3.3 mm
Maximum Workpiece Thickness30 mm
Cutting Width1.7 mm
Blade Body Thickness1.25 mm
Recommended Cut TypeStraight cuts
Recommended Festool Speed Setting1–3
Recommended Pendulum SettingOff
Application Colour CodeRed
Quantity in Pack1 blade

Scope of Delivery:

  • 1 x Festool HM 90/3,3 PLASTICS LAMINATE carbide jigsaw blade.

Scope of delivery note: Blade only. Jigsaw, guides, splinterguard and dust extraction equipment are supplied separately.

Cookie Notice:
We Use Cookies... In addition to the cookies that are strictly necessary for the operation of this website, Vermont Sales uses cookies and other tracking tools to remember your preferences and to measure our website performance. Rest assured, your information is safe with us and we will NEVER share it with any other party. Privacy Policy